Park, Yeon-Hyeon;Lee, Geon-Hwan;Lee, Seong-Hun;Yun, Jeong-Heum
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.469-469
/
2013
Flexible display는 미래의 평판디스플레이 시장으로 꼽히고 있는 대표적인 분야이다. PET, PEN, PI 등의 polymer substrate는 접거나 구부리는 형태로 변형이 가능하기 때문에 차세대 기술로 평가되어지는 Flexible display, Solar cell, OLED 등 다방면에 응용이 가능하다. 또한 ITO는 지금까지 개발된 재료 중에서 가장 투명하고 전기가 잘 통하며, 생산성도 좋기 때문에 이것을 투명전극의 재료로 사용한다. 디스플레이에 사용되는 투명 전도막의 경우, 가시광 영역에서의 투과 및 반사와 같은 광학적 특성은 중요한 요소 중의 하나이다. 투명 전도막의 광흡수, 반사 및 투과즉성은 박막 내에 존재하는 전공밴드의 전자, 자유전자, polar optical phonon 등의 빛과의 반응에 의해 결정된다고 알려져 있다. 본 연구에서는 저온 증착된 ITO 박막의 광학적 특성을 향상시킬 수 있는 방법을 모색하고 기계적, 화학적 특성을 분석하였다.
고주파 마그네트론 스퍼터링(RF magnetron sputtering)법을 이용하여 자동차유리 성에 제거용 주석첨가 인듐산화물(indium tin oxide;ITO) 투명저항박막의 증착과 그 전기 및 광학 특성을 연구하였다. 기판온도는 A, T.-30$0^{\circ}C$, O2/(Ar+O2)비는 0-0.3로 변화시키며 실험하였다. 기판온도가 높아질수록, 그리고 O2/(Ar+O2)비가 높아질수록 박막의 증착속도는 감소하였다. 또한, 기판온도가 높아질수록 In2O3(400) 방향의 결정성은 감소하고, In2O3(222)와 (400) 피크만이 잔존하였다. 기판온도가 높아질수록 가시광영역의 광투과도는 향상되었고, 면저항은 20$0^{\circ}C$까지는 감소하였으나 20$0^{\circ}C$이상에서는 거의 일정하였으며, 결정립 크기는 온도가 높아질수록 증가하였다. 박막의 면저항은 O2/(Ar+O2)비가 0.1에서는 감소하고, 그 이상에서는 증가하였으며, 광투과도는 O2/(Ar+O2)비에 거의 영향을 받지 않았다.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.351-352
/
2012
UV LED에서 p-GaN층의 높은 일함수와 자체 면저항이 크기 때문에 current spreading layer인 ITO (indium tin oxide) 투명전극이 사용되고 있다. 따라서 높은 UV 파장대 투과율과 낮은 면 저항이 매우 중요하다. 본 연구에서, RF magnetron sputter를 사용하여 ITO 투명전극을 glass(boro33)에 120 nm 두께로 증착하였다. 그 후 RTA (rapid thermal annealing)을 이용해 120초 동안 $600^{\circ}C$에서 Air, $N_2$ (15 sccm), vacuum 환경에서 열처리를 하여 UV-Vis-NIR spectrophotometer를 사용해 ITO 박막의 투과율을 측정하고, Hall measurement system을 이용하여 전기적 특성을 측정하였다. Fig. 1과 같이 열처리 환경에 따라 ITO 박막의 투과율이 변하고 또한 Table 1과 같이 전기적 특성도 변함을 알 수 있었다. Air 환경에서의 열처리는 reference 샘플과 비교 했을 때 400 nm 이하의 파장에서 투과율이 증가하였지만 400 nm 이상의 파장에서는 투과율이 낮아짐을 볼 수 있고, 면 저항 (Ohm/sq)은 오히려 reference (as deposited) 샘플과 비교하여 24 Ohm/sq 증가하는 것을 알 수 있었다. 반면에 $N_2$, vacuum 환경에서 열처리는 reference (as deposited) 샘플 보다 380 nm 파장대에서 16% 정도 높은 투과율을 보였고, 면저항 역시 2배 이상 낮아졌다. 둘 다 비슷한 투과율과 면저항을 나타내었지만 vacuum 환경이 좀 더 우수한 광학적 특성을 나타내었고 반면에 $N_2$ 환경은 좀 더 낮은 면저항을 나타내었다. ITO 박막을 증착한 후 vacuum 환경에서 열처리를 통하여 제작된 UV-LED (중심 파장 380 nm)가 Fig. 2와 같이 입력 전류 450 mA에서 광출력이 46% 정도 향상 되었고 안정된 I-V 특성 보였다.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.295-295
/
2014
