• Title/Summary/Keyword: 관 길이

Search Result 807, Processing Time 0.034 seconds

Prediction of adiabatic capillary tube length of a vehicle heat pump using carbon dioxide (수송기계 $CO_2$ 히트펌프용 단열 모세관 길이 예측에 관한 연구)

  • Oh, Hoo-Kyu;Choi, Kwang-Hwan;Son, Chang-Hyo;Jeon, Min-Ju
    • Proceedings of the Korean Society of Marine Engineers Conference
    • /
    • 2011.06a
    • /
    • pp.277-277
    • /
    • 2011
  • 본 논문은 $CO_2$ 히트펌프용 모세관의 기초 설계자료를 제공하기 위해서 모세관 길이 예측에 대해서 이론 및 실험적으로 조사하였다. 본 연구에서 고려된 작동변수로는 증발온도, 가스냉각기 냉각압력, 냉매유량, 모세관의 관경 등이다. 몇몇연구자들의 자료를 바탕으로 $CO_2$ 모세관 길이를 예측할 수 있는 수학적 모델식을 작성하였다. 그리고 단열 모세관 팽창장치내 $CO_2$의 증발온도, 냉매유량, 냉각압력 등에 대해서 실험한 결과, Fig. 1에 나타낸 것처럼, 모세관 길이가 증가할수록 증발온도는 감소하는 것을 알 수 있다. 그리고 증발온도에 대한 실험값과 예측값의 비교 결과, 실험값이 예측값보다 약간 높게 나타났다. $CO_2$냉매가 모세관내를 통과할 때 플래쉬 가스(flash gas)의 발생으로 인해 액상의 양보다 기상의 양이 많아지고 액상의 압력강하보다 기상의 압력강하가 휠씬 더 크기 때문이다. 또한 증발온도에 대한 실험값과 예측값은 6.5~9.9% 이내에서 좋은 일치를 보였다. Fig. 2에 나타낸 것처럼, 모세관 길이가 증가할수록 냉매유량은 감소하는 것을 알 수 있다. 이는 전술한 바와 같이 모세관 길이가 증가할수록 냉매 압력강하가 더욱더 증가하기 때문이다. 그리고 냉매유량에 대한 실험값과 예측값의 비교 결과, 실험값이 예측값보다 약간 높게 나타났다. 이는 전술한 증발온도와 동일한 이유로 실제 $CO_2$냉매가 모세관내를 통과할 때 플래쉬 가스의 발생량이 많아지기 때문이다. 또한 냉매유량에 대한 실험값과 예측값은 0.64~10.9% 이내에서 좋은 일치를 보였다. Fig. 3에 나타낸 것처럼, 모세관 길이가 증가할수록 냉각압력은 증가하는 것을 알 수 있다. 이는 증발온도가 일정한 경우 모세관 길이가 증가할수록 냉매유량이 감소하여 압축기 토출측 온도(압력)가 상승하기 때문이다. 그리고 냉각압력에 대한 실험값과 예측값의 비교 결과, 실험값이 예측값보다 약간 낮게 나타났으며 실험값과 예측값은 1.04~3.7% 이내에서 좋은 일치를 보였다. 따라서 본 연구에서는 수송기계용 $CO_2$ 열펌프 단열 모세관에 대한 기초설계 자료로서, 냉각압력, 증발온도, 모세관 직경, 냉매유량 등의 조건으로부터 모세관 길이를 계산해낼 수 있는 예측 상관식을 제안하였다.

  • PDF

Study on the Variations of Inter-annual Tracheid Length for Korean Red Pine from Sokwang-ri in Uljin (경상북도 울진군 소광리 소나무의 가도관 길이 변이 분석)

  • Seo, Jeong-Wook;Eom, Chang-Deuk;Park, So-Yeon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.42 no.6
    • /
    • pp.646-652
    • /
    • 2014
  • This study was carried out to test the possibility that tracheid length of red pine growing in Sokwang-ri in Uljin could be used as one of variables to estimate its wood properties. For the study, forest stands of V (500 m a.s.l.) and VIIII (900 m a.s.l.) age class plots were selected in the region, and three trees in each plot were investigated. The tracheid length was separately measured for early- and latewood. It took approximately 25 and 40 years for V and VIIII age class stands, respectively, until the length was stabilized. The lengths in latewood were 3.14 (V age class) and 3.30 (VIIII age class) mm, and in earlywood 2.98 (V age class) and 3.15 (VIIII age class) mm. The lengths in latewood therefore were longer than in earlywood and the lengths for VIIII age class were longer than for V age class. However, the ratio between their lengths in early- and latewood was the same as 0.96 in all age classes. It might be verified whether this ratio can be used as a variable to test the wood property according to provinces by comparing it with others.

