• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.371-388
• /
• 2023

A stratum with a complex composition and a distributed low-permeability soil layer is difficult to remediate quickly because the soil remediation does not proceed easily. For efficient purification, the permeability should be improved and the soil remediation agent (H₂O₂) should be injected into the contaminated section to make sufficient contact with the TPH (Total petroleum hydrocarbons). This study analyzed a method for crack formation and effective delivery of the soil remediation agent based on pneumatic fracturing, plasma blasting, and vacuum suction (the PPV method) and compared its improvement effect relative to chemical oxidation. A demonstration test confirmed the effective delivery of the soil remediation agent to a site contaminated with TPH. The injection amount and injection time were monitored to calculate the delivery characteristics and the range of influence, and electrical resistivity surveying qualitatively confirmed changes in the underground environment. Permeability tests also evaluated and compared the permeability changes for each method. The amount of soil remediation agent injected was increased by about 4.74 to 7.48 times in the experimental group (PPV method) compared with the control group (chemical oxidation); the PPV method allowed injection rates per unit time (L/min) about 5.00 to 7.54 times quicker than the control method. Electrical resistivity measurements assessed that in the PPV method, the diffusion of H₂O₂2 and other fluids to the surface soil layer reduced the low resistivity change ratio: the horizontal change ratio between the injection well and the extraction well decreased the resistivity by about 1.12 to 2.38 times. Quantitative evaluation of hydraulic conductivity at the end of the test found that the control group had 21.1% of the original hydraulic conductivity and the experimental group retained 81.3% of the initial value, close to the initial permeability coefficient. Calculated radii of influence based on the survey results showed that the results of the PPV method were improved by 220% on average compared with those of the control group.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.389-401
• /
• 2023

Climate, weather, insolation (solar radiation), and solar energy in major cities of Tajikistan were investigated prior to construction of infrastructure for the Dushanbe Solar Station. In Dushanbe city there was a 70% probability of sunny days from May 16 to October 23, a period of 5.2 months. August had the most sunny days of in the year, with 99% probability of a sunny, the cloudiest month was February with a 41% chance of being sunny. In major cities of the Sughd and Gorno-Badakhshan states, the average number of cloudy days per month was ~3.3, with Dzhauz having 53 day and Fedchnko Glacier 79 days. For the 18 major cities of Tajikistan, the average annual total solar radiation was 2,429 W/m², and the average monthly solar radiation was 202 W/m². The city with the lowest annual total and monthly average solar radiation was Shartuz in Sughd state, with values ~2.7% less than the national average. The cities with the highest annual total and monthly average solar radiation were Khorog and Jirgatol in Gorno-Badakhshan state, with values ~10% above the national average. The daily average incident shortwave solar energy in the cities Dushanbe, Karakul, and Jirgatol was ~7.8 kWh per 2.4 m² during summer (May-August), and 2.7 kWh during winter (November-February), or ~35% that of summer.

• Ecology and Resilient Infrastructure
• /
• v.10 no.3
• /
• pp.85-96
• /
• 2023

The study involved the categorization of domestic lakes located in South Korea into three groups based on their salinity levels: upstream reservoirs with salinity less than 0.3 psu, estuarine reservoirs with salinity ranging from 0.3 to 2 psu, and brackish lagoons with salinity exceeding 2 psu. Subsequently, the research assessed variations in the concentrations of total nitrogen (T-N) and total phosphorus (T-P) in the sediment of these lakes using statistical analysis, specifically one-way analysis of variance (ANOVA). Additionally, a laboratory core incubation test was conducted to investigate the benthic nutrient fluxes in Songji lagoon (salinity: 11.80 psu), Ganwol reservoir (salinity: 0.73 psu), and Janggun reservoir (salinity: 0.08 psu) under both aerobic and anoxic conditions. The findings revealed statistically significant differences in the concentrations of T-N and T-P among sediments in the lakes with varying salinity levels (p<0.05). Further post-hoc analysis confirmed significant distinctions in T-N between upstream reservoirs and estuarine reservoirs (p<0.001), as well as between upstream reservoirs and brackish lagoons (p<0.01). For T-P, a significant difference was observed between upstream reservoirs and brackish lagoons (p<0.01). Regarding benthic nutrient fluxes, Ganwol Lake exhibited the highest diffusive flux of NH₄⁺-N, primarily due to its physical characteristics and the inhibition of nitrification resulting from its relatively high salinity. The flux of NO₃^--N was lower at higher salinity levels under aerobic conditions but increased under anoxic conditions, attributed to the impact of salinity on nitrification and denitrification. Additionally, the flux of PO₄^3--P was highest in Songji Lake, followed by Ganwol Lake and Janggun Reservoir, indicating that salinity promotes the diffusive flux of phosphate through anion adsorption competition. It's important to consider the influence of salinity on microbial communities, growth rates, oxidation-reduction processes, and nutrient binding forms when studying benthic diffusive nutrient fluxes from lake sediments.

• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.281-298
• /
• 2023

Continuous research efforts are being devoted to unmanned mobile platforms for lunar exploration. There is an ongoing demand for real-time information processing to accurately determine the positioning and mapping of areas of interest on the lunar surface. To apply deep learning processing and analysis techniques to practical rovers, research on software integration and optimization is imperative. In this study, a foundational investigation has been conducted on real-time analysis of virtual lunar base construction site images, aimed at automatically quantifying spatial information of key objects. This study involved transitioning from an existing region-based object recognition algorithm to a boundary box-based algorithm, thus enhancing object recognition accuracy and inference speed. To facilitate extensive data-based object matching training, the Batch Hard Triplet Mining technique was introduced, and research was conducted to optimize both training and inference processes. Furthermore, an improved software system for object recognition and identical object matching was integrated, accompanied by the development of visualization software for the automatic matching of identical objects within input images. Leveraging satellite simulative captured video data for training objects and moving object-captured video data for inference, training and inference for identical object matching were successfully executed. The outcomes of this research suggest the feasibility of implementing 3D spatial information based on continuous-capture video data of mobile platforms and utilizing it for positioning objects within regions of interest. As a result, these findings are expected to contribute to the integration of an automated on-site system for video-based construction monitoring and control of significant target objects within future lunar base construction sites.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.1
• /
• pp.37-50
• /
• 2023

Background: This study investigated the structural relationships among justice, test anxiety, and school reliability s non-face-to-face tests of dental hygiene students. Methods: A survey was conducted with 267 dental hygiene students. The survey items included general characteristics, opinions on evaluation, the fairness of non-face-to-face tests (distributive, procedural, and interactional justice), school satisfaction, and school reliability. For statistical analysis, independent-sample t-tests, one-way ANOVA, and structural modeling analyses were performed. Results: Among factors that directly affected distributive justice and reliability towards non-face-to-face tests, the higher the interactional justice (β=0.401, p<0.001) and distributive justice (β=0.232, p=0.002) levels, the higher the school satisfaction. The higher the school satisfaction (β=0.606, p<0.001) and procedural justice (β=0.299, p<0.001) levels, the higher the perceived reliability of the school. Factors that indirectly affected school reliability included interactional justice (β=0.243, p=0.010) and distributive justice (β=0.141, p=0.010). Interactional justice (β=0.592, p=0.010) and distributive justice (β=0.208, p=0.010) were the factors affecting school satisfaction. Moreover, factors that influenced school reliability were distributive justice (β=0.56, p=0.010), interactional justice (β=0.332, p=0.010), procedural justice (β=0.229, p=0.010), and distributive justice (β=0.116, p=0.010). Conclusions: Students will trust and be satisfied with schools when schools and professors sufficiently provide information on face-to-face tests and ensure proper procedures to achieve reasonable grades as rewards for exerted time and effort. Furthermore, this study provides a reference base for developing a variety of content for fair, non-face-to-face tests, thereby allowing students to trust their schools.

• Journal of the Daesoon Academy of Sciences
• /
• v.33
• /
• pp.319-349
• /
• 2019

