• Design Convergence Study
• /
• v.16 no.4
• /
• pp.1-16
• /
• 2017

As the local manufacturing industry has entered a phase of stagnation, service and product design based on user experience has been highlighted as an alternative for the innovation. However, SMEs(Small and Medium-sized Enterprises) are still struggling to overcome the current crisis. One of the reasons is that SMEs do not have enough contact points with the validated UX firms and experts. Thus, SMEs has a high barrier to invest in new opportunity area, user experience. In this study, we aim to figure out UX experts' competence to perform the UX method to solve the UX problems based on the KSA framework(Knowledge, Skill, Attitude). Based on the literature review and expert workshop, we grouped the UX method according to the similarity of the competence required to conduct the method. With cluster analysis, 5 different groups of UX method were defined based on the competence, Panoramic Analysis, Meticulous Observation and Analysis, Intuitive Interpretation, Agile Visualization, and Logical Inspection. The results would be applied to compose a portfolio of UX experts and to implement a mechanism that could recommend the professional experts to the company.

• Resources Recycling
• /
• v.32 no.2
• /
• pp.19-32
• /
• 2023

A novel method for the synthesis of titanium hydride powder from titanium tetrachloride via the magnesiothermic reduction in an hydrogen gas atmosphere was investigated. To examine the influence of temperature on the formation of titanium hydride, the reduction was conducted at 1023~1123 K under 1 atm of hydrogen gas atmosphere for approximately 30 min. Subsequently, the titanium hydride powder was sintered by maintaining the temperature for 0~120 min, and the decrease in the oxygen concentration of the powder was investigated. The experimental results showed that TiH_1.924 was produced at 1023 K, whereas mixtures of TiH_1.924 and TiH_1.5 were produced at 1073 K and 1123 K. In addition, the hydrogen concentration in the powder decreased with increasing temperature. The concentration of oxygen in the powder decreased with increasing temperature and sintering time owing to the decrease in the specific surface area of the powder. The minimum concentration of oxygen was 0.246 mass% when the mixture of TiH_1.924 and TiH_1.5 was obtained at 1073 K and a sintering time of 120 min.

• Clean Technology
• /
• v.29 no.2
• /
• pp.95-101
• /
• 2023

An experiment was conducted to produce vaterite-type precipitated calcium carbonate from waste oyster shells in order to use them as recyclable resources. Calcined oyster shells containing calcium oxide as their main component were prepared at a temperature of 800℃ for 24 h. The oyster shells were dissolved in nitric acid or hydrochloric acid solution to make 0.1 M calcium nitrate or calcium chloride aqueous solution, and a carbonation reaction was performed using a 0.1 M sodium carbonate aqueous solution under various experimental conditions, which included varying the amount of aspatic acid additive, the amount of NH₄OH added, the reaction time, the reaction temperature, the stirring speed, and the type of dissolved acid. The XRD, SEM, and size distributions were analyzed and the vaterite content was calculated. Spherical precipitated calcium carbonate with a vaterite content of 95.9% was synthesized by adding 0.1 mol aspatic acid/1 mol CaO and 2 cm³ of NH₄OH, and reacting for 1 h at 25℃ while stirring at 600 rpm. The average particle diameter was found to be 12.11 ㎛. Calcium carbonate contatining high vaterite is used as high value added calcium carbonate for medical, food, inke additiver, etc.

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.335-353
• /
• 2023

Site selection processes for high-level radioactive waste disposal facilities in different countries differ in terms of local geology and degree of public engagement. There seem to be three alternative processes for site selection: (1) selection with community consent after government choice; (2) selection with continuous community engagement after exclusion of unsuitable areas based on existing survey data; or (3) site selection where communities have expressed a willingness to participate. The Yucca Mountain site in Nevada, USA, was selected as the final disposal site by process (1) through six stages, but its development was suspended owing to opposition from the local governor and environmental groups. In Sweden, Switzerland, and Germany, process (2) is used and sites are selected through three stages. Sweden and Switzerland have completed site selection, and Germany is currently engaged in the process. The UK adopted process (3) with six stages, although the process has been suspended owing to poor community participation. In Korea, temporary storage facilities for spent nuclear fuel will reach saturation from 2030, so site selection must be promoted through various laws and systems, with continuous communication with local communities based on transparent and scientifically undertaken procedures.

• Journal of Marine Life Science
• /
• v.1 no.1
• /
• pp.31-40
• /
• 2016

Macrofauna and community structure were investigated seasonally at five sites in subtidal zone of Uljin on the east coast of Korea from March 2010 to February 2013. A total of 146 species were collected and identified, including 67 molluscs, 27 arthropods, and 8,688 individuals, including 6,468 arthropods, 1,098 molluscs and 584 echinoderms. In the seasonal investigation, summer has been the highest in 96 species and 2,525 number of individuals. Site 4 was the highest species but number of individuals were the lowest (81 species with 1,377 number of individuals), whereas site 3 was the lowest species and number of individuals were the highest (45 Species with 2,213 number of individuals). These result indicate that Balanus species affected to richness and the other side a gastropod influence by diversity and evenness. And site 3 seems to be good habitate environment for Balanus as the result of 83.4% of Balanus rather than other sites.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1D
• /
• pp.79-87
• /
• 2010

