• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.737-743
• /
• 2000

Polyquinonediimines (PQDI) which have stable structure on heat and contains mono-azobenzene in the side chain were synthesized by means of condensation polymerization under TiCl$_4$. The synthesized monomers and polymers were identified by FT-IR, $^1$H-NMR, and elementary analysis. Especially, PQDI was comfirmed by the double-bonding peak of >C=N appeared near 1625 $cm^{-1}$ / by means of FT-IR spectrum. PQDI containing mono-azobenzene group in both side chains wat not soluble in non-polar solvents at all but partially soluble in the polar solvents having small dielectric constant, and dissolved in the strong acid such as sulfuric acid and $CH_3$SO$_3$H. Molecular weight distribution of PQDI measured by GPC showed 1.74. It was confirmed through X-ray diffraction analysis that the polymer was partially crystalline at the low angle region, but amorphous after heat treatment at 1$25^{\circ}C$. The glass transition temperature (T$_{g}$ ) of synthesized polymer was measured as 1$25^{\circ}C$ by differential scanning calorimetry. The SHG value for $\chi$$^{(2)}$ after poling at 1$25^{\circ}C$ was 8.6 pm/V (λ=1.542 ${\mu}{\textrm}{m}$). The SHG value slowly decreased with time from the start but appeared temporal stability after 100 hours.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.125-131
• /
• 2001

In this study, we compared the properties of 23 high and 55 low price sunglass lenses with the standards in the ordinary optical properties, materials, coloration, UV, IR and luminous transmittance, color acceptance for traffic signal, chromaticity and contrast sensitivity. The ordinary optical properties of the lenses met comparatively the requirements of the KS standard. The HIGH-type and LOW-type lenses were primarily made by glass and acrylate, respectively. In the coloration, HIGH-type was in group around neutral color but LOW-type was distributed widely on the line between 570 nm and 485 nm. There are fails in 7% of HIGH-type and 18% of LOW-type in the stimulus purity of the luminous transmittance. Wavelength of the UV/VIS cut-off was over 350 nm for HIGH-type but 6% of LOW-type was under 350 nm. In the erythemal UV, all HIGH-type met the needs of standards but 5 LOW-type failed with DIN standard In the near UV, KS standard worked in stringency, and HIGH-type showed more failure than LOW-type. The characteristics of the IR transmittance of HIGH-type was better than that of LOW-type. In the color acceptance of traffic signal, all HIGH-type met the needs of ANSI standards but 21.8% of LOW-type failed with the standard. In the contrast sensitivity tested with various coloured sunglasses, the value increased with increasing of Land decreasing of test distance. In view of the results so far, HIGH-type met with excellent properties as compared with LOW-type.

• The Journal of the Korea Contents Association
• /
• v.19 no.11
• /
• pp.527-548
• /
• 2019

For Deleuze, the frame is a closed system with numerous subsets of information. the frame can be defined by mathematics and physics. it is a geometric system of equilibrium and harmony with variables or coordinates. like paintings, Linear perspective represents a three-dimensional depth in a two-dimensional plane through vanishing points, horizontal lines in the frame. Linear perspective makes it possible to assume the infinity towards the vanishing point and the infinity towards the outside of the frame, the opposite of the vanishing point. Not only figures and lines in the drawing paper, but also the space between the figures and lines in the drawing paper was recognized. that is space, the 3rd dimension. with the centripetal force and centrifugal force of the frame, frame follow the physical rules of power and movement. de framing is against the dominant linear perspective and central tendency of the frame. The film contains four-dimensional time while reproducing three-dimensional space in two dimensions. It may be that the outside of the frame, or outside the field of view, contains thought, the fifth dimension.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.2
• /
• pp.330-346
• /
• 1997

