• Korea Information Processing Society Review
• /
• v.5 no.3
• /
• pp.56-62
• /
• 1998

단문 메시지 서비스(Short Message Service)는 짧은 길이의 텍스트 메시지를 이동 단문 단말들간에 전송하는 데이터 서비스이다. 이 서비스는 통화로를 직접적으로 이용하지 않으며 구현과 이용이 쉽고 다양한 부가서비스를 제공할 수 있다 본 논문에서는 단문메시지를 상용 CDMA 망에 구현한 예를 제시하고자 한다. 단문 메시지 센터를 도입하고 메시지 서버를 개발하였으며 기존 이동전화 망의 프로토콜을 단문 메시지 서비스를 위해서 개선하였다 이 프로토콜을 교환기와 이동가입자 위치등록기등의 CDMA 망에 적용하였다.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.116-121
• /
• 2020

In this study, a single-phase analysis of droplet slug with different contact angles was performed based on the visualization of experimental results. Droplet slug - flowing between gases in a hydrophobic mini channel - moves with a triple contact line without a gas liquid film on the wall. The results show that the rotational flow inside the droplet occurred; this was compared and verified with the results of two-phase analysis. The pressure field shows pressure rise at the front and rear ends. The effective length - the section that satisfies the laminar flow condition - became shorter as the droplet velocity increased. The Choi's correlation for the effective length agrees with this analysis results with a slight difference. This difference is judged as the difference in the contact angle of the slug model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.275-282
• /
• 2010

The effect of swirl flow on NOx in a nonpremixed turbulent hydrogen jet with coaxial air was studied. The swirl vane angle was varied from $30^{\circ}$ to $90^{\circ}$. The fuel jet air velocity and coaxial air velocity were varied in an attached flame region as $u_F=85{\sim}160m/s$ and $u_A=7{\sim}14m/s$. The objective of the current study was to analyze the characteristics of nitrous oxide emission in a swirl flow and to propose a new parameter for EINOx scaling. The experimental results show that EINOx decreases with the swirl vane angle and increased with flame length. Further, EINOx scaling factors can be determined by considering the effective diameter ($d_{F,eff}$) in a far field concept. The EINOx increased in proportion to the flame residence time (${\sim}{\tau_R}^{1/2.8}$) and the global strain rate (${\sim}{S_G}^{1/2.8}$).

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.2
• /
• pp.102-108
• /
• 1991

A field experiment with microplots(D.20cm, L. 85cm) was conducted to obtain quantitative information on the downward movement of nutrients applied to the soils by different amount of irrigation water. The microplots were installed by embedding PVC column(D. 20cm, L. 90cm) filled with sieved soils in the field. Urea, fused and superphosphate, and KCl were broadcasted over the soil in the microplots and surface layer was covered with lime-amended soils. Microplots were removed 1 week after water application and analysed for Cl, $NH_4$ and $NO_3-N$, Bray 1-P and exchangeable cations of Ca, Mg, and K in each segment. Effect of irrigation rate on the movement of these ions were evaluated with the mean downward movement(MDM) determined with nutrient concentration of each segment and the distance to the segment from the site fertilized. For the nutrient studied, MDM was linearly related to the amount of water applied. When one pore volume of water needed for 0.1 bar soil moisture tension was applied, MDM(cm), computed as the piston front of applied water advanced 10cm, was found to be in the order; Cl, 7.52>Inorganic N, 6.03> K, 3.50> Mg, 2.69>Ca, 1.19>P, 0.29. After the downward movement of applied nutrients soil pH seemed to decrease with irrigation in the surface layer(0-15cm) and increase in the subsurface layer. It was also found that ammonium-nitrogen evolved from urea hydrolysis was more effective in raising the subsoil pH rather than the exchangeable Ca and Mg.

• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.369-375
• /
• 2006

Calibration gas mixtures were prepared using dynamic volumetric method according to ISO 6145-5 and the uncertainty was evaluated. Ten identical capillaries with 0.25 mm in inner diameter and 50 cm in length were applied in this system. Dilution ratio of parent gas was determined by the number of capillaries that passes parent gas and that passes balance gas through. Capillaries were made of Teflon which had good chemical stability against adsorption of gaseous substances. Mechanical valves were introduced in this system in order to minimize the thermal effect of solenoid valves. Concentration of prepared gases were compared with master grade standard gases in cylinders made by RiGAS Co. and calibration of the instrument were completed using comparison method according to ISO 6143. Experimental results showed that the coefficient of variance of diluted oxygen standard gases showed less then 0.2% in most dilution range, that of diluted hydrogen sulfide standard gases showed less then 1.0%. Therefore, it is proven that the standard gases prepared by this system are appropriate to be used as a calibration standards in ambient monitoring, etc.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.30-39
• /
• 2016

