• Title/Summary/Keyword: 광반응

Search Result 1,411, Processing Time 0.043 seconds

The Performance of Photocatalyst filter for an Air Cleaner - Effect of supporter (공기정화기용 광촉매 필터의 성능 - 담지체 영향)

  • Jang, Hyun-Tae;Choi, Sang-Il;Kim, Jeong-Keun
    • Proceedings of the KAIS Fall Conference
    • /
    • 2006.11a
    • /
    • pp.276-279
    • /
    • 2006
  • 내부 순환형 회분식 반응기에서 UV/$TiO_2$ 시스템을 이용하여 기상의 아세톤과 알데히드류 유기화합물 분해 반응 특성을 온도와 농도 및 자외선 파장 및 광도에 대하여 고찰하였다. 또한 기존의 공기정화기에 장착할 수 있는 담체를 도출하고자 하였다. 새로운 광촉매 담지체로는 전처리 필터로 사용되는 메쉬망 형태를 사용하였으며, 광조사율이 높고 광촉매의담지량을 늘릴 수잇는 방안에 대한 연구를 수행하였다. 본 연구 결과 광접촉 면적 대비 높은 반으성을 나타내었으며 Pt, Pd 등의 첨가에 의한 반응성 상승이 나타났다. 메쉬망 형태의담지체 사용시 광조사면적 대비 담지량의증가에 의하여 온도에 의한 흡착특성에 따른 영향을 더 크게 받는 것으로 나타났다.

  • PDF

A Study on the Reaction Characteristics of $CO_2$ Mineral Carbonation by Using Serpentine (Serpentine을 이용한 $CO_2$ 미네랄 탄산염화 반응 특성에 관한 연구)

  • 이대환;김형택;최병철;최봉국
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 2003.05a
    • /
    • pp.679-684
    • /
    • 2003
  • 급속한 경제성장과 산업발달로 인해 국내외 에너지 소비량은 매년 크게 증가하고 있으며 이에 따라 화석연료의 사용도 증가하는 추세이다. 연소반응을 통한 화석연료의 사용은 GHG 중 가장 큰 요인인 $CO_2$를 배출한다. 따라서 막대한 양으로 배출되고 있는 $CO_2$ 발생을 억제하기 위하여 다양한 이산화탄소 고정화 기술이 연구 중에 있다. 그 중에서 경제성이 있고, 환경친화적이며 대량의 $CO_2$를 안정적이고 영구적으로 처리할 수 있는 기술로 주목되고 있는 연구가 광물질을 이용한 $CO_2$ 미네랄 Carbonation 처리기술에 대하여 반응특성을 고찰하였다. 대상 광물질로 Ca 보다 $CO_2$ 처리 시 친화적인 것으로 알려진 Mg가 많이 함유된 Silicate 계열의 사문석(Serpentine[Mg$_3$Si$_2$O$_{5}$(OH)$_4$])을 대상으로 Carbonation 반응특성을 실험을 통하여 고찰하였다. 실험은 TGA를 이용한 분석실험과 200cc 급 Autoclave를 이용한 $CO_2$의 직접주입실험을 수행하였다. TGA분석과 200cc 급 Autoclave를 이용한 실험을 통해서 Serpentine 의 경우 실험에서 정한 운전조건에서 $CO_2$와의 Carbonation 반응에 적합한 물질로 판단된다는 결론을 도출하였다.

  • PDF

Development of Drought Stress Measurement Method for Red Pepper Leaves using Hyperspectral Short Wave Infrared Imaging Technique (초분광 단파적외선 영상 기술을 이용한 고추의 수분스트레스 측정 기술 개발)

  • Park, Eunsoo;Cho, Byoung-Kwan
    • Journal of Bio-Environment Control
    • /
    • v.23 no.1
    • /
    • pp.50-55
    • /
    • 2014
  • This study was conducted to investigate the responses of red pepper (Hongjinju) leaves under water stress. Hyperspectral short wave infrared (SWIR, 1000~1800 nm) reflectance imaging techniques were used to acquire the spectral images for the red pepper leaves with and without water stress. The acquired spectral data were analyzed with a multivariate analysis method of ANOVA (analysis of variance). The ANOVA model suggested that 1449 nm wavebands was the most effective to determine the stress responses of the red pepper leaves exposed to the water deficiency. The waveband of 1449 nm was closely related to the water absorption band. The processed spectral image of 1449 nm could separate the non-stress, moderate stress (-20 kPa), and severe stress (-50 kPa) groups of red pepper leaves distinctively. Results demonstrated that hyperspectral imaging technique can be applied to monitoring the stress responses of red pepper leaves which are an indicator of physiological and biochemical changes under water deficiency.