Korea Multi-Purpose Satellite I (KOMPSAT-I, the first multi-purpose Korean satellite) will be launched in the third quarter of 1999, which is operated on the sun-synchronous orbit for cartography, ocean color monitoring, and space environment monitoring. The main mission of Electro-Optical Camera(EOC) which is one of KOMPSAT-I sensors is to provide images for the production of scale maps of Korea. EOC collects panchromatic imagery with the ground sample distance of 6.6m at nadir through visible spectral band of 510~730nm. For determining KOMPSAT-I crossing time over Korea, this study examines the diurnal variation of solar and atmospheric variables that can exert a great influence on the EOC imagery. The results are as follows: 1) After 10:30 a.m. at the winter solstice, solar zenith angle is less than $70^{\circ}$ and expected flux of EOC spectral band over land for clear sky is greater than about $2.4mW/cm^2$. 2) For daytime the distribution of cloud cover (clear sky) shows minimum (maximum) at about 11:00 a.m. Although the occurrence frequency of poor visibility by fog decreases from early morning toward noon, its effect on the distribution of clear sky is negligible. From the above examination it is concluded that determining KOMPSAT-I crossing time over Korea between 10:30 and 11:30 a.m. is adequate.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.1
• /
• pp.277-290
• /
• 1995

The study was carried out to analyze the fracture behavior and the acoustic emission(AE) characteristics and to find the relationship among tensile strength, fracture toughness and cure pressure in owe process of the carbon fiber reinforced composites of two types, $[0^{\circ}/90^{\circ}]_{2S}$ and $[0^{\circ}\;_2/90^{\circ}\;_2]_S$. AE signals were detected during the curing process, tensile tests and fracture toughness tests by acoustic emission(AE) measurements, respectively. Tensile strengths showed that the less cure pressurizing steps and the side of $[0^{\circ}/90^{\circ}]_{2S}$ specimens had the higher strengths than those of the others. Fracture toughness by the change of test temperature showed nearly same values in the same temperature region, but the higher test temperature had the lower fracture toughness values. In order to examine the relationship between fracture behavior of CFRP in tensile and fracture toughness tests and AE signals, the post processing for AE parameters of AE data and the observations of microscope and SEM have been carried out respectively.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.473-490
• /
• 2015

There are diverse sea areas within the coverage of GOCI which is observed around the Korea at one-hour intervals. It includes not only very clear ocean of East Sea, but also extremely turbid waters of the Yangtze River estuary. In this study, we analyzed the different optical characteristics of various sea areas using absorption coefficients of phytoplankton, Suspended Particulate Matter(SPM), Dissolved Organic Matter(DOM). Totally 959 sets of bio-optical and marine environmental data were obtained from 2009 to 2014 around the sea area of Korea. The East Sea, South Sea, East China Sea and offshore part of Yellow Sea showed similar pattern having high levels of contribution of phytoplankton and DOM. On the other hands, the coastal part of Mokpo and Gyeonggi Bay showed opposite pattern having high levels of contribution of SPM and DOM. As a result of the algorithm performance for chlorophyll-a(Chl-a) and SPM, Chl-a is mostly overestimated and SPM is mainly tended to be underestimated. Large amount of errors are induced by the SPM rather than the chl-a and DOM. These errors are primarily founded in the coastal waters having relatively high levels of $a_{SPM}$ contribution of more than 60%.

• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.66-71
• /
• 1998

Two kinds of $Ga_2S_3:Er$ (type A and type B) single crystals were grown by the chemical transport reaction method using iodine as a transport agent. The single crystals were crystallized into a monoclinic structure. The optical energy band gaps were found to 3.375 eV for the $Ga_2S_3:Er$ (type A) single crystal and 3.365 eV fir the $Ga_2S_3:Er$ (type B) single crystal at 13K. When the $Ga_2S_3:Er$ (type A and type B) single crystals were excited by the 325 nm-line of a Cd-He laser, Photoluminescence spectra of the $Ga_2S_3:Er$ (type A) single crystal exhibited blue emission band peaked at 444 nm and green and red emission bands peaked at 518 nm and 690 nm. Pgitikynubescebce soectra if the $Ga_2S_3:Er$ (typeB) single crystal showed green and red emission bands peaked at 513 nm and 695 nm. Sharp emission peaks in the two kinds if $Ga_2S_3:Er$ single crystal were observed near 525 nm, 553 nm, 664 nm, 812 nm, 986 nm, and 1540 nm and analysed as originating from the electron transitions between the energy levels of $Er^{3+}$ ion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.259-260
• /
• 2011

