• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2164-2170
• /
• 2011

Rapid surge in date quantity lead to increase in storage demand from corporate. The existing SAN with fiber channel is being changed to IP-based SAN environment due to installment and maintenance cost. But the IP-based network still have some similar security problems as existing TCP/IP network. Also, for the security reasons of storage traffic, data are encrypted, but with the existing system, data larger than 10G can't be handled. To address security and speed issue, this paper proposes to a structure applied to IP SAN environment with Parallel Structure Word-based FSR (PS-WFSR) as hardware.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.4
• /
• pp.63-74
• /
• 1995

본 연구의 목적은 주택의 냉방 및 난방에너지 절약을 위한 적절한 식재계획의 지침을 제시하기 위함이었다. 본 연구의 대상지는 미국 중동부 내륙의 한 도시인 쉬카고(Chicago)의 북서쪽에 위치한 주거지였다. 쉬카고 는 온대 기후대에 속하는 도시로서, 본 연구는 한국 중부지역의 주택들에 있어서 식재를 통해 냉방 및 난방에너지를 절약하고, 또한 그 에너지 절약 으로부터 대기오염물의 배출을 저감하는데 유용한 정보를 제공할 것이라고 사료된다. 본 연구는 주택의 에너지 절약에 기여하는 주택주변 현존 식생 의 차양(Shading), 증발산 및 방풍의 효과를 모델링하였다. 식재로부터 절 약된 에너지의 총비용은 식생피도가 58.9%인 주거블럭에서 1993년 한해동 안 한 가구당 46.3달러였다. 그 중, 증발산효과가 53.7%, 방풍효과가 26.1%, 차양효과가 20.2%를 각각 차지하였다. 한편, 피도가 36.3%인 주거블럭에서 의 연간 총 에너지 절약은 가구당 8.6달러였다. 식생피도가 높은 주거지에 서 식재에 의한 에너지 절약의 효과는 더욱 증대되었다. 그러나, 대부분의 현존 수목은 부적지에 위치되어 겨출철에 주택내로의 광선의 입자를 차단 함으로써 난방에너지의 요구를 증가시켰다(수목 한 개체당 최대 6달러). 차 양효과를 최대화하기 위해서는 주택건물의 남쪽가까이에서는 교목의 식재 를 가급적 회피하고, 수관이 가능한 한 넓은 교목을 주택건물의 서쪽과 동 쪽가까이에 식재하여야만 한다. 증발산과 방풍의 효과를 증진하기 위해 건 물의 북쪽, 북동쪽 및 북서쪽에서의 고밀도 식재가 요구된다.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.147-151
• /
• 2019

Modern people spend most of their daily lives in their homes, schools, or workplaces, hospitals, shopping malls, subway stations, rooms, and parking lots. According to the survey, air quality management at the multi-use facility is less than 50% satisfied. In this study, a photocatalytic filtration system is developed by utilizing a broadband-to-active photocatalyst that utilizes a media photocatalyst filter that removes airborne germs from indoor air as well as indoor air quality and operates on visible light as well as ultraviolet light.

• Composites Research
• /
• v.21 no.1
• /
• pp.8-15
• /
• 2008

Single-walled carbon nanotube networks(SWNT-networks) were uniformly formed on a glass substrate by the dip-coating method. The changes of electrical and optical properties of SWNT-networks were investigated with respect to processing variables including number of dip, concentration of SWNT-colloidal solution, withdrawal velocity. Consequently, the sheet resistance and transmittance of the SWNTs-networks were sensitively controlled by the processing variables. The networks have highly uniform sheet resistance and optically excellent transmittance within the range of visible ray.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.446-455
• /
• 2008

The aim of this study was to evaluate the effect of fluoride varnish application on enamel decalcification. Eighty bovine enamel blocks divided randomly into 4 groups. Group I is the control group. Group II was treated with the APF gel and washed after 4 minutes. Group III and IV was treated with Fluor $Protector^{(R)}$ and $CavityShield^{TM}$ and washed after 1 minutes. Decalcification were created by placing all specimen into artificial acidic solution(pH 4.0). Then the optical density of the lesions were measured by visible light fluorescence and the lesion depths were measured. The results were : 1. The optical density of group II was higher than group I but lower than group III, IV(p<0.05) and there was no difference between group III, IV(p>0.05) at 48 hours. 2. The optical density of group IV was highest at 72 hours(p<0.05). 3. Mean lesion depths were $205.36{\pm}42.85{\mu}m$ and $210.81{\pm}44.60{\mu}m$ in group I, II but no significant difference between two groups(p>0.05). 4. Mean lesion depths were $80.03{\pm}21.66{\mu}m$ and $77.46{\pm}27.72{\mu}m$ in group III, IV but no significant difference between two groups(p>0.05). Fluoride varnish treatment resulted in a significant reduction in lesion depth compared with APF gel. Fluor $Protector^{(R)}$ and $CavityShield^{TM}$ provided the similar effect.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.385-393
• /
• 2009

