• Journal of the Korean Geotechnical Society
• /
• v.40 no.1
• /
• pp.39-46
• /
• 2024

Artificial recharge systems have been employed to solve drought problems due to global climate change. Despite the increased usage, the applications of artificial recharge systems are limited by clogging problems, which reduce recharge rates. In this study, the soil texture and mineral characteristics of alluvial soil in a planned artificial recharge system area were investigated to evaluate the possibility of chemical clogging during the injection of stream water. The primary minerals contained in the clastic particles are quartz, K-feldspar, plagioclase, and biotite, and the secondary minerals filling the pore space are illite, kaolinite and Fe-oxide. The fact that carbonate and sulfate are observed as secondary minerals in the pore space suggests that chemical clogging has not occurred by the interaction between the groundwater and surface water in the study area. Thus, monitoring soil properties, e.g., the formation and growth of secondary minerals in the pore space, is required to investigate the possibility of chemical clogging in artificial recharge systems.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.95-103
• /
• 2002

The object of this study was to interpret the ralationship between expandability (% $S_{XRD}$), MacEwan crystallite thickness ( $N_{CSD}$), and mean fundamental particle thickness ( $N_{F}$ ) in illite-semctite mixed layer (I-S), quantitatively. This interpretation was extracted from comparison of two structural models (MacEwan crystallite model and fundamental particle model) of I-S mixed layers. In I-S structure, % $S_{XRD}$, $N_{CSD}$, and $N_{F}$ are not independent parameters but are related to each others by particular geometric relations. % $S_{XRD}$ is dependent on $N_{CSD}$ by short-stack effect, whereas, % $S_{XRD}$ and $N_{F}$ have relation to smectite interlayer number (Ns)=( $N_{F-}$1)/(100%/% $S_{XRD-}$ $N_{F}$ . Therefore, % $S_{XRD}$ and $N_{F}$ should satisfy a specific physical condition, 1< $N_{F}$ <100%/% $S_{XRD}$, because $N_{s}$ is positive. Based on this condition, this study suggested % $S_{XRD}$ vs $N_{F}$ diagram which can be used to interpret % $S_{XRD}$, $N_{F}$ , $N_{S}$ , and ordering, quantitatively. The diagram was examined by XRD data for I-S samples from Ceumseongsan volcanic complex, Korea. I-S samples showed that $N_{F}$ departs from the physical upper-limit ( $N_{F}$ =100%/% $S_{XRD}$) with decrease in % $S_{XRD}$. This phenomenon may happen due to decrease of stacking-capability of fundamental particles with their thickening.g.s with their thickening.g.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.161-172
• /
• 2017

Clay minerals play a major role in the geochemical cycles of metals in the Critical Zone, the Earth surface-layer ranging from the groundwater bottom to the tree tops. Atomistic scale research of the very fine particles can help understand the fundamental mechanisms of the important geochemical processes and possibly apply to development of hybrid nanomaterials. Molecular dynamics (MD) simulations can provide atomistic level insights into the crystal structures of clay minerals and the chemical reactivity. Classical MD simulations use a force field which is a parameter set of interatomic pair potentials. The ClayFF force field has been widely used in the MD simulations of dioctahedral clay minerals as the force field was developed mainly based on dioctahedral phyllosilicates. The ClayFF is often used also for trioctahedral mineral simulations, but disagreement exits in selection of the interatomic potential parameters, particularly for Mg atom-types of the octahedral sheet. In this study, MD simulations were performed for trioctahedral clay minerals such as brucite, lizardite, and talc, to test how the two different Mg atom types (i.e., 'mgo' or 'mgh') affect the simulation results. The structural parameters such as lattice parameters and interatomic distances were relatively insensitive to the choice of the parameter, but the vibrational power spectra of hydroxyls were more sensitive to the choice of the parameter particularly for lizardite.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.94-104
• /
• 1993