This study aims to elucidate the origin and yield of life and its characteristics and purpose in Daesoon Thought. Thereby, Taegeuk (the Great Ultimate) and Sangje (the Supreme God) have been deemed the source and ontology of life. The structure of each living creature is explained through reason (理), energy (氣) and spirit (神). In addition, through vital reason and living energy, the purpose of life makes the realization of the benevolent characteristics of life possible through the mind of Sangje. This line of research is unique among currently available research views of life as it perceives the spirit to be an ontological entity with functions and interactive engagement. By way of contrast, prior research suggests that spirit is life itself and includes it in the category of life and death. The Daesoon view of life is unique in that it is somewhat influenced by ontology and developmental theories from Confucianism, yet the concept of divine beings suggests a humanistic Sangje, who presides over the Great Ultimate. The realization of reason in this model is rather thought-provoking. Humans, just like other living things, are born with vital essence and function and interact as a main source to preside over the innate spirits inside themselves. Humans take responsibility for a certain sphere in the Three Realms that make up the world. They are also recognized as a significant feature in the world. Such an idea in Daesoon Thought depicts that 'the enshrinement of spirit into human being (神封於人),' follows Heaven and Earth. This is done to rectify humans in order to meet the needs of the universe and ultimately establish the era of the enshrinement of spirits into human beings. As for humanity, this possibility exists because of the spirits contained within their inner-selves. When cultivating oneself, humans and outer spirits actively interact with each other. This is likely to cause changes in a human's constitution and characteristics. In the end, one can be enshrined with corresponding divine beings according to one's degree of cultivation. Humans are born through the command of Sangje and the accomplishments of their ancestors as well as the energy of the universe. Present day humans encounter the era of human nobility and the era of humankind's divine salvation. Thereby, the purpose of human life is to contribute to the universe. To achieve this goal, the most important thing is to wholly realize that one's nature and reason were endowed by Heaven, which emerged from virtuous conduct in society. This is also akin to the movement of reason in Jeungsanist Thought. Sangsaeng (mutual beneficence) among oneself and others and between human beings and divine beings can be completed through the resolution of grievances for mutual beneficence and the grateful reciprocation of favors for mutual beneficence. If one accomplishes the perfected state of one's own nature and reveals it wholly, then one will be fully able to interact with spirits and reach the state of the human nobility.

• Journal of the Daesoon Academy of Sciences
• /
• v.32
• /
• pp.31-76
• /
• 2019

Lee Sang-ho published Jeungsan Cheonsa Gongsagi (Records of the Holy Works of Celestial Master Jeungsan) in 1926. Then, after complementing the book with additional materials, he published Daesoon Jeon-gyeong in the form of a religious scripture. Since then, Daesoon Jeon-gyeong has been expanded to a sixth edition which was published in 1965. The Haengnok of Daesoon Jinrihoe's The Jeon-gyeong, which was published decades later than Daesoon Jeon-gyeong describes Sangje's whole life year by year in five chapters starting from his descent to the human world all the way to his passing into heaven. It comprehensively contains the essential contents of other chapters from The Jeon-gyeong. This paper was written for the following three goals: first, to study the contents of Haengnok that summarize Sangje's life. Second, to see how its contents are related to descriptions from the other six chapters. Lastly, to discuss how certain verses have been changed from the way they appeared Daesoon Jeon-gyeong. When we compare these two scriptures, there are some verses that are found only in the Haengnok section of The Jeon-gyeong. For example, the verse that explains how Sangje's family name 'Kang' originated and how his ancestors came to live in Gobu area is described only in The Jeon-gyeong. The origin of the family name Kang is considered important because he descended into the world as a human bearing the family name Kang, and it is included in his official name that represents his divine position. Also, unique to The Jeon-gyeong are verses such as those describing "Samsin San (the three holy mountains) in the area where Sangje descended to and verses about the historical change of place names in the areas where Sangje lived. These verses have great significance in terms of their mystical aspects within Daesoon Thought. Secondly, the record about Sangje's Holy Works at Siru Mountain in The Jeon-gyeong is not found in Daesoon Jeon-gyeong. The Holy Works at Siru Mountain are important because they provide proof of Sangje's major activities during the period between his 3-year travel around the country and his Cheonji-gongsa (Reordering Works of the Universe). Next to be observed are some changes in verses that can be seen when comparing The Jeon-gyeong to Daesoon Jeon-gyeong. Of particular impostance here are the story of Sangje's Holy Work called 'King in White Cloth and General in White Cloth' and the description of Sangje's passing into heaven. Both records contain key changes that distinguish The Jeon-gyeong from Daesoon Jeon-gyeong.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.247-258
• /
• 2023