일반적으로 박막 태양전지의 효율은 박막 종류에 따른 광 흡수율에 의해 결정되며, 이는 증착한 박막의 두께에 의해 결정된다. 증착한 박막의 두께가 두꺼워질수록 광 흡수율은 증가하지만, 박막 두께가 지나치게 두꺼워지면 열화 현상으로 인한 모듈의 효율 감소가 생기므로 적절한 박막의 두께가 요구된다. 특히 a-Si:H의 경우 가시광 영역에서 높은 흡수계수를 가지고 있어서 얇은 박막 두께로도 태양전지의 제작이 가능하지만, 동일한 박막 두께에서 효율을 더욱 향상시키기 위한 다양한 광 포획 기술에 대한 연구가 많이 진행 되고 있다. 본 연구에서는 자외선을 이용한 nano-imprint lithography 기술을 이용하여 a-Si:H 태양전지의 유리기판 위에 pattern을 삽입하여 광 산란 효과를 향상 시키고자 하였다. 또한 유리기판의 굴절률 (n=1.5)과 투명전극의 굴절률 (n=1.9)의 중간 값을 갖는 ZnO nanoparticles (n=1.7)이 분산 된 imprinting resin을 사용함으로써 점진적으로 굴절률을 변화시켜, 최종적으로 a-Si:H 층까지의 광 투과율을 높이고자 하였다. 제작한 기판의 종류는 다음과 같다. 첫 번째 기판으로는 유리기판 위에 ZnO nanoparticles이 분산 된 imprinting resin을 spin-coating 하여 점진적인 굴절률의 변화에 의한 투과도 향상을 확인하고자 하였다. 두 번째 기판으로는 규칙적인 배열을 갖는 micro 크기의 패턴을 형성하였다. 마지막으로는 불규칙한 배열을 갖는 nano 크기와 micro 크기가 혼재 된 패턴을 형성하여 투과도 향상과 동시에 빛의 산란을 증가시키고자 하였다. 후에 이 세가지 종류를 기판으로 사용하여 a-Si:H 기반의 박막 태양전지를 제작하였다. 먼저 제작한 박막 태양전지용 기판의 광학적 전기적 특성을 분석하였다. 유리 기판 위에 형성한 패턴에 의한 roughness 변화를 확인하기 위해 atomic force microscopy (AFM)를 이용하여 시편의 표면을 측정하였다. 또한 제작한 유리 기판 위에 투명 전극층을 형성 후, 이로 인한 전기적 특성의 변화를 확인하기 위해 hall measurement system을 이용하여 sheet resistance, carrier mobility, carrier concentration 등의 특성을 측정하였다. 또한, UV-visible photospectrometer 장비를 이용하여 각 공정마다 시편의 광학적 특성(투과도, 반사도, 산란도, 흡수도 등)을 측정하였고, 최종적으로 제작한 박막 태양전지의 I-V 특성과 외부양자효율을 측정하여 태양전지의 효율 변화를 확인하였다. 그 결과 일반적인 유리에 기판에 제작된 a-Si:H 기반의 박막 태양전지에 비해, ZnO nanoparticles이 분산 된 imprinting resin을 spin-coating 하여 점진적인 굴절률 변화를 준 것만으로도 약 12%의 태양전지 효율이 증가하였다. 또한, micro 크기의 패턴과 nano-micro 크기가 혼재된 패턴을 형성한 경우 일반적인 유리를 사용한 경우에 비해 각각 27%, 36%까지 효율이 증가함을 확인하였다.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.49-49
/
2011
실리콘 태양전지에 사용되는 ZnO 박막의 특성은 적외선과 가시광선 영역에서 높은 투과도 (>80%)와 낮은 비저항(<10-2) 외에 산란(scattering)에 의한 빛의 광학적 경로(optical path) 증가로 활성층(active layer)에서의 광 흡수도 증가 및 입사광의 재반사를 방지할 수 있는 표면 형상(morphology)의 제어가 중요하다. 일반적으로 우선 배향성(preferred orientation)이 <0002>방향으로 texturing된 ZnO박막보다 <1120>방향으로 texturing된 박막이 더 우수한 광 산란 효과를 보인다. 따라서, 이 논문에서는 유기화학증착공정으로 증착한 ZnO 박막의 texture 형성에 있어 박막 증착 온도 및 원료로 사용하는 DEZ(Diethylzinc)와 H2O의 상대농도 변화에 따른 texture 방향의 변화에 대해 고찰하였다. 반응기내의 압력을 0.67 torr로고정하고 기판온도를 $90^{\circ}C$에서 $170^{\circ}C$까지 $20^{\circ}C$간격으로 증가시키고, $120^{\circ}C$에서 H2O/DEZ의 비를 0.1에서 4까지 변화시켰다. 기판온도가 증가함에 따라 ZnO박막의 texture 방향은 <0002>에서 <1120> 방향으로 변화하였다. 또한 $120^{\circ}C$에서 H2O/DEZ 비가 증가함에 따라 ZnO 박막의 texture 방향은 <0002>에서 <1120> 방향으로 변화하였다. 이에 따른 광투과, 광산란 특성과 전기적 특성의 변화를 조사하였다.
