• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.65-70
• /
• 2003

In this paper, an adapted TWC model and its application to the monitoring algorithm are proposed. As TWCs have the different characteristics, the model has to be corrected to diagnose more accurately. In the TWC model oxygen storage and release rate model are adapted to the installed TWC to whose characteristics related. The model learns from the downstream $O_2$ sensor output during the vehicle's operation. From the results, the model is adapted to the Installed TWC's characteristics. using this model, the monitoring algorithm can diagnose the no more accurately. Finally the algorithm is validated with simulations using the data logged from a retail car.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.258-262
• /
• 2000

$YMnO_3$thin films are deposited on Si(100) and $Y_2O_3/Si(100)$ substrate by radio frequency sputtering. The deposition condition of oxygen partial pressure and annealing temperature have significant influences on the preferred orientation of $YMnO_3$film and the size of memory window. The results of x-ray diffraction show that the film deposited in the oxygen partial pressure of 0% is highly oriented along c-axis after annealing at $870^{\circ}C$ for 1 hr in oxygen ambient. However, the films deposited on Si and $Y_2O_3/Si$ in the oxygen partial pressures of 20% show $Y_2O_3$ peak, the excess $Y_2O_3$ in the $YMnO_3$film suppresses the c-axis oriented crystallization. Especially memory windows of the $Pt/YMnO_3/Y_2O_3/Si$ capacitor are 0.67~3.65 V at applied voltage of 2~12 V, which is 3 times higher than that of the film deposited on $Y_2O_3/Si$ in 20% oxygen (0.19~1.21 V) at the same gate voltage because the film deposited in 0% oxygen is well crystallized along c-axis.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.7-14
• /
• 2001

In this work, the chemical composition of the exhaust gas from domestic gas boiler has been analysed in the point of thermodynamics and CO sensor has been characterized. We proposed that the combustion condition can be estimated by the exhaust gas composition, i.e., the excess air ratio and combustion temperature can be calculated simply by the measurement of the $O_{2}$ fraction and $H_{2}/CO$ in the exhaust gas. By analyse the on site situation domestic boiler, the excess air ratio is about $55\~110\%$. Therefore, the CO may be produced in domestic gas boiler by luminous(yellow) flames rapidly lose heat by radiation, turbulent flames may be partially quenched by the action of steep velocity gradients, and flames burning very close to a cold wall may be partial1y quenched by heat conductivity to the wall. The output voltage of CO sensor is lineally depend on the CO and $H_{2}$concentration. And the exhaust CO from boiler can be reduced by closed loop control with CO sensor

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.213-220
• /
• 2007

Appropriate numerical models for the simulation of off-gas flow in hot area of the vitrification plant have been developed in this study. The models have been applied to analyze the effect of design parameters of real plant and numerical analyses have been performed for CCM(Cold Crucible Melter), pipe cooler and HTF(High Temperature Filter). At first, the effect of excess oxygen and the ratio of oxygen distribution on combustion characteristics in the CCM has been studied. Next, solidification behavior of radio nuclide in the pipe cooler has been numerically modeled and scrutinized. Finally, flow pattern in accordance with the location of off-gas entrance of the HTF has been compared.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.10-17
• /
• 2004

The results of the combustion performance tests of gas generator which supplies hot gas into the turbine of turbo-pump for liquid rocket engine and uses LOx and kerosene as propellant are described. The gas generator consists of a injector head with F-O-F impinging injector, a water cooled combustion chamber, a gas torch igniter, a turbulence ring and an instrument ring. The effect of turbulence ring and combustion chamber length on performance of gas generator are investigated. The ignition and combustion at design point are stable and the pressure and gas temperature at gas generator exit meets the target. The turbulence ring installed at middle of chamber effectively mixes hot gas with cold gas and the effect of residence time of hot gas in gas generator on combustion efficiency is small. Test results show that the main parameter controlling the gas temperature at gas generator exit is overall O/F ratio.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.69-78
• /
• 2005

