• Journal of Welding and Joining
• /
• v.24 no.2
• /
• pp.64-70
• /
• 2006

The 3-dimensional (3D) chip stacking technology is a leading technology to realize a high density and high performance system in package (SiP). There are several kinds of methods for chip stacking, but the stacking and interconnection through Cu filled through-hole via is considered to be one of the most advanced stacking technologies. Therefore, we studied the optimum process of through-hole via formation and Cu filling process for Si wafer stacking. Through-hole via was formed with DRIE (Deep Reactive ion Etching) and Cu filling was realized with the electroplating method. The optimized conditions for the via formation were RE coil power of 200 W, etch/passivation cycle time of 6.5 : 6 s and SF6 : C4F8 gas flow rate of 260 : 100 sccm. The reverse pulsed current of 1.5 A/dm2 was the most favorable condition for the Cu electroplating in the via. The Cu filled Si wafer was chemically and mechanically polished (CMP) for the following flip chip bumping technology.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.3
• /
• pp.101-109
• /
• 2003

The wavy extinction of quartz can be used as a standard indicator showing the degree of rock deformation. In determine the degree of rock deformation, the intensity of wavy extinction (IWE) of quartz was measured using polarizing microscope, digital camera, and NIH Image program. This method was applied to the granite of Pocheon-Gisanri area, which are divided three type; biotite granite (Gb), garnet biotite granite (Ggb) and two mica granite (Gtm). In this study, measurement of wavy extinction was proceeded Ggb in eastern part and Gb in western part based on the Pocheoneup. The result was that Gb shows low deformation degree below D2, and Ggb represents high deformation degree above D3, generally showing that increasing deformation degree from northwest to southeast in the studied area. It is suggested that the fault which penetrated Ggb in 1/250,000 geological map affected the deformation degree of Ggb.

• Journal of Chest Surgery
• /
• v.30 no.1
• /
• pp.77-82
• /
• 1997

Sixty children were admitted to he Department of Thoracic and Cardiovascular Surgery, Kyungpook National University Hospital for the treatment of thoracic injuries for about a 10year period ending in August, 1995. We reviewed the hospital records retrospectively, to see the characteristics of the scope and consequences of childhood chest injuries. Mean age was 9 years and forty-six cases(77%) were male. Fifty children(83%) were victims of a blunt trauma. Among the blunt trauma patients, more than 60% were traffic-related. All victims of penetrating trauma were male. Among the blunt trauma patients, rib fracture was the most frequently found (52%) followed by pneumothorax(42%), although significant intrathoracic injuries occurred without rib fractures in )2% of blunt trauma cases. Associated injuries were present in 42% of children reviewed. Most frequently performed surgical procedure was closed thoracostomy(45% ), and ten children required thoracotomy and fifteen needed assisted ventilation. Modified Injury Severi y Scale(MISS) score was measured in the multiple Injured group. MISS score correlated significantly with the length of stay In the intensive care unit. One child(1.7% ), involved in a traffic accident, died of sepsis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.667-672
• /
• 2016

This study presents results of an experimental investigation of the laser-arc, hybrid, butt welding process of SS400 structural steel. Welding parameters including laser power, welding current and speed were varied in order to obtain one-pass, full-penetration welds without defects. The conditions that resulted in optimal beads were identified. After welding, hardness measurements and microstructure observations were carried out in order to study weld properties. The mechanical properties of both the base material and welded specimen were compared based on the results of tensile strength measurements. The yield and tensile strengths were found to be similar.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.2
• /
• pp.59-67
• /
• 2018

Various pilotis are installed in the lower part of high rise buildings. Strong winds can generate sudden airflow around the pilotis, which can cause unexpected internal airflow changes and may cause damage to the exterior of the piloti ceiling. The present study investigates the characteristics of peak wind pressure coefficient for the design of piloti ceiling exteriors by conducting wind pressure tests on high rise buildings equipped with penetration-type and end-type pilotis in urban and suburban areas. The minimum peak wind pressure coefficient for penetration-type piloti ceilings ranges from -2.0 to -3.3. Minimum peak wind pressure coefficient in urban areas was 30% larger than in suburban areas. In end-type piloti ceilings, maximum peak wind-pressure coefficient ranges from 0.5 to 1.9, and minimum peak wind-pressure coefficient ranges from -1.3 to -3.6. With changes in building height, peak wind pressure coefficient decreases as the aspect ratio increases. Peak wind-pressure coefficient increases with taller pilotis. On the other hand, when piloti height decreases, the absolute value of the minimum peak wind pressure coefficient increases.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.146-152
• /
• 2009