Proceedings of the Korean Information Science Society Conference
/
2001.10b
/
pp.538-540
/
2001
현재 사용하는 LCD(Liquid Crystal Display) 장치는 비발광형 LCD장치를 사용하므로 외부광원이 필요하다. 투과형 LCD의 경우는 Panel의 뒷면이나 측면에 전용광원(Backlight unit)을 사용하여 빛을 투과시킴으로서 발광할 수 있도록 하는 방법을 사용한다. 현재는 이러한 투과명을 사용하는 것이 일반화되는 추세로 광원을 LCD전면으로 효율적으로 반사하는 Panel의 뒷면을 설계하는 다양한 방법이 개발되고 있다. 본 논문에서는 최적화된 설계를 위한 모델링 도구(Modeling Tool)와 주어진 광원으로부터 LCD 전면으로 출력되는 광량의 분포를 예측하는 시뮬레이터(Simulator)를 제안한다.
Proceedings of the Optical Society of Korea Conference
/
2003.02a
/
pp.118-119
/
2003
휴대용 통신기기의 발달로 인해 실내 및 실외 환경에서 높은 성능을 발휘하는 LCD 소자가 요구되고 있다. 후면광원을 사용하는 투과형 LCD는 실내 혹은 어두운 곳에서 높은 휘도와 명암대비비를 가지는 반면 실외나 밝은 곳에서는 높은 휘도 및 명암대비비를 보일 수 없다. 그에 반해 반사형 LCD는 주변광을 광원으로 사용하므로 실외 혹은 밝은 곳에서의 전기광학 특성이 양호한 장점이 있지만 실내 및 어두운 곳에서의 사용이 제한된다. (중략)
In this study, we developed an optical-fiber sensor using cobalt chloride solution to monitor temperature in real-time between long distance points unaffected by the electro-magnetic wave and the vibration. Cobalt chloride solutions were made using 10% water and 90% ethanol (v/v) solution. The transmittance of these solutions was analyzed on 655 nm using UV-Visible spectrometer regarding temperature change. Also 30.8 mM cobalt chloride solution was gelled by dissolving polyvinyl butyral and the transmittance of this was analyzed on 655 nm regarding temperature change. The results of transmittance and optical power measurement showed decrease of both transmittance and optical power with increase of temperature from 66.8% and 149.5 nW at $25^{\circ}C$ to 7.1% and 48 nW at $70^{\circ}C$, respectively. These results support the possibility of gelled cobalt chloride/polyvinyl butyral as an optical-fiber sensor to monitor temperature change.
Journal of the Institute of Electronics and Information Engineers
/
v.51
no.6
/
pp.71-77
/
2014
In this paper, we investigated the effects of high-energy electron beam irradiation (HEEBI) on the optical transmittance of InGaZnO (IGZO) films grown on transparent Corning glass substrates, with a radio frequency magnetron sputtering technique. The IGZO thin films deposited at low temperature were treated with HEEBI in air at room temperature (RT) with an electron beam energy of 0.8 MeV and doses of $1{\times}10^{14}-1{\times}10^{16}electrons/cm^2$. The optical transmittance of the IGZO films was measured using an ultraviolet visible near-infrared spectrophotometer (UVVIS). The detailed estimation process for separating the transmittance of HEEBI-treated IGZO films from the total transmittance of IGZO films on transparent substrates treated with HEEBI is given in this paper. Based on the experimental results, we concluded that HEEBI with an appropriate dose of $10^{14}electrons/cm^2$ causes a maximum increase in the transparency of IGZO thin films. We also concluded that HEEBI treatment with an appropriate dose shifted the optical band gap ($E_g$) toward the lower energy region from 3.38 to 3.31 eV. This $E_g$ shift suggested that HEEBI in air at RT with an appropriate dose acts like a thermal annealing treatment in vacuum at high temperature.
This study was conducted to investigate the physical and optical properties of polypropylene and polyester thermal curtains, in which tensile strength, heat reservance and light transmission of two different materials were measured. The results from this study are as follows. 1. The tensile weight of different materials were ranged from 3.4kg to 13.4kg, according to the thickness of materials, but that no difference in the tensile strength was appeared between the two materials. The Elongation of polypropylene materials and the tensile weight and strength of polyester materials were greater than any other materials. 2. The light transmittances of two materials were ranged from 50.3% to 81.7 %, light transmittances in polypropylene were higher by 20-30%,than those in polyester. 3. The heat reservances of two materials were ranged from 18.2% to 41.2%, in which polypropylene showed better performance than polyester. 4. From the results of the test, the polypropylene thermal material was better in elongation, heat reservances and light transmittances, but polyester thermal material was better in tensile strength and light isolation than the other material.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.