Appropriate numerical models for the simulation of off-gas flow in hot area of the vitrification plant have been developed in this study. The models have been applied to analyze the effect of design parameters of real plant and numerical analyses have been performed for CCM(Cold Crucible Melter), pipe cooler and HTF(High Temperature Filter) At first, the effect of excess oxygen and the ratio of oxygen distribution on combustion characteristics in the CCM has been studied. Next, solidification behavior of radio nuclide In the pipe tooler has been numerically modeled and scrutinized. Finally, flow pattern In accordance with the location of off-gas entrance of the HTF has been compared.

• Clean Technology
• /
• v.19 no.3
• /
• pp.287-294
• /
• 2013

The $NH_3$-selective catalytic reduction (SCR) reaction of NO with excess of oxygen were systematically investigated over Cu-zeolite and Fe-zeolite catalysts. Cu-zeolite and Fe-zeolite catatysts to adapt the SCR technology for mobile diesel engines were prepared by liquid ion exchange and incipient wetness impregnation of $NH_4$-BEA and $NH_4$-ZSM-5 zeolites. The catalysts were characterized by BET, XRD, FE-TEM (field emission transmission electron microscopy) and SEM/EDS. The SCR examinations performed under stationary conditions showed that the Cu-exchanged BEA catalyst revealed pronounced performance at low temperatures of $200{\sim}250^{\circ}C$. With respect to the Fe-zeolite catalyst, the Cu-zeolite catalyst showed a higher activity in the SCR reaction at low temperatures below $250^{\circ}C$. BEA zeolite based catalyst exhibited good activity in comparison with ZSM-5 zeolite based catalyst at low temperatures below $250^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.849-853
• /
• 1999

In the study, superconducting properties of $Bi_2$-x(sub)$LSr_2$Ca(sub)1+x(sub)$LCu_2$O(sub)8+d (x(sub)L=0, 0.05, 0.1, 0.2) films prepared by the LPE method was investigated. The peak decompositions of Sr3d and Ca2p XPS spectra, together with the EPMA results, elucidated the occupancies of Bi, Sr and Ca atoms on the SrO- and Ca-layers. The lattice parameter c monotonically increased with increasing x(sub)L for $0\leq$x(sub)L$\leq$0.2. The superconducting critical temperature T(sub)c showed a maximum value around x(sub)L=0.1. The x(sub)L dependence of the superconducting critical temperature T(sub)c and the lattice parameter c are explained by the changes of the excess oxygens in the BiO-layer. Since distribution and deficiency of the atoms in SrO-layer have influenced on superconducting properties and crystal structure.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.1
• /
• pp.75-132
• /
• 1997