The compositional variation of electrums from gold-silver and antimony deposits in the Dunjeon Baegjeon mining area, range from 22.6 to 69.5 atom% of Ag. Ag contents in electrums vary with paragenetic sequences and associated minerals. Ag contents increase from core to margin in a single grain. Compositional range of electrums from the North ore deposits of the Dunjeon gold mine are from 22.6 to 29.5 atom% of Ag. Electrums contain Cu(0.40 to 0.55 atom%) and Bi(0.35 to 0.67 atom%). Composition of electrums from the South ore deposits of the Dunjeon gold mine vasies from 33.6 to 69.5 atom% of Ag. Cu and As contents in electrums range from 0.20 to 1.92 and from 0.70 to 1.90 atom%, respectively. As the content of Ag in electrums increase, the contents of Bi and As in electrums increase but that of Cu decrease. Electrums of the Baegjeon gold deposits contain 35.6 to 63.5 atom% of Ag, suggesting that Au contents in electrums associated with base metal sulfied be higher than those associate with Ag-minerals. Ag/Au rations in electrums increase with decreasing temperature, salinity and $fs_2$ of the mineralizing solution.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.3
• /
• pp.188-193
• /
• 1982

Granulation formed from mixture of sulfate of potash (SOP) powder and pulverized silica minerals (Zeolite, Serpentine and Talc) was studied to establish granulation rate and physical properties of granules. These mixtures were granulated in a pan granulator with water and granules of SOP were coated with minerals powder. Mixture of SOP and mineral powder by half (w/w) were increased granulation rate compared with pure SOP powder, and talc was superior to them with SOP. Water was needed about 14% to granulate SOP powder alone, but it decreased by 2% with talc and increased by 4% and 2% with zeolite and serpentine, respectively. Granules of mixture of SOP with zeolite were harder than pure SOP granules but with another minerals powder decreased in hardness. Also breaking rate of granules in vinyl parcel falling from 2m height and abrasion rate of granules by agitation were improved by mixing and coating with zeolite but with the other were of inferior.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.355-361
• /
• 2006

Artificially crushed sands occupy approximately 30 percent of the total consumption in South Korea. The demand for the crushed sands is expected to rise in the future. Most manufacturers use granitic rocks to produce the crushed sands. During the manufacturing process, fine fractions (i.e., sludges or particles smaller than 63 microns) are removed through the process of flocculation. The fine fraction occupies about 15% of the total weight. The sludges are comprised of quartz, feldspars, calcite, and various kinds of clay minerals. Non-clay minerals occupy more than 75 percent of the sluges weight, according to the XRD semi-quantification measurement. Micas, kaolinites, chlorite, vermiculite, and smectites occur as minor constituents. The sludges from Jurassic granites contain more kaolinites and $14{\AA}$-types than those from the Cretaceous ones. The chemical analysis clearly shows the difference between the parent rocks and the sludges in chemical compositions. Much of colored components in the sludges was accumulated as the weathering products. Particle size analysis results show that the sludges can be categorized as silt loam in a sand-silt-clay triangular diagram. This result was for her confirmed by the hydraulic conductivity data. In South Korea, the sludges remained after crushed sand production are classified as an industrial waste because of their impermeability, and which is caused by their high silt and clay fractions.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.221-230
• /
• 2002

Weathering of biotite shows a biotite-vermiculite-kaolinite sequence at the early stage, but presents biotite-kaolinite sequence without a significant intermediate phase (vermiculite) at the late stage from the weathering profile of the granitic gneiss. Secondary 1:1 phyllosilicates are kaolinite and halloysite which show different weathering textures originated by a different formation mechanism. Kaolinitization began from the edges of biotite and propagated toward the interior of grain along a multilayered front. $10 \AA$ layers of biotite are interleaving with $7\AA$ layers of kaolinite and c-axis of two phases is consistent. Kaolinite pseudomorph of biotite is isovolumetric, compared to the biotite boundary and includes many band-like porosities parallel to the cleavage. Platy kaolinite formed by 1:1 layer fur layer replacement of biotite. Halloysitization proceeded outward from the grain edges which were foliated as fine flakes and bent at the right angle for cleavage Halloysites were extensively fanning out and greatly increased the volume of grain. This indicated that halloysite tubes were formed by epitaxial overgrowth on the surface of biotite with import of Si and Al from the external solution by dissolution of plagioclase. These halloysites have abnormally high Fe content ( ~11%).

