• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.111-115
• /
• 2005

광 도파관 제작을 위한 마스터를 (100), (110) 실리콘 웨이퍼를 이용하여 제작하였다. DRIE와 화학적 습식 식각을 이용하여 사각형 모양의 부드러운 표면을 가진 마스터를 구현하였다. 식각된 패턴의 거칠기는 광 도파관을 제작할 수 있을 정도로 충분히 작았다. 마스터와 광 도파관의 분리를 용이하게 하기 위하여 마스터에 산화막을 형성하고 PFAS를 도포함으로써 HIBRIMERs 광 도파관을 성공적으로 제작할 수 있었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.146-154
• /
• 2016

Visible light communication using LED is a technique for transmitting digital data using the light of the LED. Recently, high-speed data rate plays an important role. Therefore, many scholars have researched the MIMO-VLC which is able to increase data rate using a lot of LED transmitters. However, it has problems such as light interference and flicker when transmitting different bit. Many researcher have focused on reduce interference. However it is not considered about flicker problem. Flicker is defined unstable brightness. It occurred the tired of human eyes, lowers eyesight and also decreases concentration. In order to solve this flicker problem in MIMO-VLC, we propose the PFM(Parallel Flicker Mitigation) code. PFM code using combinatorial theory can maintain constant brightness the whole bit duration. Therefore, it is possible to assure the brightness by confirm simulation results.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.102-108
• /
• 2010

The photovoltaic system changes solar energy into DC by solar cell and this DC is inverted into AC which is used in general houses by inverter. Recently, the use of power of the photovoltaic system is increased. Therefore, the study of 3 phase solar system to transmit large power is very important. This paper proposes a method that finds simply faults and diagnoses the switch open faults of 3-phase pulse width modulation (PWM) inverter of grid-connected photovoltaic system. The proposed method in $\alpha\beta$ plane uses the patterns of trajectory image as the characteristic parameters and differenciates a normal state and open states of switches. Then, the result is made into tree. The tree is composed of 21 fault patterns and the parameters to classify faults are a shape, a trajectory area, a distributed angle, and a typical vector angle. The result shows that the proposed method diagnosed fault diagnoses, classified correctly them, and made a pattern tree by fault patterns.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.523-532
• /
• 2013

Since conventional methods for the reconstruction of 3D objects used a number of cameras or pictures, they required specific hardwares or they were sensitive to the photography environment with a lot of processing time. In this paper, we propose a 3D object reconstruction method using one photograph based on structured light in ubiquitous environments. We use color pattern of the conventional method for structured light. In this paper, we propose a novel pipeline consisting of various image processing techniques for line pattern extraction and matching, which are very important for the performance of the object reconstruction. And we propose the optimal cost function for the pattern matching. Using our method, it is possible to reconstruct a 3D object with efficient computation and easy setting in ubiquitous or mobile environments, for example, a smartphone with a subminiature projector like Galaxy Beam.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.155-161
• /
• 2002

The nail bed is located under the finger nail. The arched portions of the nail bed, which contain a large number of capillary loops, are separated by the valley of the nail bed. The valley of the nail bed does not contain capillary loops. Light is scattered when it propagates through the dermis of skin, and human blood strongly absorbs the light with proper wavelength. By use of the optical properties of the nail bed, we propose an optical technique which extracts the nail bed image of the finger nail. After achieving nail bed images of each individual, we correlated between them. The correlation outputs show that we can identify individuals by comparing the peak heights of the correlation outputs.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.76-82
• /
• 1998

As the minimum feature size of a semiconductor chip gets smaller, the inevitable distortion of patterned image by optical lithography becomes the limiting factor in the mass production of VLSI. The optical proximity correction (OPC), which corrects pattern distortion that originates from the resolution limit of optical lithography, is becoming indispensable technology. In this paper, we describe a program that corrects optical proximity effect and thus finds the optimum mask pattern with a Monte-Carlo method. The program was applied to real memory cell patterns to produce mask patterns that generate image patterns closer to object images than original mask patterns, and increase of process margin is expected, as well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.6
• /
• pp.545-555
• /
• 1991

In this paper, We discuss optical implementation of new optical adaptive patern recognition system based on single layer perception with learning capability and associative memory model having error corrective capability. The single layer perceptron is optically implemented by using 2 D LCTV spatial light modulators through the nonlinear quantization and polarization encoding methods, and 2 D hopfield associative memory is also implemented by using multifocus holographic lens. From some experimental results on classfication of Arabic numbers into even & edd numbers, it is shown that the proposed system can classify the patterns to the right classes correctly even for the partial and erronenous input patterns. Accordingly, the proposed optical adaptive pattern recognition system can be suggested for practical application in the fields of image processing and pattern recognition.

• Korea Trade Review
• /
• v.41 no.2
• /
• pp.185-202
• /
• 2016

Interests in renewable energy have been increasing with low-carbon policy and concerns about radioactivity. And solar energy is receiving attention as the most realistic energy in the industry. Demand for solar energy was started in Germany and European countries, and further expanding to other countries. And Korea became one of the high technology level countries in that industry. So, systematic analysis is needed for trading fact and overseas expansion of Korea's photovoltaic energy together with increased demand in the world. In this paper, we analyzed panel data for 25 years, from 1990 to 2014 from 11 countries that have track record with Korea's PV product. It is conducted based on Gravity model and matched with general report for Korean PV industry. But it shows different result for other factors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1048-1058
• /
• 1999

This paper compares some architectures to achieve the optimized WDM architecture for all optical transport network, the comparison is presented in terms of the number of required wavelength and LT. These architecture types are PPWDM, SHWDM, DHWDM and fully optical WDM. Topology is a static ring network where the routing pattern is fixed and traffic pattern has uniform demand. This paper also proposes an algorithm for the wavelength assignment for a folly optical WDM ring network which has full mesh traffic pattern. The algorithm is based on heuristic algorithm which assigns traffic connections according to their respective shortest path. Traffic described here that is to be passed through can be routed directly within the optical layer instead of having the higher layer to handle it.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.414-414
• /
• 2014

박막 태양전지의 광흡수를 증가시키기 위한 방법으로 나노 사이즈의 구조체를 이용하는 방법들이 주목받고 있다. 나노 구조체로 인한 광 산란 효과는 광 흡수층에서 빛의 흡수를 높여 태양전지의 변환효율을 높일 수 있다. 3차원 구조체를 제작하는 기존의 방법들은 대면적 기판에 적용이 어렵고, 비용적 측면 등의 문제점들이 있다. 본 연구에서는 대면적화가 가능한 나노 임프린트 리소그래피 방법을 이용하여 Ag nano rod 패턴을 제작하였다. 임프린트 공정 중 UV 조사시간, 가해지는 하중, 기판온도 등의 변수들과, 건식 이온 식각 시 변수들을 조절하여 최적화된 3차원 rod 패턴을 형성할 수 있었다. 그림 1은 형성된 Ag rod 패턴의 SEM 측정 사진이다. 전극 폭 300 nm, 간격 300 nm로 제조된 rod는 Ag의 두께를 조절함으로써 전기, 광학적 특성을 조절할 수 있었다. 3차원 Ag nano rod를 박막 태양전지의 전, 후면 전극으로 사용하여 태양전지의 특성변화를 분석하였다.