• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.13-18
• /
• 1975

This study was intended to clarify interrelations among seven characters of bamboo and their influences upon its culm-volume. The analysis of covariance was used to obtain phenotypic correlations, genotypic correlations and environmental correlations among some characters of Phyllostachys bambusoides Sieb. et Zucc., and thereby path-coefficients were calculated based on Dewey's method. The characters considered here included the breast height diameter, culm-height, clear-length, subterranean stem, number of bamboo joints, butt-end diameter and culm-volume of bamboo. Average values, standard errors, variances and standard deviations for the characters mentioned above are shown in Table 1, and phenotypic correlations, genotypic correlations and environmental correlations among seven characters are shown in Table 2, according to the results, there are highly significant relationships among lines but not among some replications. According to Table 4, heritability values in the breast height and butt-end diameters are higher than those in other characters mentioned above. On the other hand, environmental correlations among general characters appear to have lower values than phenotypic and genotypic correlations do. It also appears that the butt-end diameter and breast height diameter are highly correlated with the culm-volume of bamboo. The path-coefficients of individual characters to the culm-volume of bamboo are computed from the correlations (Table 4) and presented in Figure 1 and Table 5, where it could shown the direct and indirect effects on the bamboo culm-volume of each character.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.522-526
• /
• 2012

New experimental method to measure solid descending velocity in a vertical downcomer was presented and effects of downcomer diameter and particle properties on descending velocities for Geldart group A, B, and D particle have been measured and investigated. The effect of initial solid inventory on solid descending velocity was negligible. However, solid flow rate, solid circulation rate and solid descending velocity increased as the downcomer diameter increased. Moreover, solid descending velocity increased linearly as the downcomer diameter increased and showed distinguishable trend for Geldart group D particle from Geldart group A and B particles. Empirical correlations of solid descending velocity for Geldart group D and Geldart group A and B particles have been derived based on the measured values. The correlations could predict well the solid descending velocities.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.12
• /
• pp.69-75
• /
• 2013

Pipeline is very important infrastructure which is directly related to our daily life. Nevertheless, it is not considered significantly unless it breaks. As most pipelines are buried at a certain depth from the surface of road pavement in urban areas, they are subjected to traffic load. This paper presents the performance of buried concrete pipe under heavy traffic load. Hence, one of the major factors affecting their performance is burial depth. To consider this factor, the ratio of burial depth (H) to diameter of pipe (D) was defined as a key variable. The integrity of buried concrete pipe was investigated with two cases of ratio of burial depth to pipe diameter (H/D=2 and H/D=4). The results provide the limit burial depth to ensure the soundness of buried concrete pipe subjected to heavy traffic load, and more economical design is anticipated with the results.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2013

$CO_2$ enrichment systems have been recently used to shorten the growth period of plants and the improvement of harvest and its quality. To accomplish these goals, manifold should be designed to supply the same amount of $CO_2$. In this study, CFD approach has been used to understand the effects of geometric parameters, such as tube and hole diameters. An optimized geometry has been derived through pipe and tube part, respectively. As a result, the deviation of flow rate less than 0.1 g/s was expected at all holes of the $CO_2$ enrichment system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.38-46
• /
• 2016

In this study, the bleeding tests were performed to investigate the effects of cement paste(w/c=0.42) on bleeding through varying the number of strand and the diameter of cylinder. The test variables were specified by differing the diameter of cylinder and the number of strand. The bleeding test was performed with respect to all diameter parameters by with or without strand. In addition, the number of strands were specified at four levels, 0, 1, 2, and 3 EA in case of 50 mm cylinder. In case of without strand, the bleeding rate was determined at low level under 2%. Moreover, all of the specimens had similar value in the measurement error. In case of with strand, maximum bleeding rate was 10%. As the diameter of cylinder decreased, the bleeding rate was decreased. The bleeding rate was altered rapidly in between 50 to 100mm of diameter. Even though bleeding rate was increased according to the increase in the number of strand, these tendency for bleeding rate was negligible with the measurement error.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.491-499
• /
• 2010

Heat transfer performance of tube bundles have long been investigated since they were widely used. Most of previous experimental and numerical works for tube bundles were performed with tube diameter in the range of 25~51mm and Reynolds number of $8.000{\leq}Re{\leq}30.000$. Recently, tube bundles with small diameter tube collects interests since the mini-channel tube provides higher compactness. The present work aims to investigate the applicability of previous correlations available in the open literature to the tube bundles with small diameter of 1.5mm and $3.000{\leq}Re{\leq}7.000$. A commercial CFD package was used to analyze the thermal-hydraulic performance of them. The results show that the Zukauskas correlation developed for larger diameter tube and higher Reynolds number are still in good agreement with them within the discrepancy of 4.7%. The analyses also show that the Nuselt number increases with a decrease in the longitudinal pitch.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.27-38
• /
• 2010

