• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.10
• /
• pp.825-834
• /
• 2000

광학식 동작 포착(optical motion capture)시스템에서 신뢰할만한 3차원 좌표의 획득과 마커의 궤적 추적은 매우 중요한 문제이다. 3차원 좌표를 획득하기 이해서는 다중의 카메라로부터 2차원의 데이터 간의 대응관계를 구해야 한다. 본 논문에서는 각 카메라에서의 3차원 마커들 간의 대응관계를 k-partite graph로 모델링하고, 릴렉세이션 알고리즘을 사용하여 고스트가 제거된 신뢰성있는 클릭을 추출한다. 이를 통해 정확하고 안정적인 3차원의 좌표를 생성할 수 있다. 또한 추출된 3차원 마커의 궤적의 추적을 위해 칼만 필터를 사용한 마커의 예측과 데이터 연계 문제의 해결을 위한 전략을 제안하고. 사라진 마커의 궤적을 유지시키기 위해 다이나믹 모델을 사용한 추적 알고리즘을 제시한다.

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.3
• /
• pp.9-15
• /
• 2000

We Propose a sensor fusion technique for motion capture system. In our system, two kinds of sensors are used for mutual assistance. Four magnetic sensors(markers) are attached on the upper arms and the back of the hands for assisting twelve optical sensors which are attached on the arms of a performer. The optical sensor information is not always complete because the optical markers can be hidden due to obstacles. In this case, magnetic sensor information is used to link discontinuous optical sensor information. We use a system identification techniques for modeling the relation between the sensors' signals. Dynamic systems are constructed from input-output data. We determine the best model from the set of candidate models using the canonical system identification techniques. Our approach is using a simple signal processing technique currently. In the future work, we will propose a new method using other signal processing techniques such as Wiener or Kalman filter.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.6
• /
• pp.41-49
• /
• 2009

In this paper, the multi-camera calibration algorithm for optical motion capture system is proposed. This algorithm performs 1st camera calibration using DLT(Direct linear transformation} method and 3-axis calibration frame with 7 optical markers. And 2nd calibration is performed by waving with a wand of known length(so called wand dance} throughout desired calibration volume. In the 1st camera calibration, it is obtained not only camera parameter but also radial lens distortion parameters. These parameters are used initial solution for optimization in the 2nd camera calibration. In the 2nd camera calibration, the optimization is performed. The objective function is to minimize the difference of distance between real markers and reconstructed markers. For verification of the proposed algorithm, re-projection errors are calculated and the distance among markers in the 3-axis frame and in the wand calculated. And then it compares the proposed algorithm with commercial motion capture system. In the 3D reconstruction error of 3-axis frame, average error presents 1.7042mm(commercial system) and 0.8765mm(proposed algorithm). Average error reduces to 51.4 percent in commercial system. In the distance between markers in the wand, the average error shows 1.8897mm in the commercial system and 2.0183mm in the proposed algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.256-259
• /
• 2003

This paper proposes OPTICAL MARKER fer registering process - one of the 3D measurement process : scan registering - merging - measurement. If the registering work is carried out manually, it can be accompanied with much time and many errors. Because the patterned marker make registering process automatic, many firms use it now. But the physical shape of existing markers is the source of the data loss caused by hiding surface, and the marker arrangement is the source of the time loss. The optical marker proposed in this paper has marker generator, organized a large number of binary coded control laser diode, separate from 3D scan object. So, it does not take much time for the marker disposition, and it is not the origin of the data loss, and the binary coded laser information make the auto-registering possible.

