• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.79-79
• /
• 2017

강우 자료는 수공구조물 설계목적에 따라 다양한 시공간적 범주가 필요하다. 그러나 시간단위 이하 시계열 강우자료는 미계측 유역 및 관측연한 등의 제약으로 연속적인 시계열을 확보하는데 어려움이 있다. 이러한 점에서 포아송분포 기반 강우발생모형은 강우시계열의 통계적 특성을 나타내는 5개 매개변수로 다양한 시간 범주의 연속강우시계열을 생성할 수 있다는 장점이 있다. 강우발생모의 핵심은 과거자료의 통계특성을 효과적으로 복원할 수 있어야 하며, 다양한 기상학적 특성들 또한 적절하게 모의될 수 있어야 한다는 점이다. 즉, 다음과 같은 기준으로 모의적합성을 평가할 수 있다. 첫째, 지속기간별 관측시계열과 모의시계열의 통계적 유사성을 평가하고, 둘째, 확률분포를 따르는 각 매개변수의 사후분포를 제시하여 불확실성을 정량화하고, 셋째, 추정된 매개변수의 물리적 범위의 적정성 검토가 필요하다. 본 연구에서는 강우발생모형으로 널리 알려진 Neyman-Scott Rectangular Pulse(NSRP) 모형과 Bayesian 모형을 연계한 Bayesian NSRP 모형 개발을 통해 강우관측소 전지점에 대한 매개변수 지도를 제시하고자 한다. 본 연구결과는 임의 유역에 대한 강우발생 시나리오를 제공하여, 다양한 형태의 유출결과를 도출할 수 있으며, 무엇보다 유출결과를 확률적으로 평가할 수 있다는 장점이 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.9-9
• /
• 2018

추계학적 강우생성모형 중 포아송 클러스터(Poisson Cluster) 모형은 단일지점에 대하여 시간강우량의 관측연한 문제점을 해결하기 위한 강우모형으로 강우 단계별 계층적 구조를 이해하는데 유용한 모형이다. 특히 강우 특성을 계절, 지역 등과 같이 비교하는 기준에 따라 5~6개의 비교적 적은 매개변수들로 모의 강우시계열을 생성할 수 있다는 점에서 장기간 강우분석에 필요한 관측연한 문제를 보완할 수 있다. 그러나 매개변수 최적해가 수렴되지 않는 사례가 많고, 매개변수들이 강우의 물리적 특성을 반영하는 것에 비해 내포된 불확실성에 관한 연구는 미흡하다. 본 연구에서는 포아송 클러스터 강우생성모형 중 Neyman-Scott Rectangular Pulse(NSRP) 모형을 Bayesian 모형과 연계한 Bayesian NSRP 모형을 개발하여 매개변수간 물리적 상관성을 고려한 최적화 기법을 개발하였다. Bayesian 모형은 물리적 범위가 다른 매개변수간의 결합확률분포를 산정하여 사후분포(posterior)를 추정하므로 매개변수 최적화와 불확실성 정량화 문제를 동시에 해결할 수 있다. 최종적으로 Bayesian NSRP 모형에 기후변화 시나리오의 통계적 특성을 고려한 시간단위 강우시계열 생성 모의 기법의 활용 가능성을 평가하고자 한다.

• Journal of Technologic Dentistry
• /
• v.45 no.1
• /
• pp.21-29
• /
• 2023

Purpose: This study attempted to collect basic data to improve the basic repair ability of university freshmen in a world where the usage of advanced medical devices related to computer programs is now common. Methods: The collected data from 280 university freshmen enrolled in nursing, dental, and health degrees or computer and engineering degrees at K university of Gangwon-do were analyzed using the t-test, ANOVA, correlation analysis, and linear regression analysis using the IBM SPSS Statistics ver. 21.0 (IBM). Results: The mathematical learning status and the detailed factors of basic mathematical ability had a positive (+) correlation. The factors of basic mathematical ability, psychology of learning (p<0.001), method of learning (p<0.001), and propensity to learn (p<0.05) were found to be statistically significant, and the model's explanatory power was 40.0%. Conclusion: As a result of this study and considering that advanced medical devices such as computer-aided design/computer-aided manufacturing and three-dimensional printers are becoming more common and up-to-date in clinical settings, it is determined that nursing and dental health students require education to improve their repair skills.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.85-91
• /
• 2024

