• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2828-2833
• /
• 1997

In this paepr, we have proposed an enhanced TDM with WDM hybrid photonic switching architecture, which has much simpler configuration and requires less hard ware. the basic module consists of arrayed waveguide grating (AWG) for wavelength division, compressor and fiber delay lines for time division. When compared with other systems, we proved that the proposed switch is suitable for large capacity photonic switching system due to less complexity and lower cost in implementation than the previous ones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.89-93
• /
• 2002

PbO contained multicomponent glass and fibers have been obtained by melting process and double crucible method. PbO containing glass is most promising for fabrication of high-numerical aperture optical fiber. In this study, main composition is $SiO_2$, PbO and glass composition mix component oxide such as $K_2O$, $Na_2O$, $B_2O_3$, $A1_2O_3$. Also, the optical, mechanical and structural properties of manufactured fibers by double crucible method are investigated.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.220-221
• /
• 2000

가공용 레이저로는 $CO_2$, 루비, Nd:YAG, 아르곤 이온 레이저 등이 이용되고 있으며, 이중 펄스형 Nd:YAG 레이저는 $CO_2$ 레이저와 함께 레이저 가공에 널리 사용되는 고체 레이저로서 마킹(making), 트리밍(trimming), 리페어링(repairing) 등의 정밀 가공 분야에서 많은 실용화가 이루어져 왔다.$^{(1)}$ $CO_2$ 레이저의 경우 매질가스로 $CO_2$, $N_2$, He 등을 사용해야하므로 취급 및 유지보수가 불편하지만, 열전도율이 높고, 기계적 광학적으로 안정된 Nd:YAG 레이저는 램프에 의한 광 여기 방식이므로 유지보수가 쉽다. 또한 광 출력의 제어가 용이하며, 광파이버에 의한 빔 전송이 가능하여 산업기술 및 의료 분야에서의 적용이 더욱 더 확대되고 있다.$^{(2)}$ (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.290-291
• /
• 2002

스틸 판재 4KW CO2 레이저 용접시 발생되는 플라즈마 특성 연구를 위하여 용접 품질에 중요한 요인이 되는 용접속도, 주입가스 양, 판재사이의 갭을 변화시키면서 실험을 하였다 발생된 분광학적 스펙트럼을 측정하였고 플라즈마광의 세기를 광파이버를 이용하여 측정하였다 플라즈마 패턴 특성을 알기 위하여 1000 frame/sec의 고속 디지털 카메라를 이용하여 플라즈마 영상을 측정하였다 그 결과, 용접속도가 빠를수록 상단에서 발생되는 플라즈마 광의 세기는 커졌으며, 주입가스의 양이 적을수록 플라즈마광의 세기가 강하게 측정되었다. 또한 판재 사이가 넓을수록 발생된 플라즈마가 판재 사이로 분출이 되면서 그 세기가 감소되는 현상을 보여주었다. 이러한 결과는 2차원 플라즈마 영상실험의 결과와 일치함을 보여주었다. 따라서 표면에서 발생되는 플라즈마 광의 세기는 레이저 용접시 중요한 요인이 되는 침투깊이를 추정하는데 중요한 정보가 되며 레이저 용접 품질에 대한 실시간 모니퍼링이 가능함을 확인하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.119-125
• /
• 1990

This paper describes fiber optic voltage sensor using EOM-BSO (Electro-Optic Modulator-Bismuth Silicon Oxcide). Transceiver has an electical/optical converter and an optical/electrical converter which consist of light emitting diode, PIN-PD, and electronic circuits. Multimode fiber cable of $100/140{\mu}m$ core/clad diameter is used for connecting the transceiver to fiber cable and fiber optic voltage sensor. Before our experiments, by applying the Maxwell equations and wave equations, We derive matrix equation on wave propagation in the BSO single crystal. And also we derive optimal equation on intensity modulation arising through an analyzer. According to experi-mental results, fiber optic voltage sensor has maximum $2.5{\%}$ error within the applied AC voltage of 800V. As the applied voltage increases, saturation values of voltage sensor also increase. This phenomenon is caused by optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optic voltage sensor in the temperature range from$-20^{\circ}C\to\60^{\circ}C$ are measured within ${\pm}0.6{\%}$. And frequency characteristics of the voltage sensor has good frequency characteristics from DC to 100kHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.92-97
• /
• 2008

