• Transactions of the KSME C: Technology and Education
• /
• v.5 no.2
• /
• pp.127-134
• /
• 2017

The reactor internals shall be secured in safety and structural integrity under various vibrational loading conditions. Thus, U.S. NRC, Regulatory Guide 1.20 requires the evaluation for the reactor internals due to acoustic induced vibration including the response to the reactor coolant pump pressure pulsation. This paper suggests a methodology to develop an analytical model of the core support barrel accounting for the fluid around the structure and to analyze the responses to the pump pulsation loads using acoustic structure interaction analysis. The analysis results were compared with those of US Palo Verde 1 CVAP and showed a good agreement. Thus, it is expected that the suggested methodology could be an efficient way to evaluate the response of the core support barrel to the pump pulsation loads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.721-725
• /
• 2007

A fiber optic based weight sensor has fabricated using a fiber Bragg grating with a weight sensitive. The sensing concept exploits the inherent characteristics of the FBG and is based on the strain effect induced in the fiber Bragg grating through. A direct indication of the weight level is given by the shift of the Bragg wavelength caused by the expansion of the sensing material. A FBG behaves like a spectral filter which has inherent characteristics that render it very sensitive to strain and temperature. The sensing principle is also based on the strain effect induced in the FBG through the caused by the weight. The experimental setup used for the initial investigation to characterize the mass response of the sensor. The transmitted signal from the sensor was monitored using an optical spectrum analyzer with a resolution bandwidth of 0.4nm. In this paper, we presented the spectral characterization and shaping of FBG by scanning a mass element that affects a small grating fraction at a time, without permanent effects on the optical fiber when the various wavelength and strain is removed. That is, destruction when the optical fiber for weight is physically damaged.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.521-531
• /
• 2011

This paper presents the variable perturbation and observation(VPO) maximum power point tracking(MPPT) control of the photovoltaic(PV) system considering the shadow influence. The output characteristics of the solar cell is a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. MPPT control is a very important technique in order to increase an output and efficiency of the solar power generation. Conventional perturbation and observation(PO) and incremental conductance(IC) are the method finding MPP by the continued self-excitation vibration. The MPPT control is unable to be performed by rapid output change affected by the shadow. To solve this problem, this paper proposes the VPO MPPT algorithm which changes step size according to output variation. The response characteristics of VPO MPPT algorithm proposed in this paper compares with response characteristics of conventional MPPT algorithm about the radiation, temperature and shadow influence. The validity of the algorithm proposed in this paper prove through the results of the comparisons.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.19-25
• /
• 2009

New polyelectrolytes derived from ionene-containing photocurable reactive oligomer (PIDM) were prepared for water-resistant humidity-sensitive membranes. The mixture of PIDM, hexamethylene dimethacrylate (HDM), pentaerythritol triacrylate dimer (SP1013), and photoinitiator was simultaneously coated on the sensor electrode with photoinitiated radical polymerization. The pretreatment of the substrates with vinyl-type silane-coupling reagent was performed for improving the water durability and stability of the sensors at high temperature and humidity. When the resistance dependences on the relative humidity of the crosslinked PIDMs were measured, it was found that the resistance varied three orders of magnitude between 20 and 90%RH, which was required for the humidity sensor operating at ambient humidity. Their hysteresis, temperature dependence, response time, water durability, and high temperature/humidity stabilities were measured and evaluated as a humidity-sensing membrane.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.426-426
• /
• 2010

