• Title/Summary/Keyword: 관성력

Search Result 246, Processing Time 0.031 seconds

크랭크축-실린더블록 계의 진동해석

  • 오성환
    • Journal of the KSME
    • /
    • v.25 no.5
    • /
    • pp.406-412
    • /
    • 1985
  • 연소 동안에 크랭크 축은 오일 필름을 통하여 연소압력이 실린더 블록으로 전달된다. 점화 전에 관성력에 의한 크랭크 축의 굽힘 변형은 크랭크 축으로부터 메인 베어링까지의 연소하중 전달에 큰 영향을 미친다. 메인 베어링에 베어링 보를 부착시키거나 크랭크 축의 굽힘 강성을 변화시켜 실린더 블록의 스커어트 진동을 감소시키는 효과를 얻었다. 크랭크 축의 비틂 진 동을 일으키는 회전력과 관성력 변동의 합력은 크랭크 저어널의 횡진동을 일으킨다. 크랭크 축의 횡 강제진동은 베어링 1에서 최대값이기 때문에 실린더 블록의 굽힘, 비듦 진동에 대하여 기진력이 된다. 실린더 블록의 진동 진폭은 관성력 변동의 주파수가 실린더 블록의 공진진 동수에 가까워지는 정도와 크랭크 축 비듦 진동의 진폭에 의존한다. 크랭크 풀리의 극관성 모우멘트와 크랭크 축 비듦 진동을 감소시키는데 효과를 준다.

  • PDF

초고진공중의 Tribo-Coating막의 윤활특성 (2)

  • 김형자;전태옥
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1993.10a
    • /
    • pp.617-621
    • /
    • 1993
  • 우주는 무중력, 또한 초고진공의 세계이다. 우주에서 기계가 작동할 때, 운동 저항은 마찰력과 관성력만이 작용한다. 여기서 관성력은 가속, 감속 일 때만 작용하며 그 힘은 정확하게 계산하여 얻을 수 있다. 이것에 대하여 마찰력은 접촉면에 항상 존재하며, 또한 비정상이다. 본 연구에서는 피막재로서 앞서의 보고에서 이미 유효성이 나타난 바 있는 In을 사용하여 마찰 반복수에 따른 마찰관계변화에 미치는 Pin, disc의 표면 거칠기의 변화의 영향을 명확하게 밝히고, 초고진공중에 있어서 Tribo-Coating법에 의한 In막은 윤활기구를 검토하고자 한다.

  • PDF

Stress calculation for I.C. engine crankshaft (내연기관 crankshaft의 응력계산)

  • 고병식
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.10 no.5
    • /
    • pp.33-41
    • /
    • 1988
  • 내연기관에서 crankshaft는 piston에 작용하는 수직 gas force 및 관성력을 회전력으로 바꾸어 주는 역할을 한다. 그러므로 engine작동중 높은 부하를 반복적으로 받기 때문에 이에 견딜 충분한 stiffness를 유지해야 한다. Engine의 stroke 운동시에 gas force와 관성력이 변하고 crankshaft의 형상이 복잡하므로 실제적으로 응력계산은 간단하지 않다. 여기에서는 crankshaft에 작용하는 하중과 반력을 계산하고 crankshaft의 stress 및 safety factor를 계산하여 crankshaft를 설계하는 방법을 설명하고자 한다. 근래 FEM에 의한 stress analysis를 많이 수행하나, loading condition을 주기 위해서는 classical method에 의해서 구할 수 있다.

  • PDF

Connecting Rod의 强度計算

  • 조영갑
    • Journal of the KSME
    • /
    • v.20 no.6
    • /
    • pp.442-447
    • /
    • 1980
  • 내연기관에 있어서 connecting rod는 piston에 작용하는 가스압력과 관성력을 소단부로 부터 shaft를 거쳐 대단부를 통하여 Crankshaft에 전달하는 역할을 한다. 그러므로 기관의 운제중 끊 임없이 인장, 압축, 좌굴, 굽힘등의 하중을 반복하여 받기 때문에 이것에 견딜 충분한 강성을 지해야 한다. 그러나 일반적으로 connecting rod에 작용하는 하중과, 각부분에 나타나는 응력의 해석은 간단하지 않다. 왜냐하면 행정을 수행하는 동안 크랭크의 각 위치에 대하여 가스 압력 이나 관성력이 변하고, 또한 connecting rod 자체의 형상도 복잡하게 구성되기 때문이다. 따라서 보다 계산을 간단하게 하기 위하여 여기에서는 일단 connecting rod에 작용하는 하중은 최악조 건으로서 최대발압력 및 최대관성력을 적용하기로 하고, 계산결과에 따라 취약부위에 대한 은 력을 검토하기로 한다. 특히 대단부에 있어서는 cap을 연결하는 보울트가 불리면에 작용하는 하중을 충분히 견딜 수 있어야 하므로 보울트계산 또한 중요하나 여기서는 취급치 않고, 다만 이 계산에서 구한 하중을 사용하여 VDI 2230에 의한 방법으로 계산하면 될 것이다.

