• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.34-34
• /
• 2011

PET/면, 나일론/PET, 나일론/면 등 다양한 복합섬유소재를 염색하기 위해서는 복합섬유소재를 구성하는 각각의 섬유소재에 따라 적합한 염료를 선정하고 그에 맞는 염색방법을 사용하여 진행되고 있다. 하지만 이런 경우 색상과 견뢰도 등의 물성을 맞추기 위한 복잡한 염색공정 및 긴 염색시간에 의한 생산비용 상승 등 여러 문제점이 있다. 이러한 문제점을 해결하기 위해 하나의 염료를 이용하여 다양한 섬유를 염색하는 방법에 대한 많은 연구가 이루어지고 있다. 새로운 염료합성의 경우 섬유와 결합할 수 있는 반응기를 분산염료구조에 도입하여 염색조건에 따라 다양한 섬유를 염색할 수 있는 universal dye의 개발에 초점이 맞추어져 있다. 반응성염료와 분산염료의 특성을 동시에 만족시키기 위한 일환으로서 염료의 분자 구조 내에 상기의 염료특성을 동시에 발휘하는 소위 "반응성 분산염료"의 개발이 이에 속한다. 본 연구의 목적은 화학구조가 다른 네 종류의 sulphatoethylsulphone기를 갖는 반응성분산염료들을 합성하고 이들의 나일론, PET, 면 및 교직물에 대한 염색성을 분석하는 것이다. 면 섬유에 대한 Dye 1~4의 염색온도에 따른 염색성을 살펴보면, 각 염료들의 염색성은 염색온도에 따라 큰 영향을 받고 있음을 알 수 있으며, Dye 1, 4는 염색온도가 높을수록 K/S 값이 증가하고 Dye 2, 3은 염색온도가 낮을수록 K/S 값이 증가함을 알 수 있다. Nylon에 대한 Dye 1의 염색속도는 pH 4 > pH 5 > pH 8 > pH 7 > pH 6의 순서로 나타나 pH 6에서의 염착 평형이 pH 4보다 40분 정도 늦게 도달하였다. 나일론과 PET의 동욕염색에 있어 Dye 1은 나일론의 경우 초기부터 빠른 흡착을 보이며 $100^{\circ}C$가 되는 60분에는 K/S값이 16에 도달하여 염착 평형에 근접한 것을 알 수 있으며, PET는 $100-200^{\circ}C$ 사이에서 염색속도가 빨라지며 본격적으로 흡수하였다. N/C 교직물에 대한 Dye 2, 3의 빌드업성은 두 염료 모두 염료농도의 증가에 따라 K/S 값 역시 선형적으로 증가하는 것으로 나타났다. 나일론 섬유는 네 가지 염료로 우수하게 염색되었고, 면 섬유는 수용성기를 가진 Dye 2와 3, 그리고 PET 섬유는 소수성이 높은 Dye 1과 4가 적합하였다. N/P 및 N/C 교직물의 염색에 있어 나일론 성분으로 염료가 더 많이 흡착하여 나일론섬유가 더 진하게 염색되지만 교직물의 직물조직에 의하여 표면과 이면은 각각 거의 동색으로 보였다.

• Journal of the Korean Institute of Gas
• /
• v.11 no.1 s.34
• /
• pp.23-28
• /
• 2007

This paper presents an experimental investigation on the sealing defects and cracks of O-rings and a valve packing of a gas valve for a LPG cylinder. O-ring in which stops a gas leakage of a liquefied petroleum gas is very important for a LPG valve safety. Valve packing is to open and close a gas flow port for supplying and charging a LPG fuel. The sealing performance of two sealing units ism related to the leak safety and long lift of a gas valve. The investigated results show that most of O-rings was failed due to a circumferential crack in which is caused by partial press bonding failure near the partition zone and an excess compression rate. Some of the O-ring failure was originated by an extrusion of an excessive leak pressure of a LP gas. Thus, this paper strongly recommends a tight quality control and a safety guarantee system of O-rings and valve packing to guarantee a leak safety and to extend a service lift of a gas valve. At the end, a warranty policy of the sealing units should be adopted for increasing a product quality and safety of a gas valve.

