• Journal of Korea Multimedia Society
• /
• v.9 no.3
• /
• pp.323-332
• /
• 2006

Fair packet scheduling algorithms supporting quality-of-services of real-time multimedia applications can be classified into the following two schemes in terms of the reference time used in calculating the timestamp of arriving packet; the Finish-Time (FT) and Start-Time (ST) schemes. The FT scheme, used in most schedulers, that has the property of an inversely rate-proportional latency is suitable to support various delay bounds because it can adjust the latency of a flow with raising the flow's reserved rate. However, the scheme may incur some bandwidth loss due to excess rate reservation. Meanwhile, although the ST scheme does not suffer from the bandwidth loss, it is hard to support multiple delay bounds because of its latency property relying on the number of flows. This paper is devoted to propose a ST scheme based scheduler to effectively support multiple delay bounds and analyze its performance comparing to the FT scheme based scheduler. The comparison results show that the proposed scheduler gives better utilization by up to 50%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.309-315
• /
• 2012

Catalytic combustion is generally accepted as one of the environmentally preferred alternatives for heat and power from fossil fuels, as it has the advantage of stable combustion under very lean conditions with such low emissions as UHC, CO, and NOx. In this work, therefore, comparative numerical studies on the catalytic combustion behaviors over Pd-based catalysts have been conducted with the gaseous $CH_4$, $C_2H_6$, and $C_3H_8$. In the following, after introducing the governing equations with 1D channel and Langmuir-Hinshelwood models, numerical investigations on the catalyst performance are conducted by changing such various parameters as inlet temperature, excess air ratio, and space velocity. The numerical results show that outlet temperature and conversion of $C_3H_8$ are highest among others because of its chemical structure and reactivity.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.295-300
• /
• 2010

A binary system of 1-propanol and bromochloromethane which exhibits an azeotropic point and a considerable nonideal phase behavior probably due to the large boiling point difference is not amenable in the actual chemical processes such as the distillation tower and absorber. Therefore, experimental data of phase behavior data of this mixture are indispensable in understanding the inherent thermodynamic characteristics for an efficient application of the system in the industrial processes. In this work, the isobaric vapor-liquid equilibrium of a binary mixture consisting of 1-propanol and bromochloromethane was measured by using a recirculating equilibrium cell at various pressures ranging from 30 to 70 kPa. The measured VLE data were correlated in a satisfactory manner by using the UNIQUAC and NRTL models along with the thermodynamic consistency test based on Gibbs/Duhem equation. In addition, the excess molar volume of the mixture was also measured by using a vibrating densitometer and correlated with a Redlich-Kister polynomial.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.135-141
• /
• 2005

Nitric oxide(NO) reduction by methanol was investigated over $La_2O_3$ catalysts in the presence and absence of oxygen. In the absence of $O_2$, $CH_3OH$ reduced NO to both $N_2$ and $N_2O$, with selectivity to $N_2$ formation decreasing from 81-88% at 623K to 47-71% at 723 K. With 1.2% $O_2$ in the feed, the rates were 4-8 times higher, but the selectivity to $N_2$ dropped from 50% at 623 K to 9% at 723 K. The specific activities with $La_2O_3$ for this reaction were higher than those for other reductants; for example, at 773 K with hydrogen a specific activity of $34\;{\mu}mol\;NO/sec{\cdot}m^2$ was obtained whereas that for methanol was $638\;{\mu}mol\;NO/sec{\cdot}m^2$. The Arrhenius plots were linear under differential reaction conditions, and the apparant activation energy was consistantly near 15 kcal/mol with $CH_3OH$. Linear partial pressure dependencies based on a power rate law were obtained and showed a near-zero order in $CH_3OH$ and a near-first order in $H_2$.

