• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.218-224
• /
• 1999

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using short wavelength laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates with high is regarded as the most suitable process to manufacture optical disk substrates with high dimensional accuracy low residual stresses and superb optical properties In the present study polycarbonate optical disk substrates were fabricated by injection compression molding and the birefringence regarded as one of the most important optical properties for optical disk is measured. The effects of various processing conditions upon the development of birefringence distribution were examined experimentally. It was found that the value of the birefringence distribution were very sensitive to the mold wall temperature history and the variance of the birefringence distribution in the radial direction was affected by the level of the packing and the compression pressure.

• 한국고분자학회지:고분자과학과기술
• /
• 제7권3호
• /
• pp.284-290
• /
• 1996

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.2050-2057
• /
• 1999

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using short wavelength laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates with high dimensional accuracy, low residual stresses, and superb optical properties. In the present study, polycarbonate optical disk substrates were fabricated by injection compression molding and the birefringence, regarded as one of the most important optical properties for optical disk, is measured. The effects of various processing conditions upon the development of birefringence distribution were examined experimentally. It was found that the values of the birefringence distribution were very sensitive to the mold wall temperature history and the variance of the birefringence distribution in the radial direction was affected by the level of the packing and the compression pressure.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.46-54
• /
• 2001

Technology of data storage device has developed noticeably as demands and needs of new media increase, Huge data can be conveniently handled using removable type optical disk. In the present paper, the trend and current issue of development for optical disk media are introduced. Standardization of next generation optical disk media, technology of recording and reading, and applications of magneto-optical devices are also discussed. Finally, a methodology of process optimization for design and fabrication of high density optical disk substrate is proposed.

• 한국재료학회지
• /
• 제8권10호
• /
• pp.961-968
• /
• 1998

상변화형 광디스크의 보호막으로 사용되는 $ZnS-SiO_2$ 유전체막을 RF magnetron 스퍼트링방법에 의하여 제조하는 경우에 기판 바이어스전압의 영향을 조사하기 위하여, 알곤가스 분위기에서 ZnS(80mol%)-$SiO_2$(20mol%)타겟을 사용하여 Si Wafer와 Corning flass 위에 박막을 증착시켰다. 본 실험에서는 여러 실험 변수를 효과적으로 조절하면서 실험의 양을 줄이고 도시의 산포를 동시에 만족시키는 최적조건으로 타겟 RF 출력 200W, 기판 RF 출력 20W, 아르곤 압력 5mTorr과 증착시간 20분을 얻을 수 있었으며, 신뢰구간 95%에서 확인실험을 수행하였다. 증착된 박막의 열적 저항성을 측정하기 위해 $300^{\circ}C$와 $600^{\circ}C$에서 열처리시험을 수행하였고, Spectroscopic Ellipsometry 측정을 통한 광학적 데이터를 바탕으로 Bruggeman EMA(Effective Medium Approximation)방법을 이용하여 기공(void)분률을 측정하였다. 본 연구결과에 의하면 특성치 굴절률에 대하여 기판 바이어스인자와 증착시간 사이에는 서로 교호작용이 강하게 존재함을 확인할 수 있었다. TEM분석과 XRD 분석 결과에 의하면 기판 바이어스를 가한 최적조건에서 증착된 미세조직은 기존의 바이어스를 가하지 않을 조건에서 증착시킨 박막보다 미세한 구조를 가지며, 또한 과도한 바이어스전압은 결정구조의 조대화를 야기시켰다. 그리고 적절한 바이어스전압은 박막의 밀도를 증가시키며, 기공분률을 약 3.7%정도 감소시킴을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.432-437
• /
• 2001

It is necessary to improve mechanical and optical porperties in the optical disk substrates as the information storage devices with high storage density using blue laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates for quality recording and read-out. In the present research, the effects of processing conditions and the insulation layer thickness on gapwise birefringence and the land-groove pattern were investigated. It was found that the values of the birefringence distribution were very sensitive to mold temperature history, and the level of birefringence reduced and, furthermore, the quality of replication was improved due to the insulation layer.