To realize stable use of ground treated with cementitious materials, the curing process must be evaluated. In this study, a time domain reflectometry (TDR) measurement system was employed to evaluate the curing process of cementitious grout based on the electromagnetic property. A coated probe was manufactured to prevent electrical connection between the electrodes by the electrically conductive cementitious grout, and a calibration process was performed to estimate the actual relative permittivity using the coated probe. To assess the curing process of cementitious grout using the TDR measurement system, cementitious grout with added retarder was prepared with a water-to-cement ratio of 45%. A preliminary measurement was conducted immediately after pouring the cementitious grout into the mold to test the applicability of the coated probe, and TDR signals and relative permittivity were measured at 3~288 hours of curing time. The experimental results demonstrate that the relative permittivity of the cementitious grout immediately after pouring was greater than 100, decreased rapidly over time, and converged to approximately 13.8 at 144 hours, which is considered the fully cured time. This findings of this study demonstrate that the TDR measurement system with a coated probe is applicable to electrically conductive materials. In addition, the TDR measurement system can be used effectively to monitor the curing process of cementitious grout based on electromagnetic properties.

• Proceedings of the Korea Database Society Conference
• /
• 1999.06a
• /
• pp.271-280
• /
• 1999

인공신경망을 시계열예측에 적용하는 경우에 고려되어야 할 문제중, 특히 모형에 적합한 입력변수의 생성이 중요시되고 있는데, 이러한 분야는 인공신경망의 모형생성과정에서 입력변수에 대한 전처리기법으로써 다양하게 제시되어 왔다. 가장 최근의 입력변수 전처리기법으로써 제시되고 있는 신호처리기법은 전통적 주기분할처리방법인 푸리에변환기법(Fourier transforms)을 비롯하여 이를 확장시킨 개념인 웨이블릿변환기법(wavelet transforms) 등으로 대별될 수 있다. 이는 기본적으로 시계열이 다수의 주기(cycle)들로 구성된 상이한 시계열들의 집합이라는 가정에서 출발하고 있다. 전통적으로 이러한 시계열은 전기 또는 전자공학에서 주파수영역분할, 즉 고주파 및 저주파수를 분할하기 위한 기법에 적용되어 왔다. 그러나, 최근에는 이러한 연구가 다양한 분야에 활발하게 응용되기 시작하였으며, 그 중의 대표적인 예가 바로 경영분야의 재무시계열에 대한 분석이다 전통적으로 재무시계열은 장, 단기의사결정을 가진 시장참여자들간의 거래특성이 시계열에 각기 달리 가격으로 반영되기 때문에 이러한 상이한 집단들의 고유한 거래움직임으로 말미암아 예를 들어, 주식시장이 프랙탈구조를 가지고 있다고 보기도 한다. 이처럼 재무시계열은 다양한 사회현상의 집합체라고 볼 수 있으며, 그만큼 예측모형을 구축하는데 어려움이 따른다. 본 연구는 이러한 시계열의 주기적 특성에 기반을 둔 신호처리분석으로서 기존의 시계열로부터 노이즈를 줄여 주면서 보다 의미 있는 정보로 변환시켜 줄 수 있는 웨이블릿분석 방법론을 새로운 필터링기법으로 사용하여 현재 많은 연구가 진행되고 있는 인공신경망과의 모형결합을 통해 기존연구와는 다른 새로운 통합예측방법론을 제시하고자 한다. 본 연구에서 제시하는 통합방법론은 크게 2단계 과정을 거쳐 예측모형으로 완성이 된다. 즉, 1차 모형단계에서 원시 재무시계열은 먼저 웨이블릿분석을 통해서 노이즈가 필터링 되는 동시에, 과거 재무시계열의 프랙탈 구조, 즉 비선형적인 움직임을 보다 잘 반영시켜 주는 다차원 주기요소를 가지는 시계열로 분해, 생성되며, 이렇게 주기에 따라 장단기로 분할된 시계열들은 2차 모형단계에서 신경망의 새로운 입력변수로서 사용되어 최종적인 인공 신경망모델을 구축하는 데 반영된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.429-439
• /
• 2000