피부는 항시 산소와 접촉하고 있고 자오선 조사에 크게 노출되어 있다. 따라서, 활성산소종으로 유도된 피부의 광산화적 손상 위험이 실질적으로 증가하고 있다. 활성산소종이란 한 무리로서 수퍼옥사이드 음이온과 히드록실 라디칼과 같은 산소 중심의 라디칼을 포함할 뿐만 아니라, 과산화수소나 싱글렛 옥시전과 같은 몇 종류의 비라디칼종들, 그 외의 다른 것으로, 활성산소종과 생체 성분과의 반응으로 유래된 과산화 라디칼, 알콕실 라디칼, 히드로과산화물 식세포에서 살균작용을 나타내는 HOCl등을 포함한다. 피부에는 복잡한 항산화 방어망이 발달되어 활성산소종에 대항하여 보호작용을 한다. SOD, 카탈라아제, 글루타치온퍼옥시다제 등의 항산화효소와 $\alpha$-토코페롤, 아스코르브산, 카로티노이드 등의 비효소적 항산화 물질들이 피부 항산화 방어망을 구축하고 있다. 그러나 계속된 자외선에의 노출로 생성된 과잉의 활성산소종은 실질직으로 피부의 효소적 그리고 비효소적 항산화 방어를 위태롭게 한다. 따라서 균형은 산화상태 쪽으로 유리하게 기울어진다 결과적으로 산화적 스트레스는 세포 성분들에 대한 손상을 야기시킨다. 지질 과산화, 단백질 산화, 탄력 섬유인 콜라겐과 엘라스틴의 사슬절단 밀 비장성적인 교차결합, 히아루론산 사슬의 절단, 멜라닌 생성반응 촉진, DNA 산화와 같은 생체 구성 성분들의 손상이 일어난다. 결국에는 탄력감소, 주름살 및 기미, 주근깨 등으로 특징 지워지는 피부노화가 가속화된다. 따라서 필요한 항상화제를 함유한 식품이나 화장품을 통한 계속적인 항산화제 보충으로 피부 항산화 방어망을 견고히 할 때 피부노화는 지연되고 억제될 것이다.주거를 구분하고 있는 것으로 조사되었으나, 아직까지 절반 가량(52.2%)의 상점들이 다른 사람 소유의 건물을 전 ·월세로 임대하여 사용하고 있음을 알 수 있었다. 이상에서 살펴본 바와 같이 고수동굴 주변의 상업적 특성은 90년대에 들어서면서 자기 고장에 있는 관광자원을 내 고향의 자랑거리로 생각하고 이를 지역발전의 밑거름으로 활용하고자 하는 인식이 늘어나고 있음을 알 수 있었다. 그러나, 관광지로서의 특성이라 할 수 있는 다른 관광동굴과의 차별성이 부족하다고 할 수 있다. 즉 다른 지역의 기념품점에서 구입할 수 없는 고수동굴만이 갖고 있는 특징적인 기념품을 판매함으로써 관광객의 구매욕구를 높인다거나 고수동굴의 일주관광 후 관광객을 좀 더 머무르게 할 수 있는 시설의 개발이 더 필요하다.유의한 차이를 나타내는 항목이 많았으며 12주에서 vehicle과 유의적인 차이를 나타내는 항목도 많으므로 3-APPA가 APSA 보다 광범위한 피부노화 억제 효과를 갖는 물질이라고 할 수 있다.주도적 역할을 수행해야 할 것이다. 넷째, 선박금융제도의 개선과 신금융상품의 개발이 요구된다. 내수 수요인 계획조선의 지원조건을 개선하고 연불수출자금을 BBC자금으로 활용토록하여 국내 선주들의 신조를 유도해야 할 것이다. 그 외에 향후 금융개방화에 맞추어 해외자금을 활용한 리스금융, 상사금융 등의 민간신용제도를 더욱 활성화하고 선진국의 선박금융기법에 대한 연구 및 도입 등 선주들에게 다양한 선박건조자금을 제공하여 내수기반 확충에도 노력해야 할 것 이다.있었다., 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.860-865
• /
• 2012

Although biomass syngas is very low calorific gas, it is utilized by means of dual fuel combustion technology in the fields of industrial furnace and boiler as a substitute oil technology. The basic structure of duel fuel combustion burner is designed so that low caloric gas fuel is supplied around an oil burner in the middle. In the present study, three types of mixing burners were manufactured to conduct performance experiment. Low caloric gas was evenly distributed around the oil burner and the method of changing the angle of gas nozzle was applied. CO generation decreased according to the increase of the amount of air for combustion. In addition, the shapes and colors of flame changed according to the proportions of gas and oil used. Remained flame after combustion was from the lack of atomization at the exit of oil burner. Although it was difficult to maintain the optimum air ratio due to different required air ratio for oil and syngas, stable combustion was able to maintained within excess oxygen concentration of 4.7~8.2%. From this study, it was shown that the oil atomization at the exit of fuel oil nozzle was promoted by the increased rate of syngas combustion and the CO concentration in flue gas lower than only fuel oil combustion.