• The KIPS Transactions:PartA
• /
• v.14A no.2
• /
• pp.77-84
• /
• 2007

The intima media thickness(IMT) of the carotid artery from B mode ultrasound images has recently been proposed as the most useful index of individual atherosclerosis and can be used to predict major cardiovascular events. Ultrasonic measurements of the IMT are conventionally obtained by manually tracing interfaces between tissue layers. The drawbacks of this method are the inter and intra observer variability and its inefficiency. In this paper, we present a multiresolution snake method combined with the dynamic programming, which overcomes the various noises and sensitivity to initialization of conventional snake. First, an image pyramid is constructed using the Gaussian pyramid that maintains global edge information with smoothing in the images, and then the boundaries are automatically detected in the lowest resolution level by minimizing a cost function based on dynamic programming. The cost function includes cost terms which are representing image features and geometrical continuity of the vessel interfaces. Since the detected boundaries are selected as initial contour of the snake for the next level, this automated approach solves the problem of the initialization. Moreover, the proposed snake improves the problem of converging th the local minima by defining the external energy based on multiple image features. In this paper, our method has been validated by computing the correlation between manual and automatic measurements. This automated detection method has obtained more accurate and reproducible results than conventional edge detection by considering multiple image features.

• Applied Microscopy
• /
• v.30 no.1
• /
• pp.73-80
• /
• 2000

Di-(2-ethylhexyl)phthalate (DEHP) has been known as one of endocrine disruptors. The present study was carried out to investigate the alterations of fine structure in rat seminal vesicle after oral intubation of DEHP in dosages of 1g/kg/day, 2g/kg/day or 3g/kg/day respectively in 0.5 ml of corn oil for If days. In rats treated with DEHP for 15 days, seminal vesicle exhibited extensive histological alterations compared to those observed in control groups. The size of the seminal vesicle and the mucosal folds decreased, but the lamina propria was considerably thickened. The ultrastructural changes of epithelial cells in seminal vesicle of rat treated with DEHP were characterized by the high nuclear/cytoplasmic ratio and the increased beterochromatin within irregular nuclear envelope. And also, the rough endoplasmic reticulum, Golgi complex and secretory vesicles were poorly developed. In conclusion, DEHP caused the ultrastructural and functional alterations of seminal vesicle in rats dose-dependently. It is suggested that these detrimental effects of DEHP on seminal vesicle are derived from the decrease level of testosterone.

• The Journal of the Korea Contents Association
• /
• v.14 no.8
• /
• pp.122-129
• /
• 2014

The idea of global cities were widespread in the 20th century, but now in the 21st century the paradigm has changed into creative cities. They are trying to develop the creative contents in which economy and culture are connected to promote their global competitiveness. This thesis focuses on the three main points represented in the projects of publishing journals of Namyangju city. Firstly, the project held 'community-based lectures of humanities,' and 'literary contest' to induce participation of the citizens. The results of the events, however, were not successful because of the narrow extent of creative groups of the city and not enough campaign of the city. Secondly, there was the education of citizens to promote their participation, as they are so much the main parts of publishing journals that theory and practice of reporting on their own is essential. Thirdly, the project committee established citizen publishing committee and encouraged them to do their parts at each department. As a result, citizens succeeded in building cultural infrastructure for shaping the creative city and had the initiative to publish journals about masters, masterpieces, and attractions in Namyangju city. The city and the citizens should practice the culture contents projects in both sides' cooperation.

• KIISE Transactions on Computing Practices
• /
• v.23 no.5
• /
• pp.284-292
• /
• 2017

With the development of Internet of Things (IoT) technology, the combination of ICT and medical services has been increasing to improve the quality of medical services. Using the IoTs, we can collect personal health information continuously in a patient's everyday life. We expect that this will improve the quality of medical service through analysis. However, the problem of ensuring the protection of personal information within the personal health information has been hampering the research, development, and application of such services. Other problems include lack of IoT devices and lack of user convenience for collecting health information about a patient's everyday life. Therefore, in this study, we construct a daily health information management service that can collect the health related information at any time and store this data in personal storage. This data is then only provided to the healthcare worker when necessary. We built a test bed for an IoT-based smart home platform and are currently conducting user experiments. Based on the results of this study, we are attempting to provide a high quality medical trial service based on daily health information through linkage with medical device manufacturers, medical clinics, insurance companies, etc. We expect the proposed health information management service will contribute to the revitalization of smart health care services via activating various health related IoT devices and analyzing daily health information.