This study aims to investigate the enhancement of water resistance and improvement in adhesion to the skin by combining dextrin palmitate and isopropyl titanium triisostearate coating materials with titanium dioxide. Due to the recent increase in consumers who enjoy outdoor activities, the demand for sunscreen with excellent water resistance is increasing. Prior research was conducted with O/W, Pickering, and W/O/W multiple formulations, but there was a limit to water resistance. The purpose of this study is to develop a complex inorganic powder that can improve water resistance and increase adhesion to the skin to solve this problem. First, we combined dextrin palmitate and isopropyl titanium triisostearate coating materials to form a composite with titanium dioxide. The coating of the inorganic powder was confirmed using FE-SEM and FT-IR analysis. The composite exhibited significantly higher in vitro water resistance compared to other formulations. The hydrophobicity of the coated inorganic powder was compared by measuring the contact angles. When the coated inorganic powder was applied to the W/O sunscreen formulation and the non-coated inorganic powder was applied to the W/O sunscreen formulation as a control, the SPF of the sunscreen containing the coated inorganic powder was higher. These results were the same when observed with a UV camera. Finally the adhesion of the coated inorganic powder to the skin was assessed by applying it to a foundation product. In vivo study, it was observed that the product formulated with the coated powder exhibited less smudging compared to the foundation product formulated with the non-coated powder. The developed inorganic powder in this study demonstrated excellent adhesion to the skin, providing a superior sensory experience, as well as enhanced hydrophobicity and remarkable water resistance effects. In the future, the result of this study is expected to help develop various sunscreen products to improve water resistance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.42-53
• /
• 2023

This paper explores the recent development of environmental aesthetics and critically examines the main agendas, claims, issues, and implications of everyday aesthetics, which is emerging as an important branch of environmental aesthetics. Environmental aesthetics began in the context of cultural change and environmentalism in the 1960s and expanded in the second half of the 20th century with a solid theoretical foundation. At the beginning of the 21st century, it entered a process of diversification of objects and subjects. Having reached academic maturity, environmental aesthetics has expanded into theoretical territory considering the urban environment and the human environment, providing practical coordinates as a discourse for planning and designing urban environments and landscapes. The most notable achievement of environmental aesthetics since the mid-2000s is the establishment of 'everyday aesthetics'. Yuriko Saito, who is leading the research on everyday aesthetics, expanded the objects and scope of aesthetic theory to everyday objects, events, activities, and environments. She excavates the microscopic and sensory aspects of everyday life, which have been overlooked by conventional art-centered aesthetics, through the lens of aesthetics. She reinterprets various layers of phenomena in contemporary urban landscapes and analyzes how the 'power of the aesthetic' hidden in everyday life profoundly affects the quality of life and the state of the world. Saito examines the appreciation of the distinctive characteristics and ambiance inherent in everyday objects and environments and proposes a 'moral-aesthetic judgment' to alert citizens to the environmental, social, and political consequences of everyday aesthetic appreciation and response. This paper identifies the issues and implications of everyday aesthetics as first, the expansion of aesthetics and the ambiguous everyday, second, the moral-aesthetic judgment and the aesthetics of care, and third, urban regeneration landscapes and aesthetic literacy. In particular, the moral virtues of everyday aesthetics that Saito proposes, such as care, thoughtfulness, sensitivity, and respect, provide a critical reference for the practice of contemporary urban regeneration landscapes. The 'aesthetic literacy' is a key concept demonstrating why an environmental aesthetics perspective is necessary to interpret everyday urban environments and landscapes.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.44-51
• /
• 2022

In the steelmaking process using an electric arc furnace (EAF), light-burnt dolomite, which is a flux containing MgO, is used to protect refractory materials and improve desulfurization ability. Furthermore, a recarburizing agent is added to reduce energy consumption via slag foaming and to induce the deoxidation effect. Herein, a waste MgO-C based refractory material was used to achieve the aforementioned effects economically. The waste MgO-C refractory materials contain a significant amount of MgO and graphite components; however, most of these materials are currently discarded instead of being recycled. The mass recycling of waste MgO-C refractory materials would be achievable if their applicability as a flux for steelmaking is proven. Therefore, experiments were performed using a target composition range similar to the commercial EAF slag composition. A pre-melted base slag was prepared by mixing SiO₂, Al₂O₃, and FeO in an alumina crucible and heating at 1450℃ for 1 h or more. Subsequently, a mixed flux #2 (a mixture of light-burnt dolomite, waste MgO-C based refractory material, and limestone) was added to the prepared pre-melted base slag and a melting reaction test was performed. Injecting the pre-melted base slag with the flux facilitates the formation of the target EAF slag. These results were compared with that of mixed flux #1 (a mixture of light-burnt dolomite and limestone), which is a conventional steelmaking flux, and the possibility of replacement was evaluated. To obtain a reliable evaluation, characterization techniques like X-ray diffraction (XRD) analysis and X-ray fluorescence (XRF) spectrometry were used, and slag foam height, slag basicity, and Fe recovery were calculated.