Design of a Depth Encoding Detector using Light Guides with Different Reflector Patterns for Each Layer (각 층별 반사체 패턴이 서로 다른 광가이드를 사용한 반응 깊이 측정 검출기 설계)

  • Seung-Jae, Lee
    • Journal of the Korean Society of Radiology
    • /
    • v.17 no.1
    • /
    • pp.31-36
    • /
    • 2023
  • Among imaging and treatment devices for small animals, positron emission tomography(PET) causes a change in spatial resolution within a field of view. This is a phenomenon caused by using a small gantry and a thin and long scintillation pixel, and detectors that measure the interaction depth are being developed and researched to solve this problem. In this study, a detector that measures the interaction depth was designed using several scintillator blocks and light guides with different reflector patterns. The scintillator block composed of 4 × 4 arrays of 3 mm × 3 mm × 5 mm scintillation pixels formed four layers, and a light guide was inserted in each layer to configure the entire detector. In order to check whether the interaction depth was measured, a gamma ray interaction was generated at the center of all scintillation pixels to acquire data and then reconstructed into a flood image. The reflector patterns of the light guides inserted between the layers were all different, so the positions of the scintillation pixels for each layer were formed in different locations. It is considered that even spatial resolution can be achieved over all regions of the field of view if all positions of the scintillation pixels thus formed are separated and used for image reconstruction.

Modification of Quantum Dot Sensitized ZnO Nanowires for Stable Photoelectrochemical Hydrogen Generation

  • Seol, Min-Su;Jang, Ji-Uk;Jo, Seung-Ho;Lee, Jae-Seong;Yong, Gi-Jung
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.676-676
    • /
    • 2013
  • 무기물 양자점을 광감응 염료로 사용하는 경우 양자점의 사이즈 조절만으로 밴드갭을 조절할 수 있어 광학적 특성 조절이 용이하며, 유기 염료보다 광흡수 능력이 뛰어난 장점을 가진다. 특히 카드뮴 계열의 CdS, CdSe 양자점을 순차적으로 증착하여 사용하는 경우 가시광 전 영역을 효율적으로 흡수, 이용할 수 있어 광전기화학 셀의 광전극으로 사용 시 높은 성능을 기대할 수 있다. 하지만, 카드뮴 계열 양자점의 경우 광전기화학 셀로의 구동에 있어 안정성이 낮은 문제점이 있으며, 이는 양자점에 남아있는 정공이 관여하는 양자점 부식 반응으로 인한 것이다. 본 연구에서는 보다 안정적이면서도 고효율의 광전기화학적 수소생산 시스템을 위해, CdSe/CdS 양자점 감응형 ZnO 나노선 광전극에 IrO2 촉매물질을 증착하였다. CdSe/CdS 양자점이 가시광 전 영역을 흡수하며, ZnO 나노선 구조를 통해 생성된 광전자를 효율적으로 포집하여 높은 광전류 특성을 기대할 수 있다. 나아가 산소생산용 조촉매로 많이 사용하는 $IrO_2$ 촉매 물질의 추가증착을 통해 양자점에서 생긴 정공을 빼 줌으로서 정공이 관여하는 양자점 부식 반응을 방지할 수 있다. 실험결과 촉매물질의 증착 이후 광전류 생성 특성 및 수소생산량이 증가하였으며, 안정성 또한 상당히 향상된 것을 확인할 수 있었다.

  • PDF

Design and Fabrication of Light-guiding Plate for a Photobioreactor by Using Sunlight and Linear Fresnel Lens (태양광과 선형 프레넬 렌즈를 이용한 광생물반응기용 도광판 설계 및 제작)

  • Kim, Hun;Shin, Seong Seon;Hwang, Min Yong;Lim, Hyon Chol;Kim, Gwang Ho;Kim, Jong Tye;Jeong, Sang Hwa;Park, Jong Rak
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.30 no.2
    • /
    • pp.143-147
    • /
    • 2013
  • We present results of the optical design and fabrication of a light-guiding plate (LGP) for a photobioreactor by using sunlight and a linear Fresnel lens. LGP patterns were designed by optical simulations with an illumination design tool, LightTools, and fabricated by using a computerized numerical control machine. Optical characteristics of average deviation of illuminance distribution and light throughput efficiency were measured and compared with simulation results.

LIGHT TO DIGITAL SENSOR DESIGN OF TWO-CHANNEL SYSTEM (TWO-CHANNEL 방식의 디지털 광센서 설계)

  • Han, M.H.;Han, D.H.;Yoon, J.H.;Ahn, H.T.
    • Proceedings of the KIEE Conference
    • /
    • 2007.11a
    • /
    • pp.118-119
    • /
    • 2007
  • TWO-CHANNEL방식의 디지털 광센서는 I2C의 출력을 가지고 있다. 하나의 CMOS집적회로에 포토다이오드와 기존의 아날로그-디지털 변환기(ADC)로 구성되어 있었던 방식과는 달리 2개의 비교기(Comparotor)로 2개의 채널을 형성하게 된다. 인간의 눈과 비슷한 반응을 얻기 위해 16-bit의 유효 범위를 갖는다. 이 광센서는 광원의 넓은 파장에 적합하게 설계 되었다.