• Journal of Gifted/Talented Education
• /
• v.18 no.3
• /
• pp.613-634
• /
• 2008

This Study focused on understanding the relationship between the child ren's thinking ability which is based on the genius and the parenting attitude according to their level of age. There were 401subjects including mothers and their children who lived in Seoul city ages from four to six. The Raven CPM testing method for children and the parenting attitude test were used as research tools. Subcategories of the parenting attitude test consisted of the supportive expression, the rational explanation, the achievement press, high involvement, punishment, superintendence, high expectation, and inconsequence. Results showed that by age four children's thinking abilities were affected by the rational explanation, the achievement press, punishment, and superintendence. At age five, the supportive expression and superintendence were important factors to the thinking ability. By age six children were affected by the supportive expression, the rational explanation, punishment and high expectation. It was also discussed the positive or negative effects of the parenting attitude sub-scales to the development of the thinking ability. These results showed the parenting attitudes need to be changed according to the child's age for getting more resonable results to their children's thinking ability.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1033-1040
• /
• 2011

The premixed burner is a very strong candidate for using household boiler burner system because it has high efficiency, low emission and can be used in compact boiler system. Usually, household boiler burner systems use a Bunsen burner, which consists of an inner rich premixed flame and fuel burned completely by a secondary air supply. It has a relatively long flame length and operates in a high excess of air, so it is difficult to fit such a burner into a high efficiency compact boiler. In this paper, the characteristics of a premixed combustion burner for surface media such as metal fiber, ceramic, and SUS fin were evaluated. In particular, the flow velocity over the burner surface for the cold flow characteristics of the surface material were measured and adjusted. The combustion tests were carried out by taking pictures of the flame and measuring the flame temperature. The amounts of CO and NO were measured and the characteristics of the surface burner materials, combustion chamber, and heat exchangers were evaluated for various excess air ratios and heating values.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.630-635
• /
• 2004

The etiology of mesiodens is unknown but the most widely accepted theory is the hyperactivity of the dental lamina. Complications of mesiodens are delayed or prevented eruption of maxillary central incisors, displacement or rotation of permanent teeth, crowding of affected region, abnormal diastema or permanent space closure, dilaceration or abnormal root development of permanent teeth, primordial or follicular cyst formation, root resorption of adjacent teeth, eruption into nasal cavity. If mesiodens rotate the maxillary central incisors, space deficiency is not common and relapse is very common. So overcorrection is needed. To prevent the rotational relapse, early treatment, overcorrection, long retention period, properly formed proximal surface, use of coupled force, and surgical techniques have been suggested. The authors present two cases, whose chief complain were severely rotated maxillary incisors by mesiodens, treated by orthodontic and surgical technique and showed good results.

• Journal of the Society of Disaster Information
• /
• v.15 no.1
• /
• pp.84-97
• /
• 2019

Purpose: The consolidation settlement of soft ground is dependent on the distribution of pore water pressure which is also affected by hydraulic conductivities (boundary condition) of layers, thickness of clayey soil layer and surcharge. Results: However, the current consolidation analyses are mostly based on Terzaghi's consolidation theory that assumes the initial pore water pressure ratio with depth to be constant. In this study, numerical analysis are carried out to investigate the variation of pore water pressure dissipation with depth and thickness of clayey soil layer, time, surcharge as well as drainage conditions. Conclusion: Comparative study with Terzaghi's consolidation theory is also conducted. The result shows that Terzaghi's consolidation theory should be used with caution unless it is ideally corresponded to the isochrone.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.28-33
• /
• 2020

In this study the possibility of hydrogen as a fuel in a small-sized two-stroke SI (Spark ignition) engine was investigated. For this purpose, experimental setup including an engine, a dynamometer, equipments for hydrogen and lubricant oil supply was prepared. And then preliminary experiments for the hydrogen-fueled engine combustion were conducted. In the case of hydrogen-fueled engines comparing to gasoline backfire occurs when the excess air ratio is lower than a specific value. This can cause engine power reduction and damage to the engine parts. The engine was controlled to operate at lean conditions to prevent backfire. Through the control of excess air ratio, the maximum engine brake power output of 3 kW was achieved in a 210 cc engine, while it was 6 kW in case of gasoline fuel.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.1
• /
• pp.17-33
• /
• 2022

This study describes the effect of ground water table on the dynamic analysis of single piles subjected to earthquake loading. The dynamic numerical analysis was performed for different dry and saturated soils with varying the relative densities of surrounding weathered soils (SM). The test soil was a weathered soil encountered in the engineering field and bender element tests were conducted to estimate the dynamic properties of test soil. The Mohr-Coulomb model and Finn model were used for soil, dry and saturated conditions, respectively. These models validated with results of centrifuge tests. When compared with the results from the soil conditions, saturated cases showed more lateral displacement and bending moment of piles than dry cases, and this difference caused from the generation of excess porewater pressure. It means that the kinematic effect of the soil decreased as the excess pore water pressure was generated, and it was changed to the inertial behavior of the pile.