• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.133-133
• /
• 2001

우리는 괴산 덕평리 지역의 소위 구룡산층과 대전 추부 지역의 창리층 흑색 점판암에 대한 납 동위원소 연대측정 결과를 보고한다. 덕평리 지역의 흑색 점판암은 270 Ma 내외의 Pb-Pb 연대를 보이고 U-Pb 연대는 정의되지 않는다. 그 Pb-Pb 연대는 같은 시료의 22개 uraninite 입자에 대한 CHIME 연대와 오차범위 내에서 일치한다. 이로 보아 uraninite는 형성 또는 변성작용에 의한 동위원소적 재평형 작용 이후 폐쇄계를 잘 유지하였지만 흑색 점판암이 지질학적으로 최근에 지표에 노출된 이후에는 전암 규모에서 개방계로 거동하였음을 알 수 있다. 박편 미조직 관찰에 의하면 흑색 점판암의 1차광물인 uraninite 외에 풍화기원 2차광물인 uranocircite, francevillite가 관찰된다. 덕평리 지역 흑색 점판암의 최고 변성온도 조건은 50$0^{\circ}C$ 내외이므로 (Kim et al., 2000) uraninite CHIME 연대의 폐쇄온도가 50$0^{\circ}C$ 이상이거나 uraninite의 형성시기와 변성시기 사이에 시간차가 거의 없었다고 판단된다. 덕평리 지역의 U 광화작용 시기는 이번 자료에 의해 고생대 말로 정의될 수 있으나 그 연대가 흑색 점판암의 모물질인 해저 흑색 유기질 퇴적물의 초기 속성작용과 관련 있는지 후기의 변성작용과 관련 있는지에 대해서는 광물학적인 연구가 더 진행되어야 한다. 옥천대 변성퇴적암의 일부가 고생대 말에 퇴적되었을 가능성은 황강리층 역의 xenotime 및 monazite에 대한 CHIME 연대측정 결과 (약 367 Ma; Adachi et al., 1996)에 의해서 지지된다. 추부 지역 흑색 점판암의 Pb-Pb 연대는 170 Ma 내외로서 인접한 쥬라기 화강암의 관입시기를 지시하는 것으로 생각된다. 이는 화강암체로부터의 거리로 볼 때 덕평리 지역과 추부 지역의 시료 채취 위치가 유사하지만 지하 천부에 관입한 백악기 속리산 화강암 (91$\pm$6 Ma, Cheong and Chang, 1997)에 의해서는 덕평리 지역 흑색 점판암의 납 동위원소계가 영향받지 않았다는 점과 대조적이다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.89-94
• /
• 2012

ALC was fabricated using cement, lime and quartzite by hydrothermal reaction. The kind of quartzite was reviewed for ALC properties and returned slurry was recycled in this study. Munkyung and Kumpyung quartzite was used and quartzite powder was experimented. The major mineral phase of Munkyung quartzite was quartz and muscovite crystal but that of Kumpyung was quartz. It was certain that crystallinity of Kumpyung quartzite was superior to Munkyung quartzite. Compressive strength and A-number of ALC with Kumpyung quartzite was higher than that of ALC with Munkyung quartzite under similar specific gravity. These results was resulted from major mineral phase, crystallinity and minor components of quartzite.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.293-304
• /
• 2002

Wet purification process for the selective separation of montmorillonite from Gampo 13 and 35 bentonite ores was studied using physical processes such as ultrasonic scrubbing, decantation and centrifugation. Ultrasonic Scrubbing of Gampo 13 and 35 bentonite ores was revealed excellent result at 7 wt.% of slurry density and was almost finished within 30 minutes in the sample of Gampo 13 and 10 minutes in the sample of Gampo 35, respectively After decantation, approximately 52 wt.% from the bentonite of Gampo 13 and 64wt.% from the bentonite of Gampo 35 were recovered as purified products and the CEC was reached up to 119.4 meq/100 g and 124.5 meq/100 g, respectively. Particle separation by centrifugation showed that most of the impurity minerals such as quartz and feldspar were removed within the condition of 1,000 rpm.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.771-786
• /
• 2006

Imha lake has a high turbid water which keeps up during a few months, as comparing to other dams. Origins of the high turbid water derive from suspended materials which compose of micro particles of clay and rock-forming minerals. They are the weathered products from surface rocks that relate with particular geology in drainage field of the Imha dim. Accordingly we have fundamentally surveyed the kinds, properties, distribution and structures of general geology, found a few particular geology that source clay materials, and traced the passage that their weathered products enter the dam. We have suggested the basic origins of increase in turbid degree from detecting kinds and behavior of the suspended materials cause high turbid water in the Imha lake.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.35-45
• /
• 2016

