• 기계와재료
• /
• 제23권3호
• /
• pp.138-146
• /
• 2011

자동차 차체 경량화를 위해 알루미늄 스페이스 프레임 구조가 개발되고 있으나, 관재결합이 필요하기 때문에 기존의 저항 점용접이 적용되기 어렵다. 또한, 멤버와 멤버의 연결부에서는 철강재난 고강도 재료의 사용이 요구되므로 이종재료 접합기술이 필요하다. 알루미늄 및 이종재료 접합방법으로는 볼트체결, 클린칭, SPR 접합, 접착재 등이 있으나, SPR 접합은 기계적인 결합방법의 하나로, 일반 리벳공정과는 달리 별도의 홀이 필요없기 때문에 자동화에 용이하며 작업시간도 빠르다. 리벳의 압입 방식으로 판재의 열변형이 거의 없고 친환경적인 공법으로 사용되고 있으며, 소음이 적고, 용접이 불가능한 이종재료의 결합도 가능하다. 무엇보다 자동차 양산용 장비 적용이 용이하기 때문에 기존의 저항 점용접을 대체하기 편리하다. 따라서, 본 글에서는 알루미늄 차체 부품 접합을 위한 SPR 접합공법에 대한 국내외 기술개발 동향을 분석하고, 한국기계연구원에서의 최근 기술개발 내용을 소개하고자 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.54-57
• /
• 2001

Hydroforming is core production techniques for the super light weight and high safety of the vehicle body. In order to establish and understand hydroforming, the tube hydroforming simulator which could control an axial compression and high internal pressure with computer operation was developed in tube bulging. This paper presents experimental investigation for process parameters, such as Internal pressure and axial compression. In addition, the mechanical properties, such as strain hardening and energy absorption ability of hydroformed part, is discussed.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.274-280
• /
• 2009

The purpose of this study was to identify the species of coffin woods excavated at Mundangdong in Gimcheon and to date this coffin by using tree-ring method. All coffin woods were identified as red pines, most possibly, Pinus densiflora S. et Z. Tree-ring dating provided absolute years of 3 among 19 coffins. Both I-9 and II-22 coffins were estimated to be made in the mid-seventeenth century, and I-65-1 in the mid-sixteenth century. Others possessed too few rings to be dated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.402-408
• /
• 2003

Currently tube hydroforming has many studies and applications in manufacturing industry, especially in automotive industry. But tube hydroforming was applied to the automotive component with simple shape. So the manufacturer and the researcher proposed additional processes to form the automotive component with complex shape. It is prebending and preforming. Prebending is to crush bend or rotary draw bend a tubular blank into a shape that facilitates placement into the next forming tool. Preforming is where the prebent tube is crushed into a shape that facilitates placement into the final forming tool. This paper analyzed and compared to the tube hydroforming process to using of general and preformed bending tube, also explained the importance of tube bending and preforming process. The explicit finite element program PAM-STAMP$\^$TM/ was used to simulate the tube hydroforming operations.

• 소성∙가공
• /
• 제11권4호
• /
• pp.302-311
• /
• 2002

A generalized numerical approach based on the finite element method to analysis and design of hydroforming process is proposed in this paper. The special attention is focused on comparison of an implicit and an explicit finite element method widely used for hydroforming simulation. Furthermore, in order to meet the increasing real needs for prediction of forming limit, a ductile fracture criterion combined with finite element method is introduced and then applied to hydroforming process of an automobile lower m Consequently, the numerical analysis and design for hydroforming process presented here will facilitate the development and application of the tube hydrofoniung process to a new level.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.105-110
• /
• 1998

본 연구에서는 수소화물의 파괴가 일어나는 조건과 수소화물의 파괴가 압력관 재료의 파괴인성에 미치는 영향에 대하여 알아보았다. 사용된 재료들은 상용 캐나다 압력관 재료와 러시아에서 개발된 E635, El25라는 재료로서 균열진전방향이 압력관의 축방향을 향하도록 CT 시편을 제작하여 파괴시험을 하였다 상온에서 파괴인성은 캐나다 압력관재료, El25, E635의 순서로 크게 나왔다. 100ppm의 수소를 장입한 경우 상온에서의 파괴인성은 크게 감소하여 세 재료들 모두 비슷한 평평한 J-R 커브를 보였으며, 캐나다 재료와 E63S의 파면에서 관찰되는 fissure의 간격은 150～200$\mu\textrm{m}$로 수소화물의 간격과 비슷하였으며 tunnelling 현상이 일어났다. El2S는 불규칙한 짧은 fissure들이 관찰되었다. 20$0^{\circ}C$에서는 수소화물의 파괴에 의한 fissure들이 관찰되지 않았으며 수소화물이 파괴인성에 영향을 미치지 않는 것으로 나타났다. El25는 상온과 20$0^{\circ}C$에서의 J-R커브가 비슷하게 나타났다.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.18-24
• /
• 2002

This study verified the relationship between fracture mechanics parameters(${\Delta}K,\;K_{max}$) and X-ray parameters ($(\sigma}_r,;B$) for G365 steel at elevated temperature up to $300{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to crack length direction was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase in low ${\Delta}K$ region, reach to a maximum value at a certain value of $K_{max}$ or ${\Delta}K$ and then decrease. Residual stress was independent on stress ratio by arrangement of ${\Delta}K$ and half value breadth was independent by the arrangement of $K_{max}$. The equation of ${\sigma}_r-{\Delta}K$ was established by the experimental data. Therefore, fracture mechanics parameters could be estimated by the measurement of X-ray parameters.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.49-53
• /
• 2001

Recently hydroforming process became a process which is increasingly applied in the automotive industry. As the hydroforming process is a new technology, there is no abundant data to assist manufacturing the products. To investigate the effects of process parameters on the tube hydroforming process, simple bulging, circular bulging and Tee-fitting tests are performed. The optimal leading path to escape the failure modes(bursting, wrinkling) is determined and the effects of the process parameters, the internal pressure and axial feeding on the product quality, such as thickness distribution, forming height and branch dome shape are investigated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.54-58
• /
• 2001

In recent years, hydroforming technology has been one of the most important technology in automotive industry in the points of weight saving, cost reduction and qualify improvement. However, compared with traditional metal forming technology, hydroforming has much fewer information in experience and empirical knowledge. But we don't have my sufficient time and money to produce hydroforming products using real blank directly Therefore Simulation is essential in hydrofonrung technology development. In this paper, we simulate the side member as the tubular hydroforming technology. The manufacturing process of side member' consists of pre_bending, pre_forming, and hydroforming of a thin tube. Variables such as internal pressure, end feeding, and tool geometry are optimized to improve the forming safety. And we simulate side member according to several lubricant conditions. from those simulations, we find that strain distributions can be reduced well by internal pressure and end feeding control, and lubrication is the most important thing in hydroforming process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.210-213
• /
• 2004

Based on plastic instability, analytical prediction of bursting failure on tube hydroforming processes under combined internal pressure and independent axial feeding is carried out. Bursting is irrecoverable phenomenon due to local instability under excessive tensile stresses. In order to predict the bursting failure, three different classical necking criteria such as diffuse necking criterion for sheet and tube, local necking criterion for sheet are introduced. The incremental theory of plasticity fur anisotropic material is adopted and then the hydroforming limit and bursting failure diagram with respect to axial feeding and hydraulic pressure are presented. In addition, the influences of the material properties such as anisotropy parameter, strain hardening exponent on bursting pressure are investigated. As results of the above approach, the hydroforming limit in view of bursting failure is verified with experimental results.