유기발광소자는 고휘도, 광시야각, 저생산비용 및 빠른 응답속도의 장점을 갖고 디스플레이 소자와 조명 광원의 응용에 대하여 연구가 많이 진행되었다. 고효율과 색안정성을 가진 유기발광소자를 제작하기 위하여 소자의 다양한 구조에 대한 연구가 활발히 진행되고 있다. 유기발광소자의 발광효율을 향상시키기 위해서는 정공의 수송이나 주입을 감소, 또는 전자의 수송이나 주입을 향상시켜 전자와 정공의 균형을 조절하는 방법이 많이 제안되었다. 본 연구에서는 전자수송층으로 사용되는 tris(8-hydroxyquinolate)aluminum ($Alq_3$) 보다 전자의 수송을 향상시킬 수 있으며 발광층에서 전자 수송층으로 빠져나가는 정공을 막는 정공장벽층의 역할을 하여 정공의 손실을 감소시킬 수 있는 7-diphenyl-1,10-phenanthroline (BPhen)과 $Alq_3$를 혼합하여 혼합 전자 수송층을 사용하였으며, 이를 사용하여 제작된 소자에 대하여 전기적 성질과 광학적 성질의 변화를 조사하였다. 혼합 전자 수송층을 삽입한 소자는 Alq3만을 전자 수송층으로 사용한 소자에 비해 동일 전압에서 낮은 전류밀도와 높은 구동전압을 보였으나 발광세기와 발광효율은 많이 향상되었다. 혼합 전자 수송층을 사용하여 제작한 소자의 발광세기와 발광효율이 향상된 원인은 발광층으로 주입되는 전자가 증가하였고 전자 수송층 역할을 하는 BPhen 이 낮은 HOMO 에너지준위로 인한 정공의 손실을 작게하므로 전자-정공의 재결합 확률이 증가하였음을 알 수 있다. 전자 주입층 또는 정공주입층만을 삽입한 소자를 제작하여 전류밀도-전압특성을 측정하여 전자 및 정공의 전송특성을 조사하였다. 혼합 전자 수송층을 사용하여 제작된 유기발광소자의 발광효율에 대한 메카니즘을 실험결과를 사용하여 설명하였다.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.4
• /
• pp.1313-1344
• /
• 2018

This study aims at investigating the effects of Government R&D subsidies. We analyse the effects of inputs and behavioral additionality on the output additionality. We also measure the moderate effects of the experiences of benefiting from government R&D on the relationship between inputs and behavioral additionality and the output additionality. We conducted a structured questionnaire on the companies who have participated in promotion program of the Korea Innovation Cluster. 126 responses were collected and alnalysed using the OLS technique. Empirical results show that the relationship between input/behavioral additionality (management, follow-up, cognitive capacity) and output additionality had positive effect. The moderating effects of experiences of R&D subsidy on the relationship between input additionality and output additionality and the relationship between cognitive additionality and the output additionality appear to be statistically significant.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.101-108
• /
• 1993

$TiO_{2}$/Se : Te heterojunction for color sensor has been fabricated by RF reactive sputtering and thermal evaporation methods onto glass substrate. The optimum deposition condition of $TiO_{2}$ films was such that RF power was 120 W, substrate temperature was $100^{\circ}C$, oxygen concentration was 50%, working pressure was 50 mTorr for the $TiO_{2}$ film thickness of $1000{\AA}$. In this case, the optical transmittance of $TiO_{2}$ film at 550 nm-wavelength was 85%, resistivity was $2{\times}10^9{\Omega}{\cdot}cm$, refractive index was 2.3, and optical bandgap was 3.58 eV. The composition ratio of 0 to Ti by AES analysis was 1.7. When $TiO_{2}$ films were annealed at $400^{\circ}C$ for 30 min. in $O_{2}$ ambient, the optical transmittance of $TiO_{2}$ films at the wavelength range of $300{\sim}580$ nm was improved from 0 to 25%. When Se : Te films were annealed at $190^{\circ}C$ for 1 min., photosensitivity under illumination of 1000 lux was 0.75. The optical bandgap of Se : Te films was 1.7 eV. The structures of Se : Te films were the hexagonal with (100) and (110) orientation. The spectral response of a-Se was improved by the addition of Te, especially in the long wavelength region. The $TiO_{2}$/Se : Te heterojunction showed wide spectral response, and more improved one than that of a-Si film in the blue light region.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.356-362
• /
• 2002

The molecular orientational dynamics of the nonlinear optical(NLO) side-chain polymer N-(4-nitrophenyl)-(L)-prolinol-poly (pphenylene terephthalates) have been studied using nonlinear optical responses as measured by second harmonic generation (SHG). A new pulsed corona poling is used to orient the NLO chromophores and the polymer segments into the noncentrosymmetric structure required to obtain the SHG signal. By corona poling of negative high voltage pulses with variable repetition rates (between 0.5 and 10 ㎑) at temperature between 25$^{\circ}C$ and 80$^{\circ}C$, well below and about the glass transition temperature 70$^{\circ}C$, the side-chain chromophores and the polymer chain contour rearrange themselves and create the domain structure observed by atomic force microscopy(AFM). The pulsed corona voltage enhances the orientational ordering of the NLO chromophores and also significantly influences the growth of SHG signal and the improved relaxation behavior after the poling field is removed, reducing the visible damage to the polymer film dramatically. This new pulsed corona poling experiment gave direct in situ evidence that the NLO chromophore and the polymer backbone undergo anisotropic rearrangement during the poling process.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.307-318
• /
• 2002