  • PDF

Effect of Light Quality on Growth of Cucumber Plug Seedlings (광질이 오이 플러그 묘의 생육에 미치는 영향)

  • 용영록;황세진;김일섭
    • Proceedings of the Korean Society for Bio-Environment Control Conference
    • /
    • 2000.10b
    • /
    • pp.89-93
    • /
    • 2000
  • 광파장 및 조사시기에 따른 오이묘의 생육 반응을 검토하였다. 광원에 따른 오이 묘의 생육상태를 조사해본 결과 청색광, 적색광을 처리한 것이 생체중, 하배축 무게, 근중이 증가하면서 하배축의 신장이 억제되었고, 청색광과 적색광을 혼합하여 야간 12시간씩 조사하여 30일간 육묘해 본 결과 뿌리의 발육도 우수하고, 줄기와 잎의 생육 정도에서도 우량묘의 소질을 보였다. 청색광과 적색광을 혼합하여 야간 6시간과 12시간씩을 조사하여 30일간 육묘한 결과 하배축의 길이는 각각 60.0mm와 44.9mm였고, 하배축의 무게는 0.59g, 0.62g으로 나타나 12시간 조사구가 하배축의 신장억제효과가 큰 것으로 나타났다. 하배축의 엽록소 함량은 청색광과 적색광의 조사시간이 길어질수록 뚜렷이 증가하였고, 식물체도 진한 녹색을 나타냈다. 광처리구와 무처리구의 오이묘 하배축의 횡단면과 종단면을 검경하여 세포구조를 비교해 본 결과 광처리구의 횡단면 표피조직은 단층의 밀착된 세포로 되어 있으며, 바깥쪽 세포는 현저하게 두꺼웠다. 후각조직의 세포는 작고 부정형이며, 세포간극이 조밀하였으며, 세포구조도 치밀한 특성을 보였다. 종단면은 광처리구에서 세포가 짧고 세포간에 간극이 없는 반면 무처리구는 세포가 길고 뚜렷이 구분되지 않은 것이 관찰되어 대체로 광처리구는 무처리구에 비해 세포신장이 억제되는 대신 세포구조가 치밀하여 식물체의 도장이 억제된다는 것을 알 수 있었다.

  • PDF

Liquid Crystal Alignment by Photoreactive 4-Hydroxyazobenzene Thin Film (광감응성 4-Hydroxyazobenzene 박막의 액정 배향)

  • Lee, Won-Ju;Kim, Whan-Ki;Song, Ki-Gook
    • Polymer(Korea)
    • /
    • v.29 no.3
    • /
    • pp.308-313
    • /
    • 2005
  • The effects of molecular environments on photoisomerization of an azobenzene group were investigated using In-situ UV/Vis spectroscopy and optical anisotropy measurement technique. The reversible and repeatable photoisomeritation reactions of azobenzene were observed by irradiating the film containing 4-hydroxyazobenzene and by measuring absorption intensities of the characteristic bands of trans and cis isomers simultaneously. When the self-assembled monolayer with azobenzene groups was used as an alignment layer for a liquid crystal cell, the homeotropic alignment was induced due to their compact packing structures of azobenfene groups along the vertical direction of the substrate. By irradiating UV light on this cell, the trans-azobenzene groups change to cis-isomers through the photoisonlerieation and then resulting in the planar alignment of liquid crystal molecules.

Thermal and Optical Properties of Heat-Resistant Core Materials in Plastic Optical Fiber (내열성 플라스틱 광섬유 코어재료의 열적 및 광학적 성질)

  • Lee Gyu-Ho;Cho Won-Keun;Park Min;Lee Hyun-Jung
    • Polymer(Korea)
    • /
    • v.30 no.2
    • /
    • pp.158-161
    • /
    • 2006
  • Recently the application of plastic optical fiber (POF) in automotives and planes demands the heat-resistant and high refractive index con materials. We synthesized polyglutarimides (PGIs) via imidization of PMMA with primary amines under high pressure and high temperature and investigated thermal and optical properties by varying the molar ratio of amines and the type of amines (ethyl amine vs. isopropyl mine). The degree of imidization was calculated based on the peak intensity in $^1H$ NMR and FTIR. We found that the glass transition temperature $(T_g)$ of PGIs increased over $30^{\circ}C$ compared to the traditional core materials in POF, PMMA, and they are stable up to $300\sim400^{\circ}C$. PGIs anthesized with ethyl mine show the better heat resistance than those with isopropyl amines. Additionally, they show the comparable transparency and higher refractive index than PMMA. It implies that they can be utilized as the excellent photo-efficient and heat-resistant core materials in POF.