레이놀즈수 변화에 따른 대기압 플라즈마 제트의 방전 특성 변화

  • Kim, Yun-Jung;Jin, Se-Hwan;No, Jun-Hyeong;Song, Seo-Jin;Lee, Ye-Gwon;Choe, Min-Seong;Kim, Hui-Ju;Gwon, Gi-Cheong;Jo, Gwang-Seop
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.240.1-240.1
    • /
    • 2014
  • 대기압 플라즈마 제트 장치에 주입되는 기체의 유량 변화에 따른 방전 특성을 유체역학적으로 해석하였다. 장치에 주입되는 기체의 유량 변화는 레이놀즈수에 의한 유체 흐름의 상태 변화와 베르누이 정리에 의한 압력 변화를 동반한다. 유리관에 주입되는 기체의 레이놀즈수가 Re<2000이면 층류이며 Re>4000이면 난류, 2000

  • PDF

Elongation of the Ovipositor in Korean Rose Bitterling, Rhodeus uyekii (Pisces: Cyprinidae) (각시붕어, Rhodeus uyekii (Pisces: Cyprinidae)의 산란관의 신장)

  • Chae, Byung-Soo
    • Korean Journal of Ichthyology
    • /
    • v.13 no.2
    • /
    • pp.111-116
    • /
    • 2001
  • Factors influencing elongation of the ovipositor in the bitterling Rhodeus uyekii were examined under several conditions. The ovipositors of the females were periodically elongated under the presence of mussels or males, and in some cases without either. When females were reared without mussels and males, the ovipositor did not elongate in one fish in a large aquarium, but it did become elongated in another fish in a small aquarium and in many fishes in a large aquarium. Duration of the elongated state of the ovipositor was 1~3 days (mean 1.2~2.5 days) and the periodicity of elongation was 4~15 days (mean 6.4~11.9 days). Length of the elongated ovipositor was 68~100% (mean 78.5~98.8%). Length of ovipositor in the interpeak period was 20~51% (mean 27.3~33.1%); in the post-elongation period it did not elongated further 3~30% (mean 11.1~19.9%). The effect of aquarium size and number of individuals in the aquarium on the elongation of the ovipositor, and inter-specific or inter-generic differences based on previous reports are discussed.

  • PDF

Prediction of Adiabatic Capillary Tube Length of Heat Pump Using Carbon Dioxide (CO2 히트펌프용 단열 모세관 길이 예측에 관한 연구)

  • Oh, Hoo-Kyu;Choi, Kwang-Hwan;Jeon, Min-Ju;Son, Chang-Hyo
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.35 no.5
    • /
    • pp.576-581
    • /
    • 2011
  • In this paper, the prediction of adiabatic capillary tube of heat pump using carbon dioxide is investigated theoretically and experimentally to offer the basic design data for the operating parameters of this system. The operating parameters considered in this study include evaporation temperature, cooling pressure of gas cooler, mass flowrate, and the length and diameter of capillary tube. Based on study results of several researchers, the correlation predicting the length of capillary tube of $CO_2$ heat pump was proposed. And the experimental results of evaporation temperature, mass flowrate and cooling pressure in adiabatic capillary tube have an good agreement to those calculated from Eq. (3) within 0.63~10.9%. Therefore, the prediction calculating the length of adiabatic capillary tube of $CO_2$ heat pump was proposed at the given conditions such as cooling pressure, evaporation temperature and capillary tube diameter.