The urban street has been escaped from functional and uniformed arrangement for merely movement to the space which can take the role of cozy and familiar culture. Therefore I tried to prepare a plan for the wide roads having streetscape which reveal area's identity as well as coziness and convenience by grasping the problem and its solution through analysing and deducing various elements with the subject of streetscape among urban landscape components, especially composing wide road's streetscape. First of all, this study made a simulation by deducing components of wide road's streetscape and controlling them with theoretical review of streetscape and consideration of wide road's local characteristic. With the evaluation on the base of them, that following four components could be the representative things of entrance part was confirmed by this study. They were familiar streetscape,symbolic scene as as an entrance gate, continuous and dynamic streetscape, and interesting and pleasant streetscape. And for the middle part, those four components could represent the wide road's streetscapeI were confirmed. They were familiar streetscape, safe and tender streetscape, pleasant and dynamic streetscape, and symbolic streetscape. It seems that the components of the streetscape obtained from the analysis of this study are utilized as reference data in the case of a future streetscape design conclusively.

• The Journal of Bigdata
• /
• v.8 no.1
• /
• pp.49-59
• /
• 2023

There are various items in the safety and health standards of the manufacturing industry, but they can be divided into work-related diseases and musculoskeletal diseases according to the standards for sickness and accident victims. Musculoskeletal diseases occur frequently in manufacturing and can lead to a decrease in labor productivity and a weakening of competitiveness in manufacturing. In this paper, to detect the musculoskeletal harmful factors of manufacturing workers, we defined the musculoskeletal load work factor analysis, harmful load working postures, and key points matching, and constructed data for Artificial Intelligence(AI) learning. To check the effectiveness of the suggested dataset, AI algorithms such as YOLO, Lite-HRNet, and EfficientNet were used to train and verify. Our experimental results the human detection accuracy is 99%, the key points matching accuracy of the detected person is @AP0.5 88%, and the accuracy of working postures evaluation by integrating the inferred matching positions is LEGS 72.2%, NECT 85.7%, TRUNK 81.9%, UPPERARM 79.8%, and LOWERARM 92.7%, and considered the necessity for research that can prevent deep learning-based musculoskeletal diseases.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.285-297
• /
• 2023

The present study aims to investigate the acoustic performance of the creative convergence classrooms in Korea used by elementary school students under the age of 9 introduced through the school space innovation project. In order to do this, acoustic performances of three creative convergence classrooms were measured. The measured acoustic parameters were background noise levels, Reverberation Time (RT), D₅₀, Speech Transmission Index (STI), and Inter-Aural Cross Correlation (IACC). Also, acoustic parameters including Transmission Loss (TL) and standardized level difference (D_nT) have been measured for the analysis of sound insulation performance of walls. In addition, the noise level was measured according to the opening conditions of doors and windows in the classroom. As a result, background noise level was measured at an average of 28.0 dB(A) to 32.8 dB(A) when the air conditioner was not operated, and the RT did not exceed 0.6 s. There were differences in IACC according to various desk layouts, and IACC values were high in the center line and the seats near the sound source. In particular, higher IACC was measured at the seats on the center line facing the source squarely. Regarding noise level in the classroom according to the opening conditions of doors and windows, the standards were exceeded when all windows, or windows and doors front onto the corridor were opened.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.1
• /
• pp.40-50
• /
• 2023

Quality control (QC) is an essential work for the successful construction project execution. Recently, robust application of ICT to the QC tasks leads to utilizing innovative technologies and equipment. However, overall planing of QC works needs to take place before applying new technologies to each and individual QC task. The objectives of this research involve developing a database and an algorithm that identifies QC tasks and related information upfront. In addition, the researchers developed a methodology to generate inspection tasks in conjunction with construction work tasks. The Korean Ministry of Land and Transportation provides standard supervision checklists. They were classified based on criteria of inspection items, methods, period and the scope. Reinforced concrete work was selected as a case study for validation of the method. This framework can function when planing construction tasks with any type of planning tools and innovative technologies. The researchers expect this framework may contribute to various construction projects when developing QC plans and tasks with applicable technologies.

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.223-232
• /
• 2023

A widely used method for monitoring land cover using high-resolution satellite images is to classify the images based on the colors of the objects of interest. In urban areas, not only major objects such as buildings and roads but also vegetation such as trees frequently appear in high-resolution satellite images. However, the colors of vegetation objects often resemble those of other objects such as buildings, roads, and shadows, making it difficult to accurately classify objects based solely on color information. In this study, we propose a method that can accurately classify not only objects with various colors such as buildings but also vegetation objects. The proposed method uses the normalized difference vegetation index (NDVI) image, which is useful for detecting vegetation objects, along with the RGB image and classifies objects into subclasses. The subclass classification results are fused, and the final classification result is generated by combining them with the image segmentation results. In experiments using Compact Advanced Satellite 500-1 imagery, the proposed method, which applies the NDVI and subclass classification together, showed an overall accuracy of 87.42%, while the overall accuracy of the subchannel classification technique without using the NDVI and the subclass classification technique alone were 73.18% and 81.79%, respectively.