The spectroscopic characteristics of Madagascar tourmaline were investigated by UV-Vis and FTIR spectroscopy. Physical features were similar to other region's tourmalines. The green and blue samples showed strong absorption band in the 714~743 nm due to $Fe^{3+}$, pink samples showed strong absorption band in the 510~530 nm due to $Mn^{3+}$, brown samples showed strong absorption at 324 nm due to $Mn^{2+}-Ti^{4+}$ IVCT and the colorless samples only revealed weak absorption at 406~413 nm or no absorptions due to low quantity of Mn. Combination of the stretching and bending mode cationic hydroxyl units (metal-OH) are observed in the 4300~4500 $cm^{-1}$. The parallel tube-shaped inclusions which contain hematite were detected generally. This investigation revealed that Cu was not detected but Fe and Mn were detected in the Madagascar tourmalines, and the various colors appear according to the amount of those impurity elements.

• Korean Journal of Remote Sensing
• /
• v.22 no.2
• /
• pp.141-151
• /
• 2006

UV-visible absorption measurement techniques using several horizone viewing directions in addition to the traditional zenith-sky pointing have been recently developed in ground-based remote sensing of atmospheric constituents. The spatial distribution of various trace gases close to the instrument can be derived by combing several viewing directions. Multi-axis differential optical absorption spectroscopy (MAX-DOAS) technique, one of the remote sensing techniques for air quality measurements, uses the scattered sunlight as a light source and measures it at various elevation angles (corresponding to the viewing directions) by sequential scanning with a stepper motor. A MAX-DOAS system developed by GIST/ADEMRC has been applied to measuring trace gases in urban air and plumes of the volcano and fossil fuel power plant in January, May, and October 2004, respectively. MAX-DOAS spectra were analyzed to identify and quantify $SO_2,\;NO_2,\;BrO,\;and\;O_4$ (based on Slant Column Densities, SCD) in the urban air, volcanic plume, and fossil fuel power plant utilizing theirs specific structured absorption features in the UV-visible region. Vertical scan through the multiple elevation angles was performed at different directions perpendicular to the plume dispersion to retrieve cross-sectional distribution of $SO_2\;or\;NO_2$ in the plumes of the volcano and fossil fuel power plant. Based on the estimated cross sections of the plumes the mixing ratios were estimated to 580 $SO_2$ ppbv in the volcanic Plume, and 337 $NO_2\;and\;227\;SO_2$ ppbv in the plume of the fossil fuel power plant, respectively.

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.264-270
• /
• 2008

$\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films were selfassembled using the layer-by-layer method on the reactive of glass slides functionlized with 3-aminopropyltrimethoxysilane. The functionalized glass slides were alternately soaked in the solutions containing $\alpha$-D-mannosyl fullerene[$C_{60}$] and 4-aminothiophenoxide/hexanethiolate-protected gold nanoparticles. $\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films have grown up to 5 layers depending on the immersion time. The self-assembled nanoparticle films were characterized using UV-vis spectroscopy showed that the surface plasmon band of gold at 530 nm gradually became more evident as successive layers were added to the films.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.414-419
• /
• 2008

3D rendering is a critical process for a movie production, advertisement, interior simulation, medical and many other fields. Recently, several effective rendering methods have been developed for the photo-realistic image generation. With a rapid performance enhancement of graphics hardware, physically based 3D rendering algorithm can now often be approximated in real-time games. However, the high quality of global illumination, required for the image generation in the 3D animation production community is a still very expensive process. In this paper, we propose a new rendering method to create photo-realistic global illumination effect efficiently by harnessing the high power of the recent GPUs. Final gathering routines in our global illumination module are accelerated by programmable graphics hardware. We also simulate physically based light transport on a ray tracing based rendering algorithm with photon mapping effectively.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.971-981
• /
• 2006

As shear-warp volume rendering is the fastest rendering method among the software based approaches, image quality is not good as that of other high-quality rendering methods. In this paper, we propose two methods to improve the image quality of shear-warp volume rendering without sacrificing computational efficiency. First, supersampling is performed in intermediate image space. We propose an efficient method to transform between volume and image coordinates at the arbitrary ratio. Second, we utilize pre-integrated rendering technique for shear-warp rendering. We propose new data structure called overlapped min-max map. Using this structure, empty space leaping can be performed so that we can maintain the rendering speed even though pre-integrated rendering is applied. Consequently, shear-warp rendering can generate high-qualify images comparable to those generated by the ray-casting without degrading speed.