Characteristics of the Water Pressure Drop Considering Heat Transfer in the Evaporator and Condenser of a Water Chiller (냉수공장에서 열전달을 고려한 응축기와 증발기의 물 압력강하 특성)

  • Nguyen, Minh Phu;Lee, Geun-Sik
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.35 no.12
    • /
    • pp.1293-1300
    • /
    • 2011
  • The configurations of the evaporator and condenser of a water chiller can be determined from the trade-off between the heat transfer area, which is related to the capital cost and the pressure drop, which is associated with the operational cost. In this study, the design of the water chiller focused on minimizing the water pressure drop of both condenser and evaporator for given cooling capacity and requirements. Commercial enhanced tubes were employed to simulate real-life conditions. The results of the present analysis were compared with those obtained by HTRI software for verifying them. The results indicated that a reduction in the water pressure drop, which is associated with the short length of a tube, can be effected by decreasing the number of tube passes and increasing the number of tubes and the tube diameter. However, using a large number of tubes with smaller diameters can reduce the capital cost because the tubes are short. The reduction of the capital cost is due to the fact that a small-diameter tube has low internal thermal resistance and hence contributes to a decrease in the overall thermal resistance per unit length.

Structural analysis of joint part by adhesive length of a composite pressure vessel with separated dome (돔 분리형 연소관의 접착 길이에 따른 체결부의 구조해석)

  • Jeon, Kwang-Woo;Shin, Kwang-Bok;Hwang, Tea-Kyung
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2011.11a
    • /
    • pp.933-937
    • /
    • 2011
  • In order to determine optimal design length of adhesive joint of a composite pressure vessel with separated dome, stress analysis of joint part according to changes of adhesive length was done. Adhesive length has a range of 50mm to 300mm as design variables. The ratio of adhesive length with any stress gradient to initial non-stressed adhesive length was called "stress gradient length ratio" and selected as objective function. The stress gradient length ratio of joint part with adhesive length of more than 200mm was increased very slowly with increase of adhesive length. It means that adhesive length of about 200mm could be the optimal value to ensure the structural safety of joint part against internal pressure of 2,500 psi.

  • PDF

펄스 고전압을 이용한 해수모세관방전에서 고전압 펄스 방전특성 연구

  • Seok, Dong-Chan;Yu, Seung-Min;Hong, Eun-Jeong;No, Tae-Hyeop;Lee, Bong-Ju
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.248-248
    • /
    • 2011
  • 유전체 모세관을 이용한 해수에서의 펄스고전압 방전 특성을 연구하였다. 내경 1, 2, 3 mm의 구멍이 뚫린 Quartz 블럭에 외경 1, 2, 3 mm의 SUS 핀을 삽입하였고 삽입된 핀의 끝이 해수에 담구어 지도록 하여 고전압 방전을 발생 시켰다. 인가된 펄스 고전압은 5 kHz의 반복 주파수를 가지며, Pulse 폭을 $1{\sim}2.5{\mu}sec$까지 변화 시켜 전압전류 파형과 방전양상을 살펴 보았다. 방전은 펄스폭 변화에 따라 전해전도 전류에 의한 모세관 가열, 모세관내 미세기포형성, 기포내의 코로나 방전 개시 그리고 글로우 또는 아크방전으로 발전하는 것을 확인하였다. 모세관의 길이는 각각의 구경에 대하여 5 mm, 10 mm 두 가지로 변화하여 실험하였고, 모세관 길이 10 mm 조건에서는 방전이 매우 불안정 하였다. 각각의 방전조건별로 1~5분간 방전을 진행하여 해수내의 유리염소의 농도 변화를 살펴본 결과 방전모드가 글로우 또는 아크 방전 모드에서 단위 에너지당 유리염소 발생 수율이 큰 폭으로 증가하는 것을 확인할 수 있었다.

  • PDF

핵연료 탈피복 방안 연구

  • 김봉구;이정원;양명승;박현수
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05c
    • /
    • pp.207-212
    • /
    • 1996
  • DUPIC 핵연료 제조를 위해서 PWR 사용후핵연료의 피복관과 소결체를 분리하는 방법이 검토되었다. 약 50 cm의 PWR 사용후핵연료의 길이방향에 일정한 간격으로 구멍을 뚫어 산화하는 방법, 10∼20 m의 길이로 핵연료봉을 절단하여 산화하는 방법, 그리고, 핵연료봉의 길이 방향에서 피복관을 slitting하여 산화하는 방법에 대해 실험을 수행하였다. 실험 결과들로 보아 DUPTC 핵연료 제조 공정에 가장 적합한 방법으로는 핵연료봉 길이방향으로 slitting하여 산화하는 것이 가장 타당한 것으로 판명되었다.

  • PDF