This is a research to apply 1310nm single-mode optical fiber to a temperature sensor. The existing study of optical fiber sensor is complicated because it was made with various equipment. To vary scattering, the variation of optical frequency is measured by using Bragg(lattice) or pulse generator and also bulk system is created by YAG laser but there were some difficulties creating experimental environment and it was a problem that the stability of measured data was low. The temperature sensor system using the suggested sBs(stimulated Brillouin scattering:sBs) from this research is much more simplified straight-line system. To improve the trust and accuracy of noises from optical frequency and unclear results, it was analysed by using Neuro-Fuzzy algorithm. we tried to get more correct data than existing system. sBs measure that optical frequency changed due to the variation of temperature. The analyzed change rate of outcome by Fuzzy theory is 1.1 MHz.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1844-1846
• /
• 2001

광섬유는 저손실, 광대역의 전송특성을 가지며 세경(細徑), 경량등 많은 장점을 가지고 있지만 동케이블과 같이 파단점, 불연속점등의 장해점 탐색에 대한 어려움이 있다. 이러한 문제점을 해결하기 위하여 OTDR(Optical Time Domain Reflectometer)은 고감도, 고정도의 광센싱 기술, 극초단 광펄스 레이다 기술, 광다중화 센서 네트웍기술, 실시간 광신호처리 기술 등 정밀 광계측 및 신호처리기술을 적용하여 설치된 광섬유의 손실 정도를 측정하는 시스템으로 광섬유에 입사된 광의 산란 가운데 Rayleigh 산란에 의해서 생기는 후방산란광을 관측하여 광파이버의 파단점 탐색 및 손실측정이 가능하다. 최근 대부분의 유선통신망은 광섬유를 이용한 광통신방식으로 이루어지고 있으며 이러한 광섬유의 고장점을 찾기 위한 방법은 OTDR방식이 유일하다고 할 수 있다. 본 논문은 Rayleigh 후방산란에 의한 광학적 특성을 규명하고 이러한 특성을 이용하여 이용한 광섬유 유지보수용 계측시스템을 설계, 제작하고 실험한 결과에 대하여 설명하고 고찰하였다. 측정거리를 40Km까지 측정하도록 하였으며, 모니터상에서의 거리 분해능은 5m정도를 가지며 1310nm의 파장을 사용하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.146-156
• /
• 1995

Growing international concern about environmental issues in recent years has led to new proposals for strengthening exhaust emission standards and fuel economy requirements throughout the world. The low emission vehicle(LEV) standards drawn up by the California Air Resources Board(CARB) in the U.S.A are noticeably stringent To cope with this regulation, a reduction of HC emission is the most important challenge for the automotive industry because HC emission levels are severer than any other components emission levels. In this paper, the apparatus for visulalizing the wall film flow in a intake manifold and the spark plug with optical fiber for detecting the signal from diffusion flame are developed to mal,e the HC formation mechanism clear. High speed camera system is also used to elucidate the correlation wall film flow and the diffusion flame. Using these methods, the effect of fuel injection systems such as injection direction, spray angle, atomised injection on HC emission levels is investigated. Consequently, the optimal fuel injection conditions for minimizing the wall film flow and reducing the HC emission are found through this research.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.61-64
• /
• 2007

V-groove device was fabricated for precision coupling of planar optical splitter and optical fibers. V-groove was made through select wet etching of Si wafer by using KOH solution. Etching rate and surface roughness were checked, changing KOH composition(10, 20, 30, 33, 40 wt.%) and etching temperature (50, 60, 70, $80^{\circ}C$) to fabricate V-groove device effectively. Etching rate was the fastest as $1.84\;{\mu}m/min$ in case of etching by 20 wt.% KOH on $80^{\circ}C$, surface roughness was the best in case of etching by 33 wt. % KOH on $80^{\circ}C$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.4
• /
• pp.1-6
• /
• 2001

In this paper, it is analysed the spectrum of optical fiber output through the sunlight collector system. As the result of the analysis, the sunlight collector system's UV distribution is lower then the sunlight'UV distribution. Also, the lighting environments under the optical fiber bundles are predicted when applied to the minimum workroom's(6${\times}$6${\times}$2.3[m]) interior lighting by using a lighting design program. In case of optical filer output\`s hight of 1.3[m], the illuminance value over 500[lx] in the area 50${\times}$50[cm] was achieved. As the result its feasibility as an interior lighting source shows no serious problem except the system cost.