• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.68-74
• /
• 2008

The substrate integrated waveguide (SIW) structure can be approximated as the rectangular waveguide using common dielectric substrate with via-holes. To realize reflection-type resonator, $50-{\omega}$ microstrip line can be used for coupling with the center plane of the cavity. The oscillator is designed to operate at 9.45 GHz using the reflection-type SIW cavity resonator. The phase noise of oscillator shows -98.1dBc/Hz at 100 KHz offset. In experiment, the reflection type SIW cavity resonator improves the loaded quality factor making the low phase noise oscillator possible. Due to the entirely planar structure of this resonator, this technique can also be adequate in oscillator applications for a low cost and low phase noise performance.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.138-139
• /
• 2012

본 논문에서는 고주파 공진형 인버터 접속의 가열 코일로부터 비접촉 상태로 전자유도 와전류를 구조물에 가하여 발열하는 공진형 인버터를 이용한 유도가열 방식의 최적설계를 제안하였다. 설계한 시스템 인버터는 스위칭주파수 20[kHz] 대역에서 동작하는 하프-브리지 고주파 직렬 부하 공진형이며 LC공진 설계 시 부하 자체를 L로 설정하여 효율을 최대화 하였다. 또한 유도가열용 인버터에 적용 가능한 스너버회로의 특성분석을 통해 본 시스템의 최적화에 관한 연구를 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.648-656
• /
• 2007

This paper is about band pass filter, using Ceramics in the condition of center frequency 370Hz at milli-wave. The band pass filter is applied to Broadband Convergence Network, representing WLL(Wireless Local Loop) and LMDS(Local Multi-point Distribution Service). Sticking ceramic between strip line on a dielectric material substrate with which conductor's covers upper and basal surface, One will house the exterior by using structural resonance. In this Non Radiative Microstrip Line Filter structure, based upon simulations, generalized the two formulas finding resonant frequency of 1step ceramic resonator and bandwidth of 4step ceramic resonator. Also, As a result of experiment, using Network Analyzer, about created a experiment of structure based on the simulation result of 4-step ceramic resonator, It showed good characteristic of targeted bandwidth, comparing simulated result of 36.58GHz$\sim$37.650GHz with experimented result of 36.6GHz$\sim$37.65GHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.327-332
• /
• 2018

In this paper, the value of inverter and the characteristics of the dual-mode resonator with the shunt-stub are analyzed and calculated. The value of inverter is function of the impedances and electrical lengths of the resonator and shunt-stub. According to suggested equation, the value of inverter is increased for the square root function. And the value of inverter is decreased as higher impedance of resonator and higher ripple. The bandwidth of the filter is increased as the ripple and the impedance ratio. Also, the center frequency of the filter is shifted as designed impedance. In order to show the designed method, the filter with the resonator's and stub's impedances of $70.7{\Omega}$, and $56.56{\Omega}$, respectively, is suggested by example.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.1
• /
• pp.82-89
• /
• 2016

The unique phenomenon that jet flow kinetic energy is converted to thermal energy through thermoacoustic resonance can be applied for the multiple ignition of liquid rocket engines. The present article includes the basic principle and theory behind the phenomenon as well as major outstanding, previous research works. The thermoacoustic phenomenon is affected by underexpanded jet flow characteristics from a nozzle, geometries of a nozzle and a resonance tube, and chemical composition of jet flow. The paper concludes with discussion what should be considered as crucial issues for the future research on the development of a multiple ignition system of liquid rocket engines.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.286-290
• /
• 1994

Lasing characteristics of an Er-doped fiber laser have been investigated at various conditions of resonator reflectivities and pump powers. Variation of the laser wavelength with various mirror reflectivities has been compared with the theoretical analysis based on absorption, gain spectra, and resonator parameters. The maximum slope efficiency of 38% was obtained with the resonator's mirror reflectivities of 100% and 4% on both sides, and the threshold powers were varied from 7.8 mW to 5.6 mW, and lasing wavelengths were varied $1.532\mum to 1.563\mum and 1.558 \mum to 1.570 \mum$ for 6 and 15.8 mlong Er-doped fiber, respectively, as the resonator reflectivities were changed from 0.0016 to 0.9.to 0.9.

• Korean Journal of Optics and Photonics
• /
• v.29 no.3
• /
• pp.104-109
• /
• 2018

We explain the basic principle of transformation optics, and introduce several design techniques for transformation cavities that can maintain the characteristics of whispering gallery modes (WGMs) even if the cavity is strongly deformed from a circular shape. As a method of obtaining various transformation cavities under a specific conformal mapping, we suggest a method of parallel movement of the initial cavity domain, and a method of rotating the ellipse as a cavity domain. The internal wave pattern and the far-field output characteristics of several designed resonant modes are numerically calculated. From these results, it is confirmed that a variety of GRIN resonators are possible for a given conformal coordinate transformation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1399-1406
• /
• 2000

The exact electromagnetic field in cylindrical cavity with concentric dielectric rod is analyzed. Resonant frequency of dielectric loaded cavity is calculated by analyzing the characteristic equation. The characteristic equation is solved by using the ContourPlot graph of Mathematica. As the result of comparing calculation value and experimental value of resonant frequencies, we know that the field representation of traveling mode is exact.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.143-144
• /
• 2017

최근 높은 효율을 달성할 수 있는 LLC 공진 컨버터가 다양한 산업분야에 적용되고 있다. 응용분야에 따라 플라즈마 공정과 같이 특수전원장치를 필요로 하는 분야에서는 LLC 공진 컨버터의 무부하 동작을 요구하기도 한다. LLC 공진 컨버터는 부하 조건과 달리 무부하 조건에서 비선형적인 동작 특성을 보이는 것을 확인할 수 있었고, 그에 따른 제어가 필요하다는 것을 알 수 있었다. 이에 본 논문에서는 무부하 조건의 LLC 공진 컨버터 제어에 관한 연구를 진행하였다. 분석을 통해 동작 특성을 확인하고 컨버터를 무부하 조건에서 제어하기 위한 방법에 대하여 설명한다. 분석내용 및 제어방법은 시뮬레이션 및 실험을 통하여 확인할 수 있었다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.42-47
• /
• 1999

Based on characteristics of resonator in BPF, a resonant characteristic is obtained by using variation of characteristic impedance in rectangular waveguide. And we have designed and made a novel waveguide BPF with this phenomenon. This filter can be made with arbitrary lengths of rectangular waveguide resonators.