• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.45-54
• /
• 1993

In this paper, the behaviors of reinforced earth retaining walls according to material properties of reinforcement were performed through the centrifuge model tests. Skin element was used flexible aluminum plate in the process of tests. And reinforcements were used with aluminum foil strips and non -woven polyester sheets. As a result of it, model retaining wall utilizing non-woven polyester sheets than aluminum foil strips was supported at high stress level, and maximum horizontal displacement value of skin element was 0.6H height at model walls. In the other hand, coefficient relation diagram for evaluation of horizontal displacement according to skin element location was proposed using test results.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.25-44
• /
• 1974

In the present paper I described the results of the observations made on the visual characteristics such as the annual ring width and summerwood percentage of Pinus koraiensis Sieb. et Zucc. grown at out university forest. The results of the study are as follows: Characteristics of annual ring width and summerwood percentage 1. The range of dispersion of annual ring width and summerwood percentage are respectively 0.5-6.5mm and 5-50% on the normal wood and its arithmetic mean values are each 3.0mm and 24% on all sample trees. 2. The values of annual ring width of heart wood are larger than that of sapwood but on the contrary the values of summerwood percentage of heartwood are smaller than that of sapwood. On the other hand variations of these values are distingushed on the heartwood. 3. The values of annual ring width due to the parts of stem with crown. with clear length and at bottom showed that the largest values are given at the parts of stem with crown. But on the contrary the summerwood percentage values are largest at the parts of stem at bottom on all sample trees. 4. The values of annual ring width and summerwood percentage depending on the stand sides are not obvious. Horizontal and vertical variations of annual ring width and summerwood percentage 5. It was recognized that horizontal (radial direction) variations of annual ring width and summerwood percentage indicated two different patterns (the region of large fluctuation and that of small fluctuation) in a tree stem. These boundaries are seemed to appear at the parts of 12-15 annual rings from pith. 6. According to the increase of height in tree the values of annual ring width increase but the values of summerwood percentage gradually decrease. 7. But vertical variations of annual ring width and summerwood percentage on the sapwood are divided into two different parts (region of increased or decreased upwards and that of remained constant in successive height) in a tree stem and these limits are seemed to appear at the 7m of height in trees. Relations between annual ring width and summerwood percentage 8. The modes of summerwood percentage related with annual ring width are seemed to appear almost in the definite range (10-25%). 9. The relations between annual ring width and summerwood percentage show a highly negatine correlation on all sample trees.

• Journal of Korean Society of Forest Science
• /
• v.31 no.1
• /
• pp.8-20
• /
• 1976

For study on the variation of natural stand, three populations of Pinus densiflora S. et Z. were selected at samsanri Yongogmyun Myongjugun Kangwondo (4), Hawonri seomyun Uljingun Kyongbuk (5), and Emogdong Suweon Kyongkido (6) successibely after the selection of three population in 1974. Twenty individual trees were chosen from each population and the morphological characteristics of trees, needle and wood properties were investigated on the trees. The results are summerized as follows; 1. Serration density, resin canal number in needle did not show significant differences, however stomata row number in the both sides of needle showed highly significant differences among 3 populations. But significant differences were calculated among individual trees in a population regarding any character of needles. 2. Ail population had high correlation on the stomata row between abaxial and adaxial side of needle. 3. The Myongjungun population showed the highest value of resin duct index, which means the population had the highest degree of hybrid character. 4. The ring segment width and summerwood percentage in the wood properties had significant differences, and yet specific gravity and tracheid length had not significant differences statistically among 3 populations. But all the values were significant statistically among the ring segments within population. 5. The ring segment width decreased rapidly with increasing tree age but summerwood percentage, specific gravity, tracheid length increased slowly to the middle age of tree and then decreased slowly after the age. But the patterns of decrease or increase were some different by population. 6. The values of Uljingun population were generally high in the coefficient of variation on all the needle characters. And the values of Suweon population were always the highest and those of Myongjugun population the lowest in the coefficient of variation on all the wood properties.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.47-54
• /
• 2020