Various wastewater treatment technologies were applied for decolorization and disposal of the wastewater containing the pigments, which consist of Lake Red C(Barium) or/and Lithol Rubine(Calcium) pigments. In an application of ozonation $COD_{Mn}$ was generally decreased with an increase of amounts of ozone applied, however, the decolorization effect was not that good except for Lithol Rubine series. In an application of Fenton oxidation and electrochemical process, a good $COD_{Mn}$ removal effect for all the pigment wastewater and a slight decolorization effect for a part of Lithol Rubine series were observed. In an application of ultra filtration(UF) and reverse osmosis(RO), an excellent $COD_{Mn}$ removal and decolorization(almost 100%) effects of all the pigment wastewater were observed. Thus the water treated by the UF and RO could be reusable and thus save operating costs of the pigment manufacturing plants.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.147-152
• /
• 2009

In this study, the applicability of alginate-immobilized Pseudomonas putida mt-2 KG1206 on the environments, contaminated with toluene analogs was conducted. Genetically engineered strain KG1206 produces light by direct (m-toluate, benzoate) and indirect (toluene, xylenes) inducers. The protocol for the alginate-immobilization was determined in terms of the cell to alginate ratio, solution, proper number of alginate beads, and other conditions. Maximum bioluminescences of five chemicals by immobilized strain were generally observed in following orders: m-toluate > p-xylene > toluene > o-xylene > m-xylene. In relationship between bioluminescence activity and inducer reduction, initial m-toluate (5 mM) in solution was removed approximately 48% of initial at 5 h exposure, showing continuous decrease of inducer chemical in solution. These results of study with alginate-immobilized beads would be useful, especially, for biomonitoring of contaminated environments with specific compounds, such as petroleum hydrocarbon compounds including toluene analogs.

• Journal of KIISE:Software and Applications
• /
• v.32 no.9
• /
• pp.835-846
• /
• 2005

A Product Line (PL) is a set of products (applications) that share common assets in a domain. Product Line Engineering (PLE) is a set of principles, techniques, mechanisms, and processes that enables the instantiation of produce lines. Core assets, the common assets, are created and instantiated to make products in PLE. Model Driven Architecture (MDA) is a new software development paradigm that emphasizes its feasibility with automatically developing product. Therefore, we can get advantages of both of the two paradigms, PLE and MDA, if core assets are represented as PIM in MDA with predefined automatic mechanism. PLE framework in the PIM level has to be interpreted by MDA tools. However, we do not have a standard UML profile for representing core assets. The research about representing PLE framework is not enough to make automatically core assets and products. We represent core asset in PIM level in terms of structural view and semantic view. We also suggest a method for representing architecture, component, workflow, algorithm, and decision model. The method of representing framework with PLE and MDA is used to improve productivity, applicability, maintainability and qualify of product.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.1-11
• /
• 2010

In this study, To analyzed the monthly long-term change characteristics of Chukwooki rainfall data set (CWK) and modern rain gage rainfall data set (MRG), tests of trend or variation were performed of each data sets using five statistical trend or variation test method. furthermore, changing characteristics of rainfall was analyzed through the accomplishment of the 2-dimensional LOWESS regression (or smoothing) which can consider both annual time-variation and inter-monthly time-variation. From the trend test, it is difficult to confirm that given data sets have significant trends. From the 2-dimensional LOWESS analysis for four rainfall characteristics, after near A.D. 1980, inter-monthly variation width in addition to quantative increment of rainfall are increased rapidly and persistently.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.344-351
• /
• 2019

The purpose of this study was to obtain the basic data for developing more advanced courses on character education by surveying and analyzing the perception and demands of character education of university students and further, to provide useful information for creating institutional protocol on character education. The study was conducted from April 2018 to May 2018 on students attending the departments of non-health science and health science university students. A total of 206 students participated in this study, and all the students in the non-health science and health science departments were found to be highly aware of the need for character education, its importance and the possibility of personality development through learning. Students from all the departments showed high levels on average in terms of self-understanding according to their personality abilities, and especially their high levels of 'consideration' and 'responsibility'. For the differences in perception of self-efficacy, the lowest level of recognition was for 'will' and the average values were not high. In their response to personality level, all students answered that their personality was 'high' (42.1%), and that the personality education courses at the schools they are currently attending were 'not satisfied' with both the non-health science and health science students. As a result, there were higher results overall for the health science students than that for the non-health science students, but there were not many significant differences. To this end, education institutes will have to prepare conditions for university students to cultivate their expertise in character, while at the same time helping them grow into human beings with the qualities demanded by society. In addition, the government should establish curriculums and content by accurately identifying the needs of character education and devising concrete measures for their implementation, and by more faithfully considering quantitative and qualitative context types for the content base of character education.