A series of model test as well as numerical analysis by FEM was performed to investigate lateral earth pressure acting on a buried pipe in soft ground undergoing horizontal soil movement. A model test apparatus was manufactured so as to simulate horizontal soil movement in model soft ground, in which a model rigid buried pipe was installed. The velocity of soil deformation could be controlled as wanted during testing. The model test was performed on buried pipes with various diameters and shapes to investigate major factors affected the lateral earth pressure. The result of model tests showed that the larger lateral earth pressure acted on the buried pipes under the faster velocity of soil movement. The result of numerical analysis, which was performed under immediate loading condition, showed a similar behavior with the result of model tests under 0.3mm/min to 1.0mm/min velocity of soil deformation. Most of model tests showed the soil deformation-lateral load behavior, in which the first yielding load developed at small soil deformation and elastic behavior was observed by the yielding load. Then, lateral load was kept constant by the second yielding load, in which plastic behavior was observed between the first yielding load and the second yielding one. Beyond the second yielding load, the compression behavior zone was observed. When the velocity was too fast, however, the lateral load was increased with soil deformation beyond the first yielding load without showing the second yielding load. The buried pipes with the larger diameter was subjected to the larger lateral load and the larger increasing rate of lateral load. At small soil deformation, the influence of diameter and shape of buried pipes on lateral load was small. However, when soil deformation was increased considerably, the influence became more and more.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.97-103
• /
• 2015

Natural convection heat transfer rates in vertical pipes were measured varying the diameter, length, and roughness of vertical cylinder. To achieve high Rayleigh number with relatively small test rig, mass transfer experiments instead of heat transfer were performed based on the analogy. Prandtl number was 2,014. The length of vertical cylinder was 0.1m, 0.3m, and 0.5m, which correspond to GrL $4.2{\times}10^7$, $1.1{\times}10^9$, and $5.5{\times}10^9$. To each length of vertical cylinder, the heat transfer rates were measured varying the iameter 0.005m, 0.01m, and 0.03m. The heat transfer rate for a short length pipe(0.1m) agreed with the prediction from Le Fevre correlation developed for a vertical plate for all diameter. The heat transfer rate decreases as the diameter and the length of the pipe increases. The heat transfer rate inside of vertical cylinder is affected by roughness only for a laminar flow regime.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.19-19
• /
• 1999

KSR 3단 AKM Motor Case를 개발하기 위해 추진기관 경량화에 가장 유리하고 비강도 및 비강성이 뛰어난 복합재 연소관을 고려하여 직경 300mm급의 축소형 모델을 선행 개발하였다. Netting 이론에 의해 연소관 두께를 결정하고 체적을 최소화 하기 위해 구형으로 연소관 형상을 설계하였다. 연소관을 제작하기 위한 맨드렐은 분리, 조립식으로 설계, 적용하였고 연소관 기밀 유지 및 추진기관 연소시 연소관을 보호하기 위한 삭마성 재료로 EPDM base의 고무 내열재 조성을 개발하였다. 고무 내열재는 맨드렐 위에 적층하고 Vacuum bagging 상태로 Autoclave에서 가황하여 적용하였다. 국내 최초로 Prepreg를 사용하는 Dry process로 고무 내열재가 적층된 맨드렐 위에 Winding하고, Vacuum bagging 상태에서 경화하여 연소관을 제작하였으며, 이 때 사용한 Carbor/Epoxy Perpreg 재료의 기계적 성질 및 열특성 시험을 병행하였다. 제작된 연소관은 수압 시험을 통하여 구조적 안정성을 입증하였고, NDT 검사를 통해 재료간 계면 상태를 분석하였다. 시험이 끝난 연소관은 향후 점화기 개발을 위하여 점화제 종류 및 약량을 변경하여 점화 시험을 수행하여 점화기 개발을 위한 기초 데이터를 확보하였다.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.263-266
• /
• 1998

외이도의 직경 및 길이와 외이도 질환과의 연관성을 알아보고자 73두 성견을 실 험에 이웅하였다. 임상중상, 배양 및 도말 검사를 통하여 외이 질환이 얼는 정상군 57개의 이 관과, 질환이 있는 비정상군 89개의 이관에 직경과 길이를 평가하기 위한 간접적인 방법으로 이관내 조영술을 실시하였다. 비정상군은 정상군에 비하여 윤상연골 및 귓바퀴 연골의 직경 이 더 넓었다. 수직외이도를 구성하는 귓바퀴 연골의 길이는 비정상군4(12.79{\pm} 3.08)이 정상 군(12.79{\pm}5.87 mm)$에서 보다 유의성 있게 길게 나타났다(p<0.001). 심한 외이도 협착증을 보이는 21개의 귀에서는 외이도 질환을 발견할 수 없었으며, 외이도 질환이 심한 귀에 있어 서 그 직경과 길이가 정상군에 비하여 넝고 길게 나타났다(p<0.05). 본 실험의 결과로 보아 외이도관의 협착증과 외이도 질환과는 연관성이 발견되지 않았으나, 환기와 귀내 분비물의 배출을 방해하는 긴 수직외이도를 갖는 귀가 외이도 질환과 밀접한 관계가 있는 것으로 생각 되었다.