  • PDF

Vibration Control for Building Structures using Active Mass Driver (II) : Shaking -Table Test (능동제어장치를 이용한 건물의 진동제어 (II) : 진동대 실험)

  • 민경원;김두훈;이성경;황재승
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.2 no.4
    • /
    • pp.95-102
    • /
    • 1998
  • 본 연구의 목적은 능동질량 장치를 이용하여 지진하중을 받는 건물모델의 응답을 제어하는 것으로서 실험에 사용된 능동질량 장치는 교류형 서보 모터에 의해 관성력이 건물모델의 응답에 반작용하여 제어를 하게 되는 원리를 이용한 것이다 소형 진동대에 의한 외부하중 묘사 신호처리와 제어력 발생을 위한 장비들이 구축된 실험 모델로써 능동 질량 추진기가 1층 전단형 건물모델 상부에 설치된 해석 모델을 실현하였으며 제어력 산정을 위한 선형 2차 제어 알고리듬은 LabVIEW 프로그램을 사용해서 구현하였다. 건물의 응답과 제어력을 고려해서 제어성능을 검증하였으며 능동 질량 장치를 설치함으러써 공진하중과 지진하중에 대한 건물의 응답이 감소하고 또한 속도피드백 알고리듬이 그 외의 피드백 알고리듬 보다 제어력이 가장 적게 소용되면서 건물의 응답을 감소시키는 것을 실험적으로 파악하였다.

  • PDF

새로운 병렬형 구형 3자유도 메커니즘의 기구학 특성 분석

  • 최기영;이석희;김희국;이병주
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.05a
    • /
    • pp.276-276
    • /
    • 2004
  • 기존 대부분의 회전형 3 자유도 메커니즘은 직렬 구조로서 해석은 비교적 용이하지만 처짐과 커다란 관성력은 주요한 약점으로 인지되고 있다. 이에 반하여 병렬 메커니즘은 여러 부속 체인을 가지는 구조로 인한 높은 강성과 무거운 엑츄에이터를 지면 가까이 설치할 수 있게 함으로서 상대적으로 적은 처짐과 적은 관성력을 가지는 반면에 상대적으로 기구학 및 동역학 해석은 매우 복잡한 것으로 알려져 있다.(중략)

  • PDF

쇄파파력 결정을 위한 수치해석

  • 심재설;전인식;이홍식
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 1998.09a
    • /
    • pp.100-105
    • /
    • 1998
  • 해양구조물의 연직 원형파일에 작용하는 파력은 주로 항력과 관성력의 합으로 표시되는 Morison 식을 이용하여 결정하여 왔다. 그러나 Morison 식은 대칭형상을 유지하며 비교적 완만히 변화하는 파에 대해서 적용이 가능하다. 구조물 부재에 쇄파가 작용할 경우, 쇄파파력은 항력과 관성력에 추가하여 강한 충격쇄파력을 포함하게 된다. 본 연구는 임의 이차원 경사해빈에서 경계요소법을 적용하여 쇄파 내부점들의 수립자 속도 및 가속도를 계산하고, 이들을 이용하여 쇄파에 의한 쇄파파력을 계산하기 위한 모델기법을 수립한다.(중략)

  • PDF

Verification of Calculated Hydrodynamic Forces Acting on Submerged Floating Railway In Waves (파랑 중 해중철도에 작용하는 유체력 계산 및 검증)

  • Seo, Sung-Il;Mun, Hyung-Seok;Lee, Jin-Ho;Kim, Jin-Ha
    • Journal of the Korean Society for Railway
    • /
    • v.17 no.6
    • /
    • pp.397-401
    • /
    • 2014
  • In order to rationally design a new conceptual submerged floating railway, prediction of wave forces applied to the structure is very important. In this paper, equations to calculate such forces based on hydrodynamic theories were proposed and model tests were carried out. Inertia forces and drag forces, calculated using Morison's equation and the linear small amplitude wave theory, were in good agreement with the results from model tests conducted in a wave making tank. Drag forces were negligible compared with inertia forces. Also, wave forces showed linear variation with the changing wave heights. It was revealed that the linear wave theory and Morison's equation can give a simple and useful solution for the prediction of wave forces in the initial design stage of a submerged floating railway.

Analysis on Phase Relation between Inertia Force and Dynamic Earth Pressure of Caisson by Numerical Analysis (수치해석을 이용한 우물통 기초의 관성력과 동적토압의 위상관계 분석)

  • Kim, Sung-Ryul;Jang, Hak-Sung
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.12 no.2
    • /
    • pp.23-31
    • /
    • 2008
  • Dynamic earth pressure acting on geotechnical structures can be driving force or resisting force for the displacement of the structure according to the phase relation between the dynamic earth pressure and inertia force of structures. In this research, the evaluation procedure of the phase relation between the dynamic earth pressure and the inertia force was proposed. According to the procedure, numerical analyses on caisson foundation of bridges were performed and the phase relation was analyzed. The analysis results showed that the dynamic earth pressure becomes the driving force, which increases the displacement of the structure, if the displacement amplitude of ground is larger than that of structure due to the low stiffness of the ground, and the dynamic earth pressure becomes the resisting force against the displacement of the structure if the displacement amplitude of ground is smaller than that of structure due to the high stiffness of the ground.

Influence of Backfill Condition on Force Components of Gravity Walls During Earthquakes (지진시 배면지반 조건이 중력식 안벽의 하중성분에 미치는 영향)

  • Kim Sung-Ryul;Hwang Jae-Ik;Kim Myoung-Mo
    • Journal of the Korean Geotechnical Society
    • /
    • v.22 no.1
    • /
    • pp.15-23
    • /
    • 2006
  • During earthquake, force components acting on quay walls consist of inertia force, earth pressure and water pressure. The earth pressure is largely influenced by the backfill condition such as soil density and the installation of gravel backfill. Therefore, shaking table tests were performed by using four different model sections, which were designed by varying the soil density and the backfill materials. The magnitude and the phase of force components acting on quay wall were analyzed. Test results showed that the gravel backfill and the soil compaction were effective to reduce the excess pore pressure in backfill and the magnitude and phase of backfill thrust were much influenced by the excess pore pressure in backfill. When the input acceleration was 0.10g, the average ratios of the inertia force, the front dynamic water force and the thrust to the total force were $64\%,\;21\%\;and\;16\%$, respectively. As the excess pore pressure increased, the ratio of the thrust to the total force increased.