• Journal of Korean Medical classics
• /
• v.13 no.2 s.17
• /
• pp.58-67
• /
• 2000

통과대문왕팔괘차서도화문왕팔괘방위도적연구(通過對文王八卦次序圖和文王八卦方位圖的硏究). 득도요여하결론(得到了如下結論). 1. 최초명명위문왕팔괘차서도화문왕팔괘방위도적인시소옹(最初命名爲文王八卦次序圖和文王八卦方位圖的人是邵雍). 문왕팔괘차서도화문왕팔괘방위도수연몰유시문왕소화적확체적근거(文王八卦次序圖和文王八卦方位圖雖然沒有是文王所畵的確切的根據), 단시종추연복희이(但是從推演伏羲易), 동사상결합(同事相結合), 최종확립여금적역학체계적인시문왕(最終確立如今的易學體系的人是文王). 이차환부합현금적역리(而且還符合現今的易理), 인차구유일정설복력(因此具有一定說服力). 2. 재문왕팔괘차서도중삼남유일양이음구성(在文王八卦次序圖中三男由一陽二陰構成). 삼녀유일음이양구성(三女由一陰二陽構成). 저가이용음양호근적원리진행설명(這可以用陰陽互根的原理進行說明). 3. 복희팔괘방위도현시모종공간상(伏羲八卦方位圖顯示某種空間相). 이문왕팔괘방위도칙현시사시(而文王八卦方位圖則顯示四時). 팔절적변화화만물생장적류행주기등시간상적변화(八節的變化和萬物生長的流行周期等時間上的變化). 4. 문왕팔괘방위도동사시적오행상일치(文王八卦方位圖同四時的五行相一致). 시상생관계(是相生關係), 팔괘당중각유양개목김토(八卦當中各有兩개木金土). 시유우형흔왕성(是由于形흔旺盛), 수화각유일개시유우기흔왕성(水火各有一개是由于氣흔旺盛). 5. 문왕팔괘방위도재표면상간호상시오행상생적관계(文王八卦方位圖在表面上看好象是五行相生的關係). 단시(但是), 상호성대면적팔괘적오행도성상극관계(相互成對面的八卦的五行都成相剋關係). 화동측상임적감수(和東側相臨的坎水) 간토(艮土) 진목(震木) 손목도시성상극관계(孫木都是成相剋關係). 종차가이지도상극시발전만물적주체(從此可以知道相剋是發展萬物的主體). 6. 대우복희팔괘전화위문왕팔괘적원리(對于伏羲八卦轉化爲文王八卦的原理), 수유각종이론제출(雖有各種理論提出). 단시상무확체적설법(但是尙無確切的說法). 7. 복희팔괘주요체현천도화외상등(伏羲八卦主要體現天道和外象等), 문왕팔괘측체현인사화내정등(文王八卦側體現人事和內情等). 8. 복희팔괘위체(伏羲八卦爲體), 문왕팔괘위용(文王八卦爲用). 복희팔괘중(伏羲八卦中), 위변화적주체적천지즉건곤위우중축(爲變化的主體的天地卽乾坤位于中軸). 문왕팔괘중(文王八卦中), 위변화적대용적일월즉감리위우중축(位變化的大用的日月卽坎離位于中軸). 9. 복희팔괘도속우표현춘천적변화지상적제일괘도(伏羲八卦圖屬于表現春天的變化之象的第一掛圖), 생괘도화창조도(生掛圖和倉曹圖), 문왕팔괘도칙속우표현하천적변화지상적제이괘도(文王八卦圖則屬于表現夏天的變化之象的第二掛圖), 장괘도화발전도(長掛圖和發展圖). 10. 문왕팔괘도시류행이치기용적역지용(文王八卦圖是流行以致其用的易之用), 표현무질서화혼란(表現無秩序和混亂), 위화여괴리상호란무적난음난양지상(韋和與乖離相互亂舞的亂陰亂陽之象). 11. 문왕팔괘도화낙서적변화원리상일치(文王八卦圖和洛書的變化原理相一致), 가이장낙서적수직접대응도문왕팔괘도중(可以將洛書的數直接對應到文王八卦圖中). 우명낙서팔괘도(又名洛書八卦圖). 구수도혹일구역(九數圖或一九易). 12. 문왕팔괘도적상대응적수자지합도위십(文王八卦圖的相對應的數字之合都爲十). 저예시료성괘도십수도적출현(這豫示了成掛圖十數圖的出現).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1255-1262
• /
• 2012

