• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.53-53
• /
• 2004

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.55-64
• /
• 1996

A numerical model of refrigerant flow through a capillary tube is developed, which considers the effects of underpressure for vaporization, kinetic energy, and roughness of capillary tube. The numerical model is based on homogeneous flow assumptions for the two-phase flow region. A characteristic chart of HFC refrigerants flow through capillary tubes and correction factor chart of geometry and relative roughness of capillary tube to select a proper capillary for refrigerating machines using alternative refrigerants is presented by this numerical model.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.45-50
• /
• 2001

This experimental study concerns the characteristics of a transitional flow in a concentric annulus with a diameter ratio of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure losses and skin-friction coefficients have been measured for the fully developed flow of a 0.2 % aqueous solution of sodium carbomethyl cellulose (CMC) at a inner cylinder rotational speed of $0{\sim}600$ rpm. The transitional flow has been examined by the measurement of pressure losses, to reveal the relation of the Reynolds numbers with the skin-friction coefficients, in the laminar and transitional flow regimes. The occurrence of transition has been checked by the gradient change of pressure losses and skin-friction coefficient with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, it is gradually declined for turbulent flow regime. Consequently, the critical(axial-flow) Reynolds number decrease as the rotational speed increases. Thus, the rotation of inner cylinder promotes the early occurrence of transition due to the onset of taylor vortices.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2095-2100
• /
• 2003

This Experimental study concerns the characteristics of vortex flow in a concentric annulus with a diameter ration of 0.52, whose outer cylinder is stationary and inner one is rotating. Pressure losses and skin-friction coefficients have been measured for fully developed flow of bentonite-water solution(5%) when the inner cylinder rotates at the speed $0{\sim}400rpm$. The results of present study reveal the relation of the bulk flow Reynolds number Re and Rossby number $R_o$ With respect to the skin friction coefficients. The effect of rotation on the skin friction coefficient is significantly dependent on the flow regime. In all flow regime, the skin friction coefficient is increased by the inner cylinder rotation. The critical (bulk flow) Reynolds number $Re_c$ decreases as the rotational speed increases. Thus, the rotation of the inner cylinder promotes the onset of transition due to the excitation of Taylor vortices.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.12
• /
• pp.4003-4012
• /
• 1996

Hydro dynamically developing and simultaneously (hydro dynamically and thermally) developing laminar flows of a Bingham plastic in a circular pipe have been investigated numerically. Solutions have been obtained by using a four-step fractional method combined with an equal order bilinear finite element method. For the hydro dynamically developing flow, shorter entrance length is required to reach fully developed velocity field for larger yield stress and non-monotonic pressure drop along the pipe centerline is observed when the yield stress exceeds a certain critical value. For the simultaneously developing flow, the heat transfer characteristics show the same trends as those predicted for the thermally developing flow (Graetz problem).

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.631-636
• /
• 2000

The experimental study concerns the characteristics of a transitional flow in a concentric annulus with a diameter ration of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure drops and skin-friction coefficients have been measured for the fully developed flow of water and that of glycerine-water solution (44%) at a inner cylinder rotational speed of $0{\sim}600$ rpm, respectively. The transitional flow have been examined by the measurement of pressure drops and the visualization of flow field, to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients and to understand the flow instability mechanism. The present results show that the skin-friction coefficients have the significant relation with the Rossby numbers, only for laminar regime. The occurrence of transition has been checked by the gradient changes of pressure drops and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, is gradually declined for turbulent flow regime. Consequently, the critical (axial-flow) Reynolds number decreases as the rotational speed increases. Thus, the rotation of inner cylinder promotes the early occurrence of transition due to the excitation of taylor vortices.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.147-147
• /
• 2020

2019년 10월 2일 ~ 3일 한반도에 상륙한 태풍 미탁으로 인해 사망 12명, 실종 3명, 부상 11명의 인명피해가 발생하였으며, 피해의 주된 원인은 토석류를 동반한 산사태로 나타났다. 특히 10월 10일 1차 특별재난지역으로 선포된 삼척시 원덕읍 갈남리 일대에는 산사태 발생 추정시간(10.2일 23:00)의 최대 시우량 110.5mm, 피해발생 양일 누적강우량(10.2.~10.3.) 417mm를 기록하였고 태풍과 집중호우에 따른 토석류가 갈남리 일대 유역에서 동시다발적으로 발생하여 하류부에 위치한 인근 지역에 관내 639세대, 1,167명의 이재민과 1,896백만원의 피해액이 발생하였다. 본 연구에서는 피해가 발생한 삼척시 갈남리 일대를 중심으로 경계조건 및 지형자료를 구축하기 위해 현장조사를 통하여 토석류의 시작지점, 계류의 폭 등 피해 발생 지점에 대한 조사를 실시하였다. 그리고 RAMMS 모델링을 이용하여 토석류의 유동특성인 유동심 및 유속을 분석하여 비교적 높은 유동심·유속이 확인되는 위치에 토석류 저감시설을 구축하였다. 이를 바탕으로 저감시설의 설치 위치에 변화를 주어 토석류의 확산면적, 이동거리 등 저감 된 유출량을 평가함으로 저감시설의 최적 위치 선정을 제시한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1621-1632
• /
• 1993

A numerical simulation is carried out on flows in a rotating serpentine flow passage, which models a cooling passage in a gas turbine blade, by using a 3-D FVM based TURBO-D program. When it is rotating, the flow field exhibits quite different aspects due to the effect of the Coriolis force. Especially the secondary flow field appearing in the cross-sectional area is very complex because of the combined effect of the Coriolis force and the centrifugal force in the curved area. Local Nusselt numbers are also obtained based on the Reynolds analogy and compared with the published experimental data showing a good agreement. The results of the present study can be applied to the design of cooling passages of a gas turbine blade.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.93-99
• /
• 2006

Methods to distinguish flow regimes in gas-solid fluidized bed have been investigated by adopting the concept of chaos theory. Pressure fluctuations have been chosen as a state variable for the analysis of the system. Pressure fluctuations obtained from differential pressure transducer have been investigated using the chaos analysis (Correlation dimension and Kolmogorov entropy) as well as the average and standard deviation. As a result, fluidization regimes in gas-solid fluidized bed can be distinguished by statistics methods as the average and standard deviation. Also, Correlation dimension and Kolmogorov entropy could be used to classify the fluidization regimes.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.738-741
• /
• 2001

The purpose of the present study is to measure the viscosity of liquid in the capillary tube viscometer using the unsteady flow concept. The capillary tube viscometer is consisted of a small cylindrical reservoir, capillary tubes, and the mass flow rate measuring system interfaced with computer. Two capillary tubes with 1.152 and 3.002 mm I.D. are used to determine the diameter effects on the viscosity measurements. The instantaneous shear rate and gravitational driving force in the capillary tube are determined by measuring the mass flow rate through the capillary tube instantaneously. The measured viscosities of water and aqueous Separan solution are in good agreement with the reported experimental data.