• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.765-770
• /
• 2020

터보과급기는 엔진에 장착하여 연비를 개선하는 효과적인 장치로 디젤엔진과 가솔린엔진 모두에서 광범위하게 사용되고 있다. 본 연구에서는 승용차용 가솔린엔진에 장착되는 트윈 스크롤 터빈 터보과급기에서 정상유동의 등엔트로피 터빈 효율을 분석하였다. 자체 설계 제작한 저온 테스트 벤치를 사용하여 정상상태의 압력과 온도, 질량유량을 측정하였다. 테스트 벤치는 공기 압축기, 트윈 스크롤 터빈, 온도 및 압력 측정장치 등으로 구성되었다. 실제 승용차용 엔진에서 주로 사용되는 중저속 엔진 작동 영역에 해당하는 터보과급기 회전속도 60,000 rpm에서 100,000 rpm 의 범위에서 측정을 수행하였다. 이 회전속도 범위에서 등엔트로피 터빈 효율은 0.53에서 0.57의 값을 보였다. 이때 블레이드 속도비은 0.71에서 0.84까지, 팽창비는 1.24에서 1.72의 범위에서 변화하였다. 효율은 블레이드 속도비와 팽창비가 증가하면서 감소하는 경향을 보였다. 그리고 트윈 스크롤 중 스크롤 A 또는 B 만 작동하는 경우에 대한 실험을 수행하여 결과를 스크롤 A와 B 모두 작동할 때와 비교하였다. 60,000 rpm에서는 스크롤 B를 사용한 경우, 그리고 100,000 rpm에서는 스크롤 A를 사용한 경우 높은 효율을 보였다. 따라서 본 연구에 사용한 트윈 스크롤 터빈은 효율적으로 작동하고 있음을 보였다.

• 국방과기술
• /
• 2호통권144호
• /
• pp.36-49
• /
• 1991

Leclerc 전차는 "혁명적'방식의 장갑을 탑재하고 있다. 이 장갑은 주하중-베아링 축에 부착되는 module화된 복합 물질 요소로 구성되었으며, 손쉽게 맞춰 달수 있고, 교체가 가능하다. 이에 따라 전장에서 신속한 수리가 가능하며, 최신기술의 장갑 장착이 용이하다. 또한 기동성의 면에서 Lecerc 전차는 최신세대의 초압축형 1천5백마력 과급기형 디젤엔진을 탑재한 최초의 전차이다. 그 결과 이 전차의 차체는 Leopard 2나 M1과 같은 제2세대 전차에 비해 현저히 짧다. 현재 M1A2, 신형 Leopard 2, Challenger 2 등과 영국의 치프텐 전차 대체사업 수주를 위해 경쟁중에 있다

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.127-132
• /
• 2009

The transient performance of the passenger diesel engine equipped with the variable geometry turbocharger was simulated using HIL(hardware-in-the-loop) system. The system consists of engine model as software, and the turbocharger test bench as hardware. The engine model is mean value model which is programmed by the Simulink of the Mathworks. The turbocharger test bench is composed of a blower, some sensors, and DAQ boards. A real time simulation is possible since the operating system based on the real time is included. The results show the good response for the transient characteristics. Therefore this HIL system can be used for development of the new turbocharger effectively.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.65-73
• /
• 2007

The use of an Exhaust Gas Recirculation(EGR) for a diesel engine with variable geometry turbocharger(VGT) has confronted how to obtain the amount of EGR for NOx reduction requirement at wide operating range and less side effect. Through a combined effort of modeling(wave action simulation) and experiment, an investigation into the effect of EGR area ratio and pipe length on EGR characteristics of common rail diesel engine with VGT has been performed. For accurate computation, calibration of constants involved in empirical and semi-empirical correlations has been performed at a specific operating point, before of its use for engine simulation. From the results of this study, it was found that EGR rate is sharply increased with increasing EGR area ratio until area ratio of 0.3. However, the effect of EGR area ratio on EGR rate is negligible beyond this criteria. This study also investigates the effect of EGR pipe length on a EGR amount and pulsating flow characteristics at EGR junction. The results showed that the longer EGR pipe length, the lower EGR amount was achieved due to the flow loss resulting in lower amplitude of pressure wave.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.35-43
• /
• 2006

A four-stroke four-cylinder turbocharged diesel engine can be fitted with various types exhaust system. In this paper, the impacts of exhaust system design on scavenging performance and wave action characteristic during valve overlap are investigated by using one-dimensional gas dynamic code. This work shows that a huge reflected exhaust pressure waves which reaches the exhaust port during valve overlap period is crucial design factor which determines quality and quantity of the fresh charge. Hence pressure wave that reaches the exhaust port of the cylinder during the valve overlap sequence should be weakened for good scavenging performance. This paper describes advantages and disadvantages of the various exhaust systems applied to a turbocharged and intercooled 4-cylinder diesel engine system in terms of scavenging efficiency and engine performance. To verify the computational results, experimental comparison has also performed.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.159-164
• /
• 2008