An experimental study was performed to investigate flexural performance and bond characteristics of RC beams strengthened using ductile polyethylene terephthalate(PET) with low elastic modulus. Bond tests were planned and completed following CSA S806. Test variables were fiber type and fiber amount. Also, total of 8 RC beams was tested. Major test variables of the beam tests included section ductility(${\mu}=3.4$, 7.0), fiber type(CF, GF, PET) and amount of fiber strengthening. Moment-curvature analyses of the beam sections were also performed. In bond tests, the bond stress distribution as well as the maximum bond stress increased with increasing amount of PET. In case of 10 layers of PET, the effective bond length was 60 mm with the maximum and the average bond stress of 2.33 and 2.10 MPa, respectively. RC beam test results revealed that the moment capacity of the RC beams strengthened using PET 10 and 20 layers increased over the control beam with little reduction in ductility by fiber strengthening. All beams strengthened using PET resulted in ductile flexural failure without any sign of fiber debonding or fiber rupture. It was important to include the mechanical properties of adhesive in the moment-curvature analysis of PET-strengthened beam sections.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.611-618
• /
• 2018

In this study, numerical analysis of solid-liquid two-phase flow was conducted as a preliminary step to analyze the flow characteristics of drilling fluid using the commercial CFD code, ANSYS CFX 14.5. The homogeneous model and separated flow model were used to simulate solid-liquid two-phase flow phenomena. In the separated flow model, Gidaspow's drag force model was applied with the kinetic theory model was applied for solid particles. The validity of the numerical model used in this study was verified based on the published experimental results. Numerical analysis was carried out for volume fractions of 0.1 to 0.5 and velocities of 1 to 5 m/s in a horizontal tube with a diameter of 54.9 mm and a length of 3 m. The Pressure drop and volume fraction distribution of solid particles were confirmed. The pressure drop was predicted using the homogeneous model and separated flow model within the MAE of 17.04 % and 8.98 %, respectively. A high volume fraction was observed in the lower part of the tube, and the volume fraction decreased toward the upper part. As velocity increased, variations in volume fraction distribution at varying heights were decreased, and the numerical results predicted these flow characteristics well.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.52-57
• /
• 2015

The focal spot of electron beam depending on the anode angle in the structure and major parts of the X-ray tube was investigated by the OPERA-3D/SCALAR simulation program. The simulation worked on four spaces with with two spaces, including anode and cathode of X-ray tube, by applying the finite element method analysis. The analytical model and dimension for the emission orbit of thermal electrons made from one filament of the focused X-ray cathode is affected to the penumbra of detector for the X-ray depending on any real focal spot size. The model shape of focusing cap and focusing tube with an anode target angle and a cathode filament is analyzed by the current density distribution of thermal electrons. The focusing width of thermal electrons for the X-ray tube depended on the anode angle (${\theta}$). The focusing value of electron beams at a region of anode angle having $10^{\circ}{\sim}17^{\circ}$ maintained to below value of $70{\mu}m$. The minimum focal size of the electron beam was $40{\mu}m$ at an anode angle of $15^{\circ}$. The focused X-ray tube of many variables depended on the thermionic emission of hot electrons from the target trajectory. The focusing tube will contribute to the real design of X-ray for the development of future diagnosis medical device.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.23-29
• /
• 1989

In order to investigate developmental habit and morphology of maize tillers, time and location of tiller development. number of tillers per plant, tiller angle, height and diameter of tillers and root systems of tillers were examined under field condition for maize with tillers. Materials used were mostly from Korean local lines and a few lines from other countries were also included for comparison. The time of the first tiller development was about 18 to 20 days after emergence when planted on May in Yusong. The second tiller appeared about 4 to 5 days after the first tiller appeared. The tiller number per plant varied with lines and hybrids and ranged from two to ten. The location of tiller development was usually basal nodes of the main stem. Each tiller appeared to have its own root system. The angle between tillers and main stem was variable depending upon the maizes and the tiller angle could be classified into three categories. The height of tillers was also variable and seemed to be under genetic control. The most productive tillers were found among the Korean local derivatives.

• Applied Microscopy
• /
• v.38 no.2
• /
• pp.81-87
• /
• 2008

Alkaline reduced water (ARW) has been used for drinking widely in several countries of Asia. The safety and clinical effects of ARW has been reported including anti-oxidative effect and intestinal abnormal fermentation. To confirm the effect of ARW on DSS-induced acute inflammatory bowel disease (IBD) mouse model, we observed the length of total large intestine and the histopathological changes after supplying mineral induced-ARW (MARW) for 2 weeks and oral administration of 4% DSS (dextran sulfate sodium). As the result, the length of total large intestine and the disease scores by macro and microscopical access in the ARWsupplied group showed no significant differences compared with those in the control group. This result suggests that the supply of ARW for 2 weeks exerted no effect on amelioration in the DSS-induced acute IBD model. However, in consideration of the effect of ARW on the improvement of intestinal environment and gastrointestinal disease, this result seems that acute IBD animal model is not suitable or the period of ARW supply is not enough to prove the effect of ARW. The ameliorative effect of ARW on the intestinal abnormal fermentation has been confirmed by some researchers, but the precise mechanism also remain unclear. In conclusion, although MARW had no effect on the DSS-induced acute experimental colitis model, further studies on the verification of the effects of ARW by using other intestinal disease model and by long-term supply of ARW will be required. Also, It needs to clear the mechanism of ARW on the intestinal environment.