• Journal of the Korean Vacuum Society
• /
• v.3 no.1
• /
• pp.111-116
• /
• 1994

본 연구는 CdS, CdSe 분말을 불순물, flux와 혼합하여 질소 분위기에서 소결한 후 전자빔으로 증착하여 적절한 조건에서 열처리 하였다, 이 박막의 결정구조를 X-ray 회절 실험을 통하여 조사하고 제작된 CdS1-xSex 발광 소자의 전기적 특성은 Hall 효과 측정을 이용하고 광학적특성은 광발광 및 광전 류 스펙트럼, 감도, 최대 허용소비전력, 응답시간 등을 분서하교, 발광소자로서의 기능을 검토하였다.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.301-304
• /
• 1999

밀리미터파 대역의 아날로그 광전송을 위한 진행파형 (travel ing wave, TW) 전계흡수 광변조기 (electroabsorption modulator, EAM)와 광수신기의 설계에 대해 발표하고자 한다. TW EAM 및 TW 광수신기의 일반적인 형태인 ridge-type의 co-planar waveguide (CPW)구조에서의 마이크로파의 전송특성을 3차원 FDTD로 분석하여 광파와 전파의 속도 정합 등을 이루는 최적화 구조를 설계하였다. TW EAM의 경우 광세기 변조의 비선형 응답특성에 있어서 마이크로파 손실과 소자길이가 RF 신호의 혼변조 왜곡 (intermodulation distortion)과 SFDR (spurious free dynamic range)성능에 미치는 영향도 이론적으로 조사하였다. TW PIN 광수신기의 경우 광파와 마이크로파의 속도정합의 영향과 이전에는 고려되지 않았던 photo-generated 전송자의 진성 영역에서의 transit time이 광수신기의 밴드 폭에 미치는 영향을 분석하여 최적화 설계하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.48-48
• /
• 2004

RUS(공명초음파분광법)는 비파괴 검사법의 하나로서 공명 주파수와 주파수 응답을 매우 정확하게 측정할 수 있으며, 탄성학적인 성질과 이방성을 결정하는데 이용 가능하다. Paul Heyliger와 Hassel Ledbetter는 steel block의 표면 크랙과 복합적층물의 내부 손상을 검출하는데 RUS를 사용하였으며, Jay G. Saxton은 RUS를 이용하여 chops, cracks, voids등을 검출하므로써 RUS의 비파괴 검사기능으로서의 가능성을 찾았다. 현재 광섬유 응용 제품에 많이 이용되고 있는 광커넥터는 초정밀 가공을 필요로 하는 중요한 부품으로서 optical fiber, ball lense로 구성되어진다.(중략)

• Digital Contents
• /
• no.8 s.159
• /
• pp.86-88
• /
• 2006

이 내용은 문화광광부의‘ 2005문화산업통계’를 인용하여 작성한 내용으로 1부와 2부로 나누어 분석했다. 1부에서는 조사대상 213개 애니메이션업체 중 152개업체의 응답 및 조사를 통해 만들어진 자료를 바탕으로 크게 애니메이션업계의 일반현황과 매출액현황으로 구분했다. 일반현황은 설립연도현황, 제작비용내역현황, 지적재산권 등이며 매출액현황은 사업형태별, 지역별, 매출규모별, 종사자규모별, 수입, 수출별등 다양한 관점에서 조사된 통계내용이다. 따라서 제시된 각 항목의 통계를 통해 특징을 분석하고 이를 통해 애니메이션 산업의 발전을 위한 제안을 모색해 보고자 한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.100-101
• /
• 2004

• Polymer Science and Technology
• /
• v.21 no.5
• /
• pp.447-458
• /
• 2010

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.109-113
• /
• 2004

We have manufactured and characterized the fiber-to-Planar Waveguide Coupler for analysis of the photo-induced refractive index change of DM-BTE .(l,2-bis[2,5-dimethylthio-phen-3-yl]-hexafluorocyclopentene) When irradiated with ultraviolet light, the colorless diarylethene(DM-BTE)-crystal turned red while keeping the crystal shape. The red color was bleached by irradiation with visible light(λ＞450 nm). The resonant wavelength was shifted and recovered owing to the refractive index variation of the planar waveguide because of its photo-functional properties on exposure to UV and visible light. The wavelength responses of this switch by UV exposure were measured as 0.057 nm/sec with saturation time of 60 seconds. and when illuminated by visible light, resonance wavelength variations were measured as 0.028 nm/sec, with recovery time of 140 seconds.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.846-851
• /
• 2010

A liquid-air interface sensing system using the flat end surfaces of a fused-silica fiber coupler has been demonstrated. The principle is based on the additional optical loss caused by changing the refractive index of the external material at the boundary of the end face made of a fiber. The immersion characteristics of this system with respect to the different splitting ratios of the couplers were investigated to determine the sensitivity when it responses to water and air. These experimental data are very useful for selecting the coupling ratio of a coupler in order to develop a multiple sensing probe system. In the proposed sensor structure, it can be emphasize that the sensing probe can be appropriately arrayed on the basis of splitting ratio of the coupler. As a result, it is expected that the proposed liquid-air interface sensors can also be applied to monitor flooding that occurs in multiple areas at the same time.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.145-150
• /
• 2023

Non-uniform optical taper waveguides have been widely used as devices for high-efficiency mode coupling, as they are integrated with single-mode optical fibers or photonic crystal waveguides. In this paper, we present a new platform for chemical sensing and bio-sensing using optical taper waveguides with these characteristics. The principle of operation is based on the coupling efficiency and interference properties of optical directional coupler (DC) and multi-mode interference coupler (MMIC). First, the curvature characteristics of taper sections of DC and MMIC is explained, and the design specifications of optimized taper waveguide to increase waveguide sensitivity is selected. Next, the sensor response to the change in refractive index of sensing analyte is numerically analyzed. Numerical results show that as the length of couplers increases, the effective index per change in refractive index unit (RIU) of analyte increases, and that sensitivity can be tuned using taper DC and MMIC design techniques.

• Clean Technology
• /
• v.30 no.1
• /
• pp.13-22
• /
• 2024

In this study, blended 6,13-Bis(triisopropylsilylethynyl)pentacene (TP):2-Decyl-7-phenyl[1]benzothieno[3,2-b][1] benzothiophene (BT):Poly styrene (PS) TFT at different ratios were explored for their potential application as light absorption sensors. Due to the mixing of BT, both off current reduction and on/off ratio improvement were achieved at the same time. In particular, the TP:BT:PS (1:0.25:1 w/w) sample showed excellent light absorption characteristics, which proved that it is possible to manufacture a high-performance light absorption device. Through analysis of the crystal structure and electrical properties of the various mixing ratios, it was confirmed that the TP:BT:PS (1:0.25:1 w/w) sample was optimal. The results of this study outline the expected effects of this innovation not only for the development of light absorption devices but also for the development of mixed organic semiconductor (OSC) optoelectronic systems. Through this study, the potential to create a multipurpose platform that overcomes the limitations of using a single OSC and the potential to fabricate a high-performance OSC TFT with a fine-tuned optical response were confirmed.