In diesel engine technology the drive to reduce emissions and fuel consumption with improved performance targets has led to many advances. In particular, Exhaust Gas Recirculation (EGR) and Variable Geometry Turbocharger (VGT) have played a key role in achieving these aims by permitting flexible control of the engine inlet gas charge. The full potential of these devices are difficult to achieve due to limitations in the classical control methods. However, fuzzy logic is particularly appealing due to its simple heuristic nature. The controller used in this work was designed using the Matlab Fuzzy Logic Toolbox. The overall object is to access the potential for emissions and fuel consumption reductions during transient events whilst maintaining and even improving driveability. Classical control methods (PID), as used on production engines, are examined and contrasted with an coordinated control that utilizes fuzzy logic.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.188-194
• /
• 2005

The direct injection diesel engine is one of the most efficient thermal engines. For this reason DI diesel engines are widely used for heavy-duty applications. But the world is faced with very serious problems related to the air pollution due to the exhaust emissions of diesel engine. So, that is air pollution related to exhaust gas resulted from explosive combustion should be improved. Exhaust Gas Recirculation(EGR) is a proven method to reduce NOx emissions. In this study, the experiments were performed at various engine loads while the EGR rates were set from $0\%$ to $30\%.$ The emissions trade-off and combustion of diesel engine are investigated. The brake specific fuel consumption rate is very slightly fluctuated with EGR in the range of experimental conditions. The ignition delay increased with increasing EGR rate. The maximum value of premixed combustion for the rate of heat release is increased with increasing EGR rate. NOx emissions are decreased with increasing EGR rate at high load and high speed. It was found that the exhaust emissions with the EGR system resulted in a very large reduction in oxides of nitrogen at the expense of higher smoke emissions.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.151-158
• /
• 2007

The static and dynamic behaviour of VGT and EGR systems has a significant impact on overall engine performance, fuel economy and exhaust emissions. This is because they define the state and composition of the air charge entering the engine. This work focused on the effect of the aperture ratio of VGT and EGR on the emission and flow characteristics under partial loads conditions. The investigation carried out using 2 liter PCCI 4 cylinder diesel engine with VGT and EGR. The result of this study shows that smoke increases with increasing EGR rate and NOx decreases with increasing EGR rate. It was also found that the residual gas contents greatly impact on soot emission under partial load condition. Finally, it can be concluded that VGT and EGR aperture ratio can greatly impact not only on soot and NOx but also air charging.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.899-905
• /
• 2000

The characteristics of air flow and engine performance with swirl ratio variance of intake port In a turbocharged DI diesel engine was studied in this paper. The intake port flow is important factor which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. The swirl ratio for ports was modified by hand-working and measured by impulse swirl meter. For the effects on performance and emission, the brake torque and brake specific fuel consumption were measured by engine dynamometer and NOx, smoke were measured by gas analyzer and smoke meter. As a result of steady flow test, when the valve eccentricity ratio are closed to cylinder wall, the flow coefficient and swirl intensity are increased. And as the swirl ratio is increased, the mean flow coefficient is decreasing, whereas the gulf factor is increasing. Also, through engine test its can be expected to meet performance and emission by optimizing the main parameters; the swirl ratio of intake port, injection timing and compression ratio.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.4745-4750
• /
• 2011

본 연구에서는 터보과급기 테스트 벤치, 실시간용 소프트웨어와 DAQ의 HIL 플랫폼, 그리고 Matlab/ Simulink로 작성한 엔진 모델로 구성된 HIL 시스템을 구축하고, HIL 시스템의 정상 작동 여부를 파악하기 위해 연료 공급량을 단계적으로 변화시키는 시뮬레이션을 수행하였다. 연료 공급량을 1.8944 kg/h와 4.7360 kg/h 사이에서 단계적으로 변화시키고, 시스템이 설정된 목표 공연비 32를 추종하는지 여부를 분석하였다. 시뮬레이션의 결과 연료 공급량을 변화시킨 상태에서 20초 정도의 시간이 경과한 후 설정된 목표 공연비에 정상적으로 수렴하였다. 또한 연료 공급량의 변화에 따라 터빈 베인 듀티비와 압축기의 부스트 압력도 적절하게 변화함을 확인하였다. 따라서 본 시스템은 터보과급기 개발 및 성능 개선에 유용하게 사용될 수 있을 것으로 기대된다.