대기압 플라즈마는 멸균과 살균, 지혈, 피부재생, 치아 미백 등 여러 의학 분야를 대상으로 그 효과를 나타내고 있으며, 플라즈마 장비를 만들어 내기 위해 부피가 큰 진공 장비가 필요하지 않다는 점에서 대기압 플라즈마는 그 활용과 효과에 있어 큰 기대를 받고 있다. 대기압에서 플라즈마는 다양한 주파수를 이용하여 만들어져 왔으며, 본 연구실에서 연구하고 있는 수백 MHz-수 GHz 대역의 파워를 사용하는 플라즈마의 경우 대기압 플라즈마를 의학 분야에 사용할 때 만족해야 할 조건들에 만족하는 특성을 보여준다. 기존의 고주파를 사용하는 장비의 경우 추가적인 Matching 장비로 인해 플라즈마를 만들기 위해 큰 장비와 높은 파워가 필요한 단점이 있었다. 하지만 이 마이크로웨이브 장비는 전송선 이론을 기반으로 장비 자체가 구조적인 Matching이 이루어 지도록 설계되었다(그림 1). 즉, 추가적인 Matching 장비의 필요 없이 외부에서 파워를 주는 것만으로 플라즈마를 발생 시킬 수 있으며, 50% 이상의 파워 효율을 보여준다. 또한 그 크기도 손에 쥐고 사용할 수 있을 볼펜 정도의 크기이며, 3W의 정도의 저 전력으로 플라즈마를 발생 시켰다. 높은 에너지를 가지는 전자들은 공급되는 기체뿐만 아니라, 주변 공기와의 반응하여 여러 응용분야에 적합한 활성 종을 다량 만들어내게 된다. 본 연구실의 강점인 플라즈마 시뮬레이션으로 얻은 결과에서 주파수가 올라 갈수록 높은 에너지를 가지는 전자들이 많아지는 것을 보여준다. 그리고 발생시킨 플라즈마의 광학 특성에서도 생의학 분야에 적합한 많은 활성 종들이 발생 되는 것을 확인하였다. 일반적으로 의학 분야에 사용되는 플라즈마의 경우 플라즈마에서 발생하는 열에 의한 피해를 최소화 하는 것이 중요하다. 마이크로웨이브 플라즈마의 경우, 그 플라즈마의 온도가 50$50^{\circ}$C 미만으로 의학 분야에 사용하기 적합하다. 또한 구동 주파수가 올라갈수록 플라즈마를 유지하는데 필요한 전압이 상대적으로 낮아지게 되는데, 이는 전기적 쇼크 등 플라즈마 의용에서 발생하는 안전성 문제에 있어서도 마이크로 웨이브 장비가 좋은 점이다. 본 플라즈마 장비를 구동하기 위한 손바닥 크기 정도의 소형의 전용 파워 장치를 개발함으로써 저전력 소형 플라즈마 장치를 개발하는 것을 목표로 하고 있다. 마이크로 웨이브 장비는 여러 가지 분야에서 그 효과를 검증 받았다. 혈액 응고 실험에서 30초 정도의 짧은 처리만으로도 자연 응고에 비해 탁월한 지혈 효과를 보여줬다 (그림 2). 충치를 발생시키는 대표적인 구강균인 S.mutans의 살균 실험에서 Ti02와의 복합적인 처리를 통해 30초 미만의 처리로 처리하지 않은 것에 비해 10-6 만큼의 줄어드는 살균 효과를 보여줬다. 뿐만 아니라 치아의 미백에 있어서도 탁월한 효과를 나타냈다. 현재 본연구실에서는 마이크로 웨이브 장비의 기본적인 구조를 응용하여, 좀더 넓은 영역을 처리할 수 있는 대면적 마이크로 웨이브 장비를 위한 연구를 수행 중이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.119-120
• /
• 2011