Look into the nuclear power plant of Wolsong currently, it is controlled in order to required operating pressure with PI controller. PI controller has a simple structure and satisfy design requirements to gain setting. However, It is difficult to control without changing the gain from produce changes in parameters such as loss of the valves and the pipes. To solve these problems, the dynamic change of the PI controller gain, or to compensate for the PI controller output is desirable to configure the controller. The aim of this research and development in the parameter variations can be controlled to a stable controller design which is reduced an error and a vibration. Proposed PI/NN control techniques is the PI controller and the neural network controller that combines a parallel and the neural network controller part is compensated output of the controller for changes in the parameters were designed to be robust. To directly evaluate the controller performance can be difficult to test in real processes to reflect the characteristics of the process. Therefore, we develope the simulator model using the real process data and simulation results when compared with the simulated process characteristics that showed changes in the parameters. As a result the PI/NN controller error and was confirmed to reduce vibrations.

• The Korean Journal of Physiology
• /
• v.23 no.1
• /
• pp.89-98
• /
• 1989

In order to produce antibody for use in radioimmunoassay of gastrin in physiological concentration, four rabbits of New Zealand white were immunized with synthetic human gastrin-17-I conjugated to hemocyanin with EDC. Among them, only one rabbit produced antibody that could bind 50% of $^{125}I-gastrin$ at a final dilution of 1:25,000. $^{125}I-gastrin$ was prepared with synthetic human gastrin-17-I and $NaI^{125}$ by lactoperoxidase technique. The product was then purified on a column of Sephadex Gl5/G5O (7:3, w/w) followed by a column of DEAE sephadex A-25. The specific radioactivity of the purified $^{125}I-gastrin$ was in the range of 347-1429 ${\mu}Ci/nmole$ when determined by the self-displacement method. The effective affinity constant $(K_{eff})$, total binding sites (N), heterogeneity index $({\alpha})$ and average affinity constant $(K_{0})$ of the anti-gastrin serum calculated from Scatchard plot as well as Sips plot were $1.77{\times}10^{11}/M$, 255 nM, 0.84 and $0.79{\times}10^{11}/M$, respectively. When radioimmunoassay was performed with the anti-gastrin serum, it was confirmed that the mean concentration of gastrin immunoreactivity in plasma was increased by feeding in humans and rats, and also increased by bombesin administration in rats. The results indicate that the anti-gastrin serum produced in the present investigation is suitable for radioimmunological determination of gastrin in physiological concentration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.355-362
• /
• 2016

The pipe material is selected according to the physical and chemical properties of the fluid flowing within it. Because the fluid used in fire extinguish systems is water, the various foreign substances dissolved in it cause scale to form on the pipe wall and accelerate the corrosion and aging of the pipe itself. This results in an increase in the friction loss and eventually degrades the efficiency of the pump. The use of CPVC (Chlorinated Poly-Vinyl Chloride) pipes was confirmed to reduce the friction loss compared to conventional steel pipes in the design and construction stages. The friction loss was found to be 76.64MPa with a C-value of 120 for the steel pipe and 50.72 MPa with a C-value of 150 for the CPVC pipe in an actual apartment construction environment. It was confirmed that the friction loss was improved by about 34% when using the CPVC pipe. When the steel and CPVC pipes were employed in the construction, the construction costs were 1,585,158 and 931,842 won, respectively. Therefore, it was shown that the construction cost was reduced by about 41%. We investigated the safety of the fire extinguishing system and the improvement in the economic performance due to the reduction in the total installed capacity by studying practical applications in the field.