This paper proposes a solution to the problems of constructing and installing sway braces for existing standpipes in narrow spaces and pits. The study develops a floor-fixed sway brace for a narrow space that can support the ground area under horizontal seismic loads (X-axis, Y-axis) as well as vertical seismic loads (Z-axis). The results of structural analysis using SolidWorks simulation showed that the eccentric load was generated in the first design according to the anchored position along the vertical direction, and the problem of exceeding the allowable stress of the material along the horizontal and vertical directions. In the second design model, deformation caused by the eccentric load along the vertical direction, similar to the first design model, did not occur. The maximum strain rate was 0.17%, which is approximately 12.84% less than the first design model (Maximum strain rate of 13.01%). It was confirmed that the structural stability and durability improved. Compressive and tensile load testing of the prototypes showed that all of them meet the performance criteria of the standard.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.514-520
• /
• 2002

The electrothermal vaporization (ETV) hollow cathode glow discharge atomic emission spectrometer for analysis of liquid sample has been developed and characterized. This system has improved the sample introduction method of electrothermal vaporization and the hollow cathode glow discharge. The sample introduction method was possible to provide high analyte transport efficiency to the plasma by helix coil made of tungsten material. In addition, small volume samples (<$30{\mu}{\ell}$) could be used. The system has glow discharge cell with special design for improvement of precision. The effect of discharge parameters such as discharge power, gas flow rate has been studied to find optimum condition. The emitted light was effectively carried into detector by fiber optic cable in UV region. The calibration curve of Pb, Cd were obtained with 3 samples.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.52-67
• /
• 1982

We have relatively heavy stocks of hardwood which consist of inferior and nonproductive natural hardwood species in Korea. As conception above to develope these forest resources, the study was carried out to obtain the basical data for the reasonable and efficient utilization of hardwoods. The sample trees were selected 11 natural hardwood species grown in Kangwon-do region and Kwangnoong Experimental Forest. We have investigated anatomical, physical and mechanical properties of them. Especially, Quercus species which is a major species in the forests was investigated on qualities of trees, logs and lumbers, recevery of bucking and lumber yield, etc.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.98-108
• /
• 2006

The vessels, already built and is operating in Korea, have the hull form of catamaran, with LOA(Length Over All) 15 m, LBP(Length Between Perpendiculars) 12 m, GT(Gross Tonnage) 9.77ton, Light Load Displacement 15.1ton. Korean Society of Ship Inspection & Technology, Chungnam National University, Inha University, Seoul National University and Advance Marine Tech co. ltd developed by cooperation it for fishing vessels. And it used FRP(Fiber Reinforced Plastics) for hull material and main engine of diesel $360ps{\times}2800rpm{\times}2sets$ with a water jet system. Based on these results, this paper describe small leisure fishing vessels with multi-hull, in relation to the project of CTYS(Regional Reserch Center for Transportation System of Yellow Sea Inha University) that aimed to development of trimaran hull form(LOA=17m, LBP=14m(Side Hull=6m), GT=9.77ton, Light Weight=11.2 ton).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.490-494
• /
• 2008