Clays, which are abundant in nature and eco-friendly, have been utilized throughout human history due to their characteristic physicochemical properties. Recently, a variety of clays such as montmorillonite, kaolinite, sepiolite and layered double hydroxide with or without chemical modification have been extensively studied for potential application in industries. Clays that possess a large specific surface area, high aspect ratio, nanometer sized layer thickness and controllable surface charge could be utilized as polymer fillers after appropriate chemical modifications. These modified clays can improve mechanical and gas barrier properties of polymer materials but also provide sustained antibacterial activity to polymer films. Furthermore, engineered clays can be utilized as scavengers for chemical or biological pollutants in water or soil, because they have desirable adsorption properties and chemical specificity. In this review, we are going to introduce recent researches on engineered clays for potential applications in future industries such as food packaging and environmental remediation.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.811-817
• /
• 2003

Recently, application fields of non-metallic minerals by utilizing their structure properties are broadening. Especially, layered minerals have not only excellent shielding or covering ability but also absorbing and storing characteristics of chemical elements between a layers. We considered about the above mentioned characteristics and added functional substances onto their surfaces for the preparation of new environmentally friendly functional materials. In this study, natural graphite and sericite were mainly used to produce for the new environmentally friendly functional building materials. Graphite surfaces were modified with a surfactant (Alkyl Benzyle Demethyle Ammonium Chloride) for anti-bacillus and penicillium. Surface modification mechanism are that primary adsorption by differential zeta potential between graphite and ABDM and secondary adsorption by interaction between surfactant chains take place. Surfactant layers were fully formed and it was expected up to 99.7% up the efficiency of anti-bacillus and penicillium. Also the prepared functional samples have a effect to improve a various efficiency such as electromagnetic wave shield(up to 95%), deodorization(up to 80%), heat storage(5%) etc.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.55-65
• /
• 2014

On this studyed, the Wibongsa BoGwangMyungJun BaekEuiKwanEum wall-painting was conservation of Scientific research ahead. This study carried out Grain size analysis, SEM-EDS, XRD, P-XRF, FT-IR and ultrasonic exploration for wall-painting. As a result, walls layer used to mineral particles size was mixing the medium-texture and fine texture. painting layers pigments used to base paintings was ocher, white pigments was hobun, red pigments was suckganju, green pigments was suckruk. Also BackuiKannon wall-painting walls damage reason of that was long-term physical shocks. painting layers damage was include detachment or powders. it is affected by temperature and humidity. Therefore in the future conservation of wall-paintings through scientific analysis based on such data, conservation processing is performed through the preservation and enhance the stability of the paintings as a basis for the conservation of management can be utilized.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.1
• /
• pp.63-70
• /
• 2013

We report an easy and efficient method for separating zircon grains using a gold pan and disposable sieve together with the tap water. Samples powdered to less than $230{\mu}m$ in grain size are placed on the water-filled pan tilted at about $10^{\circ}$. The outflowing water flooded with low-density particles is screened by a ${\sim}70{\mu}m$ sieve. The most efficient rate of water outflow is estimated to be 0.1 L/sec, when the distance between the tap and the surface of water-filled pan is kept at 20-25 cm. After 20-30 minutes of water outflow, heavy mineral fractions are ready for zircon collection using a hand magnet (and heavy liquid when necessary) or simply hand-picking. This procedure is most likely applicable for the separation of other heavy minerals including monazite.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.187-194
• /
• 2017

In this study, marble that consist mainly of calcite were used for applicability evaluation after treated with consolidant such as alkoxysilane series of 0.8T0.2E1G_3wt0.08% and 1T1G_7wt0.08%. The position and intensity of X-ray diffraction peaks are no change and increasing trend after treated with two consolidants. The results of scanning electron microscopic analysis, morphology of rope type and homogeneous surface of platy or leaflike form observed on the marble after treated with 0.8T0.2E1G_3wt0.08% and 1T1G_7wt0.08%, respectively. Brightness of surface after treated with consolidant are changing slightly dark. Shore hardness and ultrasonic velocity values show increasing after treated on the marble surface with two consolidants.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.7
• /
• pp.385-390
• /
• 2017

This study investigated removal characteristic of soluble Cs in water by RPT (Radioactivity pollutant treatment) with coagulation and sedimentation. The RPT conducted with various chemical and natural coagulants to remove the soluble Cs which consisted pre-adsorption, Sedimentation and post-adsorption. Natural absorbent included Illite and zeolite. Especially, Illite divided LPI (Large Particle Illite) and SPI (Small Particle Illite) by grain size. Also, Chemical coagulants included high basicity PAC (poly aluminum chloride). The adsorbent had a plate structure mainly composed of quartz, albite and muscovite. The surface area were $4.201m^2/g$ and $4.227m^2/g$ and the particle sizes were $197.4-840.9{\mu}m$ and $3.28-53.57{\mu}m$, respectively. The adsorption efficiency of the natural Illite was 82.8% for LPI and 85.6% for SPI. The removal efficiency of turbidity, which was an indirect indicator of adsorbent recovery, was 96.4% and 98.3%, respectively.