To provide a guideline for the development of a web-based sport biomechanics class in undergraduate program, thirty web sites, searched via search engines in May 2002, were analyzed intensively. In terms of requirement of log-in, only one site of 30 sites required user name and password. Seventeen(57%) sites provided the lecture note, which had various file formats such as 59% if PDF, 29% of HTML, and 12% of PPT. Fourteen(47%) sites provided the assignment and grade information on web. Eleven(37%) sites provided various resource and links which were related in sports biomechanics. Only four(13%) sites provided discussion or online digitizing or kinematic analysis program. Based on above results, a guideline for the development of a virtual classroom for college level sport biomechanics. A web-based sport biomechanics class should be developed with consideration of several functions as follows; homepage design, lecture note, measurement of class attendance, collaborative research system, and web-based data collection and analysis software for biomechanics laboratory.

• Proceedings of the Korean Association for Survey Research Conference
• /
• 2005.12a
• /
• pp.91-113
• /
• 2005

본 연구는 청년들의 취업 및 실업 경험이 정신건강에 어떠한 영향을 미치는지 종단적으로 알아보는 데 목적이 있다. 구체적으로 대학을 졸업하고 난 이후에 지속적으로 미취업 상태로 남아있는 사람들의 정신건강의 문제 그리고 취업에 성공하는 경험이 정신건강에 미치는 영향을 미치는지 알아보고자 한다. 이를 위해서 국내 대학교 4학년생들을 대상으로 1차 조사를 실시하고 이후 약 6개월 간격으로 2차 조사, 3차 및 4차 조사를 실시하였다. 네 시점에서 모두 응답자들의 취업여부와 정신건강 수준을 측정하였다. 4차 조사까지 모두 응답한 560명 중에서 2차, 3차, 및 4차 시점의 취업여부에 의해서 집단을 다음과 같이 나누었다: 2차, 3차 및 4차 시점 순서대로, 모두 취업 상태인 집단('취업-취업-취업 집단'), 3차 시점에서 취업에 성공한 집단('미취업-취업-취업 집단'), 4차 집단에서 취업에 성공한 집단('미취업-미취업-취업집단') 그리고 모두 미취업 상태인 집단('미취업-미취업-미취업 집단'). 그 결과를 보면, 취업-취업-취업 집단의 경우에는 취업에 성공한 2차 시점에서 정신건강 수준이 상당히 좋아졌다가 3차 및 4차 시점에서 다시 본래 수준으로 돌아가는 경향을 보였다. 미취업-취업-취업 집단의 경우에는 취업에 성공한 3차 시점 이후로, 미취업-미취업-취업 집단의 경우에는 취업에 성공한 4차 시점에서 정신건강 수준이 좋아지는 경향을 보였다. 지속적으로 미취업 상태였던 집단에서는 3차 시점에서 정신건강 수준이 상당히 나빠졌다가 여전히 미취업 상태인 4차 시점에서 오히려 완화되는 경향을 보였다. 본 연구의 시사점과 제한점 및 장래 연구의 과제가 논의되었다.iments and numerical analysis of luminescence efficiency in the hole carrier transport layer's thicknes. 나아갈 것이며, 아울러 향후에도 아직 미흡한 분야인 IT 아웃소싱에서 적정수준의 대가지급 방안 및 바람직한 Relationship 에 영향을 미치는 여러 가지 요인에 대해서도 살펴 봄으로써 IT분야의 Outsourcing을 검토하거나, 추진할 때 도움이 될 수 있도록 하고자 한다.개의 총 297개의 데이터를 추출하여 사용하였다. 실험과는 좌측공격 91.7%, 우측공격 100%, 중앙공격 87.5%, 코너킥 97.4%, 프리킥 75%로서 매우 양호한 인식율을 보였다. 사용경험정도가 가입직후 해지에만 영향을 미치는 요인임을 보여준다. 또한 매체의 정보전달 풍부성 (media richness)이 상대적으로 높은 소매점이나 웹사이트를 통해 서비스에 가입한 소비자일수록 가입 직후뿐만 아니라 서비스사용 이후에도 낮은 해지성향을 나타냈다. 이러한 분석결과를 바탕으로 인터넷전화 서비스에 적합한 고객지원 프로그램 설계와 마케팅 매체선정과 관련한 전략적 시사점을 도출한다. 그리고 국내에서 최근 이슈가 되고 있는 차세대 무선인터넷 서비스인 와이브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