본 연구에서는 상수도 배수관로의 내 외부적 특성에 따라 개별관로를 정의하는 방법을 연구대상 지역의 배수관로 파손 데이터베이스에 적용하여 비례위험모형을 구축하였다. 연구에 사용된 자료는 연구대상지역의 배수관로의 제원 및 파손시기를 포함하는 관로 파손데이터베이스, 관로매설지역의 급수인구 및 수압범위에 관한 자료를 포함하는 GRID 데이터베이스와 관로매설지역의 토지개발 정도에 관한 자료를 포함한다. 이러한 자료를 이용하여 관로를 순차적 파손경험에 따라 7개의 생존시간군(STG I $\sim$ VII)으로 구분하고 각 생존시간군에 대한 비례위험모형(Model I $\sim$ VII)을 구축하였다. 이러한 모형을 이용하여 관로의 파손횟수가 증가하는 동안 파손에 영향을 미치는 인자의 변화와 그 효과를 파악하였으며, 또한 추정된 공변수의 위험비율을 분석함으로써 관로의 제원 혹은 매설환경, 급수인구 등에 따른 위험률의 상대적인 변화를 분석하였다. 또한 비례 위험모형의 구축과정에서 관로의 파손에 영향을 미치는 공변수의 비례성 가정을 검토하여 시간종속형 공변수를 모형화하였으며, 모형의 이탈잔차(deviance residual)를 분석하여 모형의 적합성을 검토하였다. 본 연구에서 구축된 비례위험모형에 대해 Shoenfeld 잔차를 이용한 스코어 잔차의 변화(score process)를 검토한 결과, Model I 과 Model II 에 대해서는 공변수의 시간종속 효과가 발견되었다. Model I에 대해서는 관로재질과 급수인구의 영향이 시간에 따라 변하며 Model II에서는 급수인구의 영향만이 시간에 따라 변하는 것으로 나타났다. 한편 Model III $\sim$ Model VII 들에 대해서는 공변수의 영향이 시간에 따라 변하지 않는 것으로 나타났다. 각 생존시간군에 대해 관로재질, 토지개발정도, 관로길이 및 급수인구의 변화가 관로의 상대적 누수위험률에 미치는 영향을 상대위험률의 95% 신뢰구간을 고려하여 정량적으로 산정하였고, 시간 종속형 공변수로 모형화된 공변수는 시간에 따른 공변수 영향의 변화를 분석하였다. 순차적 파손사건에 대한 비례위험모형의 구축 결과 생존시간군(STG) I의 기저위험률은 매설 후 대략 450개월까지는 파손 위험률이 '0'에 가까우나 그 이후로 급격히 증가하다가 매설 후 약 700개월에 이르러서는 약간 감소하고 약 850개월 이후에는 다시 급격히 증가한다. STG II의 기저위험률은 첫 번째 파손 후 약 300개월이 되면 위험률이 급격히 증가하는 것으로 나타났다. STG III $\sim$ STG VII의 기저위험률은 이차함수의 형태를 띄며, 특히 STG V, STG VI 및 STG VII의 기저위험률은 욕조형 곡선(bathtub curve)의 형태를 가진다. 각 생존시간군의 기저생존함수의 생존확률 '0.5'에 해당하는 기저중간생존시간에 대한 분석으로부터 파손횟수가 많아질수록 순차적 파손사건 사이의 경과시간은 감소하는 것으로 나타났다. 이러한 기저생존시간에 대한 경향은 관로의 파손횟수가 많아질수록 관로의 일반적은 내구성은 감소하기 때문인 것으로 분석된다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.153-170
• /
• 2013

This study was conducted to analyze the thermal comfort in the urban neighborhood park and to obtain a plan for improvement of the thermal environment. First, in the result of the analysis of the distribution characteristics of the park's main thermal environment factors and differences among types of space, temperature, relative humidity, and wind speed did not show a clear difference spatially. However, the median radiant temperature showed great differences according to the openness of the space and the covering material. According to the evaluation of thermal comfort by types of space based on derived thermal environmental factors, the PMV value of the square was the highest at 4.39, the paths showed 2.58, greenery 1.90, and resting spaces 0.42. In the result of the PMV regression model established for the evaluation of the significance of these thermal environment factors that decide thermal comfort, it showed that the relative significance to the PMV was as follows in decreasing order: median radiant temperature(1.084), wind speed(-0.280), temperature(0.013), and relative humidity(-0.009). When conducting a scenario analysis on the areas with need for improvement in thermal environment, it was found that through reflectivity, color and the change in the physical properties of packing materials the thermal comfort felt by the body could be improved, and it is believed that through this the improvement plan can be established.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.351-357
• /
• 2014

In membrane covered stent, occlusion and fracture from membrane degradation by gastric acid sometimes occurred. Therefore, we investigated the physical properties of membrane covered stent according to its ingredient and concentration in gastric acid environment. Membrane covered stents consisted of silicone and polyurethane with 15%, 18%, 20% concentrations were used. After incubating stents in a condition of pH 1.2, we checked any changes at every 3 weeks for 18 weeks. The changes of membrane surface, radial expansion and recovery force of stent were investigated. Coating thickness increased proportionally to an increase in ingredient concentration. Surface was evenly coated with silicone compared to the case with polyurethane and its homogeneity was excellent in a high concentration. Degradation was much severe in the case of polyurethane. The radial force of silicone was higher than polyurethane, and the decrease of radial and recovery force was higher in the case of polyurethane. In conclusion, high concentration of silicone membrane was more stable than polyurethane in acid environment of in vitro study.