• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.47-56
• /
• 2005

In GPS/INS/barometer navigation system for UAV, vertical channel damping loop was introduced to suppress divergence of the vertical axis error of INS, which could be reduced to the level of accuracy of pressure altitude measured by a pitot-static tube. Because static pressure measured by the pitot-static tube depends on the speed and attitude of the vehicle, static pressure error models, based on aerodynamic data from wind tunnel test, CFD analysis, and flight test, were applied to reduce the error of pressure altitude. Through flight tests and sensitivity analyses, the error model using the ratio of differential pressure and static pressure turned out to be superior to the model using only differential pressure, especially in case of high altitude flight. Both models were proposed to compensate the effect of vehicle speed change and used differential and static pressure which could be obtained directly from the output of pressure transducer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.566-568
• /
• 2013

Recently, the government as part of the creation of science for science education policies promoting the activation of the Science Museum. However the lack of infrastructure, budget and human resources are a reality that a lot of difficulties. In past, A field trip of Science Museum was a place of curiosity of youth. However, modern Science Museum has to competition with the online games and theme park in order to achieve the two goals of scientific experience and education, which it needs change display device is required. Looking at the cases of advanced foreign Science Museum is not merely a head of science education experience as a cultural space, provide relaxation and entertainment, and life science area in addition to a variety of genres such as art and fashion exhibits are planning to combine. In this study, the current uniform description panel of exhibition device described in the written text replaced with the digilog book with the age and grade of the visitors by providing a tailored service for scientific knowledge and intellectual curiosity induced measures can claim the satisfaction of visitors is proposed.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1000-1007
• /
• 2001

In an evacuated tube solar collector, the stable sealing of the heat pipe to the glass tube is important for the collector to use for a long period of time. The sealing of copper tube to the glass is quite difficult because of the large differences in the physical and chemical properties of the two materials. In this study, therefore, a proper copper oxide layer was induced to improve the chemical bonding of the two materials, and the oxidation state of copper and the interface between copper and glass were examined by XRD, SEM and EDS. Its bonding strength was also measured. Cu$_2$O was formed when the bare copper was heat-treated under 600$^{\circ}C$, while CuO oxide layer was formed above that temperature. The bonding state of CuO to the copper was very poor. The borate treatment of the copper, however, extend the stable forming of Cu$_2$O layer to 800$^{\circ}C$. Borosilicate glass tube was sealed to a copper tube by Housekeeper method only when the sealing part was covered with Cu$_2$O layer. The bonding strength at the interface was measured 354.4N, its thermal shock resistance was acceptable.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.481-486
• /
• 2008

The different degrees of blackening were observed at the inner surface of borosilicate, soda-lime, and aluminosilicate glass tubes having different sodium (Na) contents. The sodium contents ($Na_2O$) within the borosilicate, soda-lime, and aluminosilicate glass tubes were found to be 4%, 14%, and 0.06%, respectively. The degree of blackening was shown to increase as the sodium content within the glass of the fluorescent lamp containing Ne+Ar+Hg gas mixture. Higher degree of blackening was observed from the inner surface of the glass tube coated with $Y_2O_3$. The blackening was found to be originated from the amalgam of $NaHg_2$ generated by the chemical reaction between the mercury ions within the discharge gas and sodium within the glass tube during operation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.11-20
• /
• 2002

This paper describes the magnetic flux leakage(MFL) type non-destructive testing(NDT) system to detect the 3D defects on underground gas pipe. Magnetic systems with permanent magnets and yokes are analyzed by 3D non-lineal finite element method(FEM) with optimum design. In case of under-saturation of gas pipe, sensing signals are too weak to detect. In case of over-saturation, the changes of the sensing signals are too low to detect the defects sensitively. So, the operating points of the magnetic system are optimized to increase the changes of the MFL signals. The effects of the depth and size of the defects on the sensing signals are analyzed to define the range and resolution of the MFL sensors. To increase the sensor's sensitivity, the back-yoke sensors are introduced and tested.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.45-50
• /
• 1997

I본 논문은 저압 수은-아르곤 기체방전을 이용한 콤팩트 형광램프에 대한 모델링으로서 방전관 내 기체의 반경방향 입자밀도 변화를 고려한 입자평형식, 에너지보존식 및 회로방정식 등의 모델 방정식을 구성하여 이를 상용전원 구동회로와 결합한 13[W] PL 콤팩트 형광램프에 적용하였다. 계산된 전류와 램프전압의 실효치 및 파형을 실험치와 비교하여 모델이 타당함을 보였다.

• 전기의세계
• /
• v.25 no.4
• /
• pp.28-31
• /
• 1976

Thyristor는 많은 전력기기와 결합되어 전기기기 전반의 양상을 크게 변화시키고 있다. 예를 들면 변압기의 불꽃없는 탭이나 회전기의 정류자에 대치되는 무정류자전동기와 그리고 개폐기, 차단기의 대용등을 생각할 수 있다. 전력변환장치로서는 (1)직류전력을 조정하는 목적으로 Thyristor를 일종의 스위치로써 직류전압을 단속시켜 직류평균전력을 제어하는 DC Chopper (2)교류전원에 두개의 Thyristor를 역병렬접속하여 교류전류의 통전기간을 위상제어에 의하여 교류를 제어하는 AC Chopper (3)직류를 교류로 변환하는 자여식 inverter등이 있다. 본 해설에서는 지면관계상 D.C Chopper방식에 대한 기본회로와 그의 이용만을 취급한다.

• Journal of the Korean Vacuum Society
• /
• v.4 no.4
• /
• pp.425-430
• /
• 1995

본 연구에서는 Marx Generator와 펄스 형성라인을 결합시켜 만든 VEBA(Versatile Electron Beam Accelerator)장치를 사용하여 아르곤 이온의 에너지를 식각 추적 방법을 써서 측정하였다. 이 장치에서 240kV, 30kA, 60ns의 전자빔이 발생되었다. 이 전자빔이 이극관을 통과하면서 이 때 주입된 아르곤 기체가 이온화되어 아르곤 이온이 얻어진다. 이렇게 형성된 이온은 가상적 음극에 의해 진공 전파관 속으로 가속되고 이를 전자빔과 분리한 후 알루미늄 박막으로 만든 식각 추적판을 때리도록 장치하였다. 이때 아르곤 이온이 뚫고 들어간 알루미늄 박막의 수로부터 이온의 에너지를 구하였다. 이렇게 얻어진 실험값은 이론값과 잘 일치하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2002.02a
• /
• pp.174-174
• /
• 2002

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.33-36
• /
• 2001

고흡수성 고분자는 이온성기를 가진 수용성 고분자에 부분적인 가교결합을 도입하여 일반적으로 카르복실기 이온 (-COO-)등과 같은 친수성기를 다량으로 지닌 3차원 망상구조를 지니는 수용성 고분자이다[1]. 여지껏 물을 흡수하는 목적으로 사용된 흡수소재는 면, pulp, sponge 등이 일반적으로 알려져 있다. 이들은 모세관 현상에 의해 물을 흡수하는 것으로 알려져 있으며, 이들 흡수 재료의 흡수능력은 자기 무게의 수백 배로부터 천 배까지의 물도 흡수하며 외압하에서도 잘 탈수되지 않는 고기능성 고분자이며 그 원리는 다음과 같다. (중략)