• 한국재료학회지
• /
• 제9권12호
• /
• pp.1245-1251
• /
• 1999

상변화형 광디스크는 직접 반복기록에 의한 고속기록, 고밀도화가 가능하고 높은 전송속도, 재생신호의 C/N (carrier to noise) 비가 좋은 장점을 가지고 있으나 반복되는 열에너지에 의한 디스크의 변형과 소거도의 저하, 기록 반복성의 저하가 문제가 된다. 이러한 반복성의 저하를 개선하기 위해 적절한 디스크의 구조와 기록막의 상하부에 유전체 보호막인 ZnS-$SiO_2$ 박막층을 삽입하였다. 박막 제조시 많은 실험변수의 제어를 위해 다꾸찌 방법을 통하여 타겟 R.F. Power 200W, 기판 R.F. Power 20W, 아르곤 압력 4mTorr, 전극거리 6cm의 최적조건을 얻을수 있었다. TEM과 XRD분석 결과, 전극거리가 가까워질수록 높은 증착속도로 인하여 미세한 조직구조를 가지고 있으며, 일정거리 이상 가까워지면 막의 morphology에 나쁜 영향을 끼침을 알 수 있었다. 이러한 막의 morphology의 영향으로 투과율이 감소하는 것을 확인할 수 있었다. AFM과 SEM분석에서는 전극거리가 가까워질수록 높은 증착속도로 인하여 morphology에 나쁜 영향을 끼치고 있음을 확인할 수 있었다. 최적조건에서 증착한 박막은 우수한 morphology를 가진 초미세구조의 치밀하고 결함이 없는 박막이었다. 이 박막은 상변화형 광디스크에서 열적 변형을 억제하고, 열전도를 감소시켜 우수한 유전체 보호피막의 역할을 할 수 있다. 그리고, 전극거리가 ZnS결정립의 크기와 증착속도, morphology에 미치는 영향에 대해 고찰하였다.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.631-636
• /
• 2002

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using blue laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates for quality recording and read-out. In the present research, the effects of mold temperature and the insulation layer thickness on gapwise birefringence and the land-groove pattern were investigated. It was found that the values of the birefringence distribution were very sensitive to mold temperature history, and the level of birefringence reduced and, furthermore, the quality of replication was improved due to the insulation layer.

• 소성∙가공
• /
• 제9권2호
• /
• pp.103-111
• /
• 2000

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage density using short wavelength laser are being developed. The birefringence distribution is regarded as one of the most important optical properties for optical disk. In the present study, the birefringence distrubution is calculated using the Leonov model for viscoelastic constitutive equations and Cross/WLF model for viscosity approximation. The effects of processing conditions upon the development of birefringence discosity approximation. The effects of processing conditions upon the development of birefringence distribution in the optical disk were examined theoretically. It was found that the values of the birefringence distributions were very sensitive to the mold wall temperature history which minimizes the birefringence distribution. The analytical results showed the possibility of improving mechanical and optical properties in the optical disk substrates by active control of the mold wall temperature history.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.80-83
• /
• 2003

Transcribability of pit or land groove structures in replicating an optical disk substrate greatly affects the performance of a high-density optical disk. However, a solidified layer, generated during the polymer filling, deteriorates transcribability because the solidified layer prevents the polymer melt in filling the sub-micro patterns. Therefore, the development of the solidified layer during filling stage of injection molding must be delayed. For this delay, passive heating by insulation layer has been used. In the present study, to examine the development of the solidified layer delayed by passive heating, the flow of polymer melt with passive heating was analyzed. Passive heating markedly delayed the development of the solidified layer, reduced the viscosity of the polymer melt, and increased the fluidity of the polymer melt in the vicinity of the stamper surface with the sub-micro patterns. As a result, we predict that passive heating can improve transcribability of an optical disk substrate. To verify our prediction, we fabricated an optical disk substrate by using passive heating of a mold and measured the transcribability.