• Journal of Korea Game Society
• /
• v.10 no.5
• /
• pp.103-113
• /
• 2010

In this paper, we present a practical method for generating facial animation by using an optical motion capture system. In our setup, we assumed a situation of capturing the body motion and the facial expression simultaneously, which degrades the quality of the captured marker data. To overcome this problem, we provide an integrated framework based on the local coordinate system of each marker for labeling the marker data, hole-filling and removing noises. We justify the method by applying it to generate a short animated film.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.474-478
• /
• 2002

본 논문에서는 광학식 모션 캡쳐를 이용하여 얻은 한국인의 발레 동작에 대한 모션 캡쳐 데이터를 사용하여 다른 모션으로 변형함으로써 새로운 형태의 동작을 생성하거나 원래 데이터의 에러가 생긴 경우에 보정이 쉽게 수정 가능하도록 하였다. 즉, 모션 캡쳐 데이터의 구조는 다양한 포맷들로 되어 있는 스켈레톤 구조로서 관절의 각도나 위치에 대해 변형을 가하기 힘들다. 그러므로 모션 수정에 관련된 기술을 이용하여 선택된 조인트(joint), 엔드이펙터(end effecter), 마커(marker)들을 보여주고, 오일러(Euler Angles), 쿼터니언(Quaternions), 지수 맵(Exponential Map) 보간이 가능하여 실시간에서도 재생 되도록 구현하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.359-366
• /
• 2015

TMJ(TemporoMandibular Joint) is considered as the most important articulation in human body for maintaining the balance. Thus it is one of the main treatment areas in Chiropractic. Instead of Chiropractic treatment, NOSICK, a TMJ balancing device, can be used. As there is no such device to quantify the effect of NOSICK, a system was developed to measure the effect of NOSICK. This system is composed of stereo vision, infrared lights, and infrared through filter, etc. It requires optical markers for the measurement. 8 land markers were selected from the face which will show different displacement as NOSICK is applied. 11 test subjects were measured with the system developed with and without NOSICK applied. Quantifiable displacement of markers before and after applying NOSICK was successfully measured with the system developed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.232-233
• /
• 2001

2차 비선형광학 물질이 높은 응용성을 갖기 위해서는 큰 2차 비선형광학 계수뿐만 아니라 넓은 파장 영역에 걸친 투명성을 가지고 있어야 한다. vinylidene fluoride(VDF)와 trifluoroethylene(TrFE)가 공중합된 f(VDf-TrFE) 공중합체는 이러한 조건을 갖추고 있는 강유전성 물질이다. 우리는 몰비율이 72：28인 P(VDF-TrFE)을 ITO기판위에 casting하고 corona 극화한 뒤, 두 개의 입력 파장(1064nm, 532nm)에 대한 2차 조화파 발생 실험을 실시하고 Herman과 Hayden의 마커무의 식을 이용하여 2차 비선형 광학 계수를 측정하였다. (중략)

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.3
• /
• pp.17-23
• /
• 2002

Motion capture system is widely used nowadays in the entertainment industry like movies, computer games and broadcasting. This system consist of several high resolution and high speed CCD cameras and expensive frame grabbing hardware for image acquisition. KAIST VR laboratory focused on low cost system for a few years and have been developed a LAN based optical motion capture system. But, by using low cost system some problems like occlusion, noise and swapping of markers' trajectory can be occurred. And more labor intensive work is needed for post-processing process. In this thesis, we propose a trajectory rectification algorithm by confidence model of markers attached on actor. Confidence model is based on graph structure and consist of linkage, marker and frame confidence. To reduce the manual work in post-processing, we have to reconstruct the marker graph by maximizing the frame confidence.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.3
• /
• pp.9-16
• /
• 2012

In this paper, we present a new method for reconstructing detailed facial expression from roughly captured data with a small number of markers. Because of the difference in the required capture resolution between the full-body capture and the facial expression capture, they hardly have been performed simultaneously. However, for generating natural animation, a simultaneous capture for body and face is essential. For this purpose, we provide a method for capturing the detailed facial expression only with a small number of markers. Our basic idea is to build a database for the facial expressions and apply the principal component analysis for reducing the dimensionality. The dimensionality reduction enables us to estimate the full data from a part of the data. We justify our method by applying it to dynamic scenes to show the viability of the method.