Kawazoe는 1997년 p-type TOS를 만들기 위해서는 3가지가 충족되어야 한다고 언급한바 있다. 첫 번째, 가시광영역에서 투명하기 위해서 cation의 d10s0이 가득 차야 한다. 가득 차지 않은 d10 shell은 광 흡수가 가능하여 투과도를 떨어뜨린다. N-type을 예로 들어 ZnO, TiO, In2O3가 각각 Zn2+, Ti4+, In3+가 되어 d shell을 가득 차게 만드는 것을 볼 수 있다. 두 번째, cation d10s0 shell은 산소의 2p shell과 overlap 되어야 한다. 이 valence band는 홀 전도를 더욱 좋게 한다. 예를 들어 Cu1+(3d), Ag1+(4d)가 해당한다. 세 번째로, 양이온과 산소간의 공유결합을 강하게 하기 위해서 결정학적 구조는 매우 중요하다. Delafossite 구조는 산소가 pseudo-tetrahedral 구조로서 공유결합에 유리하다. 이러한 환경은 O2- (2p6)을 형성하고 홀의 이동도를 증가시킨다. 예를 들어 Cu2O의 경우 앞의 2가지를 만족시키지만 광학적 특성에서 좋지 않다. 그 이유가 3번째 언급한 결정학적인 요인에 있다. 결정 계의 환경은 Cu2O를 따라가면서 3차원적인 연결을 2차원적으로 변형된 delafossite 구조에서는 quantum well이 형성되어 band gap이 커진다. 본 연구에서는 전기적 이방성을 가지고 있는 delafossite CuCrO2 상에서 우선배향을 일으키는 인자 중 기판을 변화시켜 실험을 진행하였다. 결과적으로 기판변화를 통해 우선배향조절이 가능하였으며 CuCrO2 박막을 시켰으며, 결정방향에 따른 전기적 물성의 이방성에 관한 연구는 계속 진행 중에 있다. c-plane sapphire 기판위에는 [00l]로 성장하는 반면, c-plane STO 기판 위에는 [015] 방향으로 성장하는 것을 확인하였다. 이러한 원인은 기판과 증착되는 박막간의 mismatch를 최소화 하여 strain을 줄이고, 계면에서의 Broken boning 수를 줄여 계면에너지를 낮추는 방법이기 때문일 것으로 예상된다. C-plane sapphire 기판위에 증착될 경우 증착온도가 증가함에 따라 c-축으로의 성장이 온전해지며 이에 따라 캐리어농도의 감소와 모빌리티의 증가가 급격하게 변하는 것을 확인할 수 있다. 반면 c-plane STO 기판에서는 증착온도에 따른 박막의 배향변화가 없으며 전기적 물성 변화 또한 비교적 작은 것을 간접적으로 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.757-764
• /
• 2015

Mathematical modeling of focal plane compensation device in the small earth-observation satellite camera has been conducted experimently for compensation of micro-vibration disturbance. The PZT actuators are used as control actuators for compensation device. It is quite difficult to build up mathematical model because of hysteresis characteristic of PZT actuators. Therefore, the compensation device system is assumed as a $2^{nd}$ order linear system and modeled by using MATLAB System Identification Toolbox. It has been found that four linear models of compensation device are needed to meet 10% error in the input frequency range of 0~50Hz. These models describe accurately the dynamics of compensation device in the 4 divided domains of the input frequency range of 0~50Hz, respectively. Micro-vibration disturbance can be compensated by feedback control strategy of switching four models appropriately according to the input frequency.