The steel-tube is exposed to a radiation from X-ray source. The transmitted radiation is detected by a detector, usually film or more recently an imaging plate(IP) of Computed Radiography(CR). The detected radiation overlaps the region of both sides of the object. The radiographic images reflect the projections of the rays, passing twice through both external and internal tube material. Nonlinear distortion due to the radioactive transmission and geometric disposition also appears on images. In this paper, an analytical approach is presented to achieve image reconstruction from the steel-tube CR images. Parameters related to radiation and measuring structure, such as intensities, absorption in material and geometric specifications linked with the collimating components, are calculated and identified in order to construct the renoval images for twofold regions of circle-type steel tubes. A correction procedure for region recovery most similar to the true tube is designed. The application of this approach on CR images is shown and reconstructed results are discussed.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.119-126
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulation. During a few decades, the great effort has been made by International Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study is aimed at investigating a complicated structural response of bow structures of oil carriers for assessing the energy dissipation and crushing mechanics of striking vessel through a methodology of the numerical analysts for the various models and its design changes. Through this study an optimal bow construction absorbing great portion of kinetic energy in the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of response analysis procedures are performed as follows; 1). 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in two conditions. 2). 21 models conisted of 5 size of full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3). 36 models of 100k oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary mombers, framing system and colliding conditions, etc.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.169-174
• /
• 2011

Acoustic emission (AE) signals were detected and analyzed in real time during the polymerization shrinkage of composite resin restoration in an artificial dental ring with a class I cavity. Most AE hit events were observed in the initial curing period of the 1st region with high contraction rate. The range of the $2^{nd}$ region for the stainless steel specimen was shorter than that for the PMMA specimen but longer than that for the human dentin specimen. AE hit events showed a blast-type signal having an amplitude in the range of 25.45 dB and a frequency band of 100.200 kHz or 240.300 kHz. These values of amplitude and frequency indicated the fracture of resin or of the adhesive layer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.528-532
• /
• 2017

영산강은 우리나라에서 호남평야 다음으로 넓은 나주평야에 농업용수를 공급하는 남도의 젖줄이며 영산강 유역민의 약 70%가 거주하는 약 150만의 광주광역시를 관통하는 우리나라 4대강의 하나이다. 그러나 영산강은 그 위상에 맞지 않게 우리나라 하천 중 수질이 가장 악화되어 있는 하천 중 하나이다. 영산강의 수질은 최근 10여 년 동안에 이루어진 수질오염총량관리제의 제 1단계(2004~2010년), 제 2단계(2011~2015년) 사업과 2012년 10월 광주광역시의 총인처리시설의 정상 가동, 영산강의 수질을 2급수(좋은 물) 목표로 4대강 사업의 일환으로 갈수기 유지유량 공급을 위하여 14개 농업용저수지의 둑 높이기 사업 등 배출오염부하량의 삭감노력과 하천유지유량의 증대계획 등으로 많이 개선되어 왔으나, 1~2급수를 유지하는 3대강 수준에 크게 못 미치는 3~4급수의 수질을 유지하며 상대적인 수질악화와 그 격차가 크게 차이를 보이며 고착화되고 있다. 따라서 본 연구에서는 4대강 사업의 일환으로 숭상이 이뤄졌고, 영산강의 수질에 비해 상대적으로 청수인 영산강유역의 4대호 담양댐, 광주댐, 장성댐, 나주댐의 호소수를 영산강에 추가로 방류할 경우 수질이 개선되는 정도를 분석하여 제시하였다. 수질개선효과를 분석하기 위하여 QUAL-MEV모델을 이용하여 영산강 수질모델을 구축하였고, 목표연도 2020년을 설정하여 4대호 방류구의 현재의 지리적 위치와 4대호의 수질자료를 모델에 직접 입력하여 추가 방류량의 변화에 따라 수질개선효과를 분석하여 그 문제점을 제시하였으며, 4대호 댐별로 영산강의 수질개선 기여도를 분석하여 제시하였다.

• Cross-Cultural Studies
• /
• v.45
• /
• pp.145-166
• /
• 2016

The aim of this investigation was to determine the historical relationship between anti-communism in the United States and military dictatorship in Paraguay. Relations between the two countries have been of great importance since the U.S attempt to obtain hemispheric solidarity in World War II, the Cold War in Latin America, and the balance of power in the La Plata region. The Archives of Terror are official documents of police repression between Alfredo Stroessner's dictatorship and the U.S. U.S provided support and aid to Paraguay dictator. Alfredo Stroessner spanned more than half a century. The course of Paraguay-U.S. relation during his regime is illustrative of the flow of real politics in both nations. Not only did Washington had definite diplomatic goals, so did $Asunci{\acute{o}}n$. The relative disparity in power and wealth between the two nations did not necessarily hinder Paraguay's pursuit of international advantage in its relations with the United States.