• 보존과학회지
• /
• 제18권
• /
• pp.105-110
• /
• 2006

경기도 남양주시 호평리 유적에서 발굴된 목관재(木棺材)의 수종식별 및 연륜연대 분석을 실시하였다. 합장묘인 큰 관(남자)과 작은 관(여자)에서 23점의 수종을 분석한 결과 관재는 모두 소나무류로 식별되었다. 운구 때 악귀를 막는 데 쓰이는 운삽(雲?) 2점은 피나무로 식별되었다. 연륜연대에 의해 남자 관과 여자 관의 마지막 나이테가 각각 1620년과 1570년으로 측정되었다. 수피가 없어 정확한 벌채연도를 알 수 없었기 때문에 변재 연륜수를 적용한 결과 남자 관은 1620년 직후에 그리고 여자 관은 이보다 다소 이른 시기에 벌채된 관재로 제작된 것으로 추정되었다.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1508-1516
• /
• 2003

In numerical analysis for hydroforming process, the stress calculation is effected by flow stress which is general obtained by stress-strain relationship from uni-axial tension test, so the result of the analysis, especially in tube hydroforming, has limitation of accuracy, tubes are made in roll-forming process and become work-hardened. Then roll forming process causes material properties between rolling direction and circumstantial direction of the tube to be different. So it is difficult to predict material behavior in the process condition of bi-axial stress state. In this study, the flow stress of the tube is determined by inverse engineering approach and bulge test that is widely used for formability test in the condition of bi-axial stress. And Hill's quadratic yield function and flow rule are used to consider the anisotropy of the tube in the roll forming process.

• Journal of the Korean Wood Science and Technology
• /
• 제34권6호
• /
• pp.12-20
• /
• 2006

전주 마전 유적에서 출토된 회곽묘 1기에 사용된 목재의 수종 식별과 연륜연대 분석을 하였다. 수종 식별 결과, 관재는 모두 소나무속중 소나무류 (적송류)로 동정되었다. 7개의 관재로부터 총 24점의 관편에 대한 연륜연대 분석결과, 6개에 대한 연대를 부여할 수 있었다. 횡대에 쓰인 관재는 수피를 그대로 간직하고 있고 마지막 나이테가 만재까지 완전히 형성되어 있어 1637년 가을에서 1638년 봄 사이에 벌채된 목재로 관을 제작하였음을 알 수 있었다. 다만 벌채후 건조, 저장 기간으로 인하여 연륜연대와 관의 제작 및 매장 연도와는 다소 차이가 있을 수 있다.

• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.3-15
• /
• 1985

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2005년도 제21회 발표논문집
• /
• pp.111-113
• /
• 2005

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2005년도 제21회 발표논문집
• /
• pp.98-100
• /
• 2005

• 건축구조
• /
• 제15권2호
• /
• pp.16-19
• /
• 2008

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.63-68
• /
• 2001

SG-365 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ATM E813-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_IC. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases the scattering of them and tunneling and shear lip by the side groove.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.642-647
• /
• 2007

Determination of loading conditions for tube hydroforming(THF) process that implies an amount of the increment in axial feeding and internal pressure for each step is one of the most important constituents at the process design level. On account of the fact that those design factors mentioned above are imposed simultaneously during the process, suitable loading conditions are required to obtain robust products without any failure such as buckling, necking, bursting and so on. In which, especially, bursting is well known as the most frequently occurred failure in general THF process. In this study, therefore, determination of the loading condition based on the adaptive method was carried out to obtain safe loading paths. In addition, forming limit curves are applied to evaluate the derived loading conditions by using the simulation results. Consequently, it is found that described method in this study for THF process design is useful and has a feasibility.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.350-356
• /
• 2001

SG-50 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the J$_{IC}$. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases the scattering of them and tunneling and shear lip by the side groove.e.