• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.168-169
• /
• 2001

1.55 $\mu\textrm{m}$ 파장 대역에서 동작하는 파장가변 단일 주파수 레이저는 WDM 통신 시스템, 광섬유 센서, 분광학 분야에 유용하게 사용될 수 있다. 특히 어븀첨가 광섬유 레이저로 파장가변 단일 주파수 레이저를 구현하면 선폭이 가늘고, 세기 잡음이 작고, 출력 세기가 크다는 장점이 있기 때문에 많은 연구가 있어 왔다. 본 논문에서는 음향광학 대역투과 필터 (acousto-optic tunable bandpass filter, AOTBF)와 광섬유 흡수 격자를 사용하는 선형공진기 형태의 파장가변 단일 주파수 광섬유 레이저에 대해서 제안하고 구현하였다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.61-66
• /
• 2014

We report the characterization of a wavelength-swept laser (WSL) using a polygon-based wavelength scanning filter and two semiconductor optical amplifiers (SOAs). The output intensity and scanning bandwidth of the WSL depend on the position of the two SOAs in the laser cavity and the coupling ratio of the output fiber coupler. The outputs of the WSL are characterized for coupling ratios of 10%, 30%, 50%, 70%, and 90% for the output fiber coupler. In the setup in which the output fiber coupler is located between the two SOAs, high output power and wide scanning bandwidth can be achieved with an optimized configuration. Using the optimized configuration of the WSL, the intensity increases with the coupling ratio. These results can be used to construct an optimized WSL using the polygon-based wavelength scanning filter.

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.102-107
• /
• 2011

In this paper, a small double ring resonator reflector was designed and fabricated using a polymer waveguide, and the measurement result was discussed. A widely tunable characteristic of the small double ring resonator caused by the Vernier effect, which results from the difference of the ring radii, was observed. The insertion loss of the double ring reflector was reduced by minimizing the device length to be as short as possible, and thus the output power and the SMSR (side mode suppression ratio) was greatly enhanced. The hybrid integrated laser based on the small double ring resonator reflector lased with the SMSR of 45 dB. In addition, the wide tuning range of 40 nm could be obtained by injecting a current of 30 mA to an electrode on top of the reflector.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1220-1225
• /
• 2009

In this paper, a tunable fiber feedback laser based on the use of Sagnac loop filter and fiber Bragg grating (FBG) is proposed. The Sagnac loop filter using a high birefringence fiber provides precise 0.33-nm channel spacing as a multi-wavelength grid filter. Ni-Cr wire wound on the FBG is useful to induce the thermo-optic effect of the fiber. Two types of FBG structures, which have a different length of wire, are demonstrated to show the wavelength shift and separation. To tune FBG by resistant heat, some current is supplied into the wire. When the wavelength matched with one of the cavity modes of Sagnac loop filter, the mode-locked lasing is occurred. The electrical power sensitivity of the resonant wavelength is measured to 1.75pm/mW. This laser configuration can be applied the electrical power system for monitoring the power fluctuation.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1823-1825
• /
• 2001

고리형 반도체-광섬유 레이저 공진기 안에 높은 복굴절률을 가지고 있는 편광 유지 광섬유 루프 거울을 삽입하여 새로운 구조의 다파장 발진 시스템을 제안하고 구현하였다. 이득 매질인 반도체 광 증폭기의 특성으로 인해 실온에서 파장 간격이 1 nm 이내인 22 개의 파장의 빛을 발진시킬 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.419-423
• /
• 1999

Optical filters utilizing the evanescent filed coupling between the side polished fiber and polymer planar waveguide were fabricated and optical properties of the devices were measured. A scheme for reducing polarization dependent properties of the device was proposed and demonstrated experimentally. Our measurement results showed that resonance wavelengths and filtering depth of the optical filters can be determined by adjusting thickness of planar waveguide and polishing depth of the fiber. The device fabrication procedure including fiber polishing steps and formation of polymer planar waveguide were described. The optical characteristics of fabricated optical filers were that 3 dB bandwidth was 15 nm, the resonance wavelength difference between the TE and TM polarized response was less then 2 nm, and insertion loss was less then 0.2 dB. The measured resonance wavelength drift dut to the variation of ambient temperature was -0.35 nm/$^{\circ}C$.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.92-96
• /
• 2003

Dielectric apertures in vertical cavity laser have been used for improved device performance. Numerical analysis is used to estimate the optical losses as the aperture diameter is reduced. The optical losses depend on the aperture size, thickness and location. The optical loss strongly depend on the aperture size and thickness when the aperture size is similar or smaller than the emitted wavelength. The optical loss is negligible and not depend on the aperture thickness when the aperture size is larger than 5 times emitted wavelength.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.24-30
• /
• 2006

Integrated cavity output spectroscopy(ICOS) is a simple, non-intrusive absorption measurement technique that can detect and quantify trace-level gas species. The spectral absorbance of a gas is quantified from the integrated optical output of the modulated high-finesse cavity containing the sample which is irradiated by a wavelength-swept laser source. We constructed an experimental setup by using a tunable single mode external cavity diode laser operating at the wavelength near 765 nm and a Fabry-Perot cavity with length modulation achieved by a piezoelectric transducer where one of the cavity mirrors sat on. In the experiment performed on minute oxygen gas at the wave-length near 764.5nm, we demonstrated the minimum detectable absorption of $8.45\times10^{-8}cm^{-1}$.

• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.216-220
• /
• 2007

A widely tunable add/drop filter composed of double ring resonators is implemented with high-index-contrast polymer waveguide. To enhance the productivity, directional couplers are designed to have good fabrication tolerance. The refractive indices of the core and cladding in the 1550 nm wavelength are 1.51 and 1.378, respectively. Drop response in comparison with neighborhood peak gets enhanced by more than 2.9 dB at the wavelength where both rings resonate. This filter can be used to build widely tunable laser diode through hybrid-integration with reflective SOA.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.388-389
• /
• 2009