• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.419-425
• /
• 2005

산악지역을 관통하는 도로의 경우 그 특성상 절토 후 도로를 시공하는 경우가 자주 있으며 때로는 매우 긴 구간에 일조가 적게 나타나 음영이 오래 지속되는 곳이 발생한다. 본 연구는 GIS를 이용하여 도로의 노선계획시 예상되는 일조영향을 평가하여 정확한 데이터를 제공하고자 한다. 실험대상지역을 선정하고 수치지형자료의 변환을 통하여 3D 지형 메쉬데이터를 작성하고 동일좌표체계의 도로선형자료를 반영하여 정확한 도로모델링을 생성하므로써 도로의 각 지점별 일조영향분석을 위한 기초자료를 구축하였다. 또한 도로노면상의 음영시간을 계산하고 일영이 도로 전체에 어느 정도 유지되는지를 가시적으로 모델링화하여 계절별 시간대별로 도식화하므로써 판단자의 시각적 분석을 가능케 하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.155-160
• /
• 2004

Water jet trajectories and velocity deficits from a high pressurize nozzles were experimentally observed. In this article, several parameters affecting plugging and erosion onto the steam generator tube were quantitatively analyzed. Visualization, velocity distribution, and spray growth rate with different nozzle configurations have been mainly focused using a 2-D PDPA (Phase Doppler Particle Analyzer) system. The results indicated that trajectories along the centerline regardless of their momentum has its potential core region. However, the phenomena from the peripheral part need to be meticulosly considered. Accordingly, it is evident that quantitative velocity deficits at the outer region are outstanding due to the aerodynamical drag and entrainment.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.67-70
• /
• 2001

터널 굴착에 따른 연구지역내 지하수체의 거동 특성을 파악하기 위하여 터널 굴착시 그라우팅 이전의 초기 유출량과 초기 그라우팅 이후의 구간별 유출량을 측정하였고 단열구조와 비교, 분석하였다. 초기 유출량은 120,990 m$^3$/day이며, 초기 유출이 심했던 구간은 크게 6개 구간으로 세분할 수 있다. 초기 그라우팅 후 지하수 유출이 심했던 구간 역시, 그라우팅 이전과 마찬가지로 6개 구간으로 세분할 수 있다. 그라우팅 전, 후의 유출량을 비교해 보면 그라우팅후의 유출량은 42,844m$^3$/day으로, 그라우팅 전에 비해 많이 감소되었다. 터널 굴착시 터널내로 유출되는 지하수의 대부분은 터널과 직교 혹은 사교하여 관통하고 있는 단층 및 단층 파쇄대와 연장성이 양호한 절리면들을 따라서 유동되고 있다. 터널내의 지하수 유출에 영향을 미치는 단열들은 대체로 4조의 불연속면군으로 분류 할 수 있는데, 주 분포방향은 크게 TSet 1 : N60-85$^{\circ}$W, TSet 3 : N40-50$^{\circ}$E, TSet 3 : N10-20$^{\circ}$E, TSet 4 : N70-80$^{\circ}$E이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.42-42
• /
• 2010

Deep-trenched photonic crystals passing through InGaN/GaN quantum well structural layer have been fabricated on the surface of GaN-based light emitting diode(LED) using by electron beam nanolithography. The lattice constant and hole diameter of the photonic crystals are 230nm and 140nm, respectively. The structural and electro-optical properties have been investigated by scanning electron microscope(SEM) and power-current-voltage(L-I-V). Electroluminescence from GaN-based LED with deep-trenched photonic crystal shows the higher intensity than that without photonic crystal.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.83-84
• /
• 2010

Precast beam column joints with thru-connectors are developed from precedent study. The seismic performance is evaluated by experimental method. The test results of the precedent study showed that failure modes for all specimens were a compression failure by characteristics of unbonded tendon. Thus, variable considered in the research program for a tensile failure include the use of dog-boned longitudinal steel and concrete confined with steel spirals. The analysis of structural characteristics and evaluation of seismic performance of specimens was conducted by the experimental way. Comparison of result with the test specimens indicates that seismic performance is higher than the precedent study due to concrete confinement effect from steel spirals.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.779-782
• /
• 2003

The theoretical and experimental current-voltage characteristics of Erbium silicided n-type Schottky barrier tunneling transistors (SBTTs) are discussed. The theoretical drain current to drain voltage characteristics show good correspondence and the extracted Schottky barrier height is 0.24 eV. The experimentally manufactured n-type SBTTs with 60 nm gate lengths show typical transistor behaviors in drain current to drain voltage characteristics. The drain current on/off ratio is about 10$^{5}$ at low drain voltage regime in drain current to gate voltage characteristics.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2031-2036
• /
• 2003

High-pressurized jet is widely using in industrial works. however, few papers studied on the performances or characteristics on that kind of nozzles. And in this study, some flow characteristics with the variation of nozzle aspect ratios such as mean velocity distributions, momentum variations along the center line have been experimentally investigated. As the results, some semi-empirical correlations of profiles of pressure and mean velocity distributions, momentum conservations with the nozzle aspect ratios are formulated. It is expected that these empirical formula can be applied for the random estimations of nozzle performances.

• Journal of Sensor Science and Technology
• /
• v.6 no.2
• /
• pp.87-94
• /
• 1997

Impedance analysis of a Solenoid sensor to detect the cross-sectional area of non-ferromagnetic stranded conductors is described in this paper. To inspect electromagnetic characteristics of conductive materials, a nondestructive test eddy current sensor with an encircling coil is chosen. As solving Maxwell equation, normalized impedance response of the sensor within a conducting rod is modeled and the results are expanded to the stranded wires. Geometrical property affecting on stranded structure is considered and a numerical and experimental study is also presented.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.5
• /
• pp.545-552
• /
• 2004

The purpose of this study is to improve the prediction ability of the atomization and vaporization processes of GDI spray. Several models have been introduced and compared. The atomization process was modeled using hybrid breakup model that is composed of Linearized Instability Sheet Atomization (LISA) model and Aerodynamically Progressed TAB (APTAB) model. The vaporization process was modeled using Spalding model and Abramzon ＆ Sirignano model. Exciplex fluorescence method was used for comparing calculated with experimental results. The experiment and computation were performed at the ambient pressure of 0.1 MPa, 0.5 MPa and 1.0 MPa and the ambient temperature of 293k and 473k. Comparison of calculated and experimental spray characteristics was carried out and the calculated results of GDI spray showed good agreement with experimental results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.852-859
• /
• 2000

The emission in the exhaust gas from diesel engine is effected by the fuel spray characteristics. The spray of D.I. diesel engine impinges on a piston cavity and a cylinder wall. It is very important to know exactly the distribution and behavior of the spray inside cylinder. The objective of this study is to develop more accurate evaporation model. The EPISO code was used to analyze the flow characteristics in the engine. The Wakil model and the Faeth model are applied to the EPISO code to analyze the behavior of impinging spray. And also experimental and numerical analysis were carried out. The spray behavior characteristics were investigated by changing injection pressure, ambient pressure and temperature. The behavior of impinging spray was strongly effected by the change of ambient pressure and temperature. The effects of evaporation and rebounding droplet should be considered.