• Tunnel and Underground Space
• /
• v.8 no.3
• /
• pp.249-256
• /
• 1998

Pocheon, Keochang and Sangju granite samples of different granularity and mineralogical composition were thermally treated at pre-determined temperature of $600^{\circ}C$. Thermally-induced microcracks were characterized using an optical microscopy and their effects on the deformation behavior of thermally cycled samples were studied performing compressive mechanical tests. Optical observations shows that by $600^{\circ}C$ nearlly all crystal boundaries open and the new intracrystalline cracks form in the more grains. The intracrystalline cracks are most pronounced at thermally treated Pocheon and Keochang granite samples. Results from mechanical tests represents negative lateral strains, which give negative Poisson's ratios. It is the most probable that negative lateral strains are produced by residual stresses induced during cooling.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.33-43
• /
• 2002

Mineral composition and chemical properties of Hwangto (reddish residual soil) that used in feeding of cattles at Iksan, Jeollabuk-do, Korea were examined according to particle size separation such as gravel, sand, silt, coarse clay and fine clay. Mineral composition analyses reveal that gravel and sand are mainly composed of quartz and feldspars and that kaolin mineral and illite are dominant in clay and silt. Iron oxides are mainly included in fine clay. According to chemical analyses of major elements, Al, Fe and $H_2O$ contents are increased with decreasing of particle size. This trend well agrees with increase of clay minerals in smaller particles, Chemical analyses of trace elements indicate that contents of Zn, Rb, Sr, Ba, Pb significantly differ with particle sizes. Ba and Sr are included in feldspars since these elements are abundant in sand containing abundant feldspars. Pb and Sm are abundant in sample before particle size separation, but the contents are significantly decreased after separation. Therefore, most of these elements appear to be existed as removable phase. Nb, La, Th, Ce are more abundant in silt. The contents of all the other trace elements tend to be increased in smaller particles containing more clay minerals. The contents of changeable cations and teachable elements in acid and alkali solutions are high in clay samples. All the above results indicate that using the portion of smaller particle of Hwangto for livestock feed rather than bulk Hwangto can improve cation exchangeable capacity, ion leaching capacity and sorption properties.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.30-38
• /
• 1997

고속도로변에 설치된 retention pond는 drainage system의 일부분으로 우기에 빗물의 양을 조절하고 고속도로 노면에서 운반되어 retention pond에 유입된 오염된 입자를 침전, 제거시키기 위해 설치되었다. 빗물에 입자상태로 이동된 납, 아연, 카드뮴를 제거하기 위해 설치된 retention pond의 효과를 평가하기 위해 수리지질학적 연구 및 부유퇴적물의 물리화학적 특징을 규명하기 위한 연구가 수행되었다. 부유퇴적물과 비교하기 위해 심하게 오염된 roadside soil과 오염되지 않은 background soil에 대해서도 연구가 수행되었다. 부유퇴적물의 중금속함량은 background Sologne soil에 비해 원소에 따라 2-8배 높다. 그러나, roadside soil의 중금속함량은 부유퇴적물에 비해 7-26배 높다. Sequential extraction methods를 이용하여 분석한 결과 심하게 오염된 roadside soil에 존재하는 납, 아연, 카드뮴은 대부분 쉽게 용해될 수 있는 상태 (Fraction FII, FIII)로 존재하며 반면에 규산염광물과 수반되는 금속함량의 비율은 매우 낮다. 부유퇴적물에서는 규산염광물과 수반되는 금속함량이 전체 금속함량의 1/3까지 크게 증가한다. Roadside soil 과 부유퇴적물사이의 중금속함량 차이가 매우 큰 것은 중금속의 대부분이 retention pond에 이르기 전에 고속도로변과 배수로 일부에 축적되어 모두 상실하기 때문이다.