• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.7-8
• /
• 2014

본 논문은 다이폴 코일 공진방식(DCRS, Dipole Coil Resonant System)을 사용한 원격 무선전력전송 개발 사례를 소개한다. 제안된 다이폴 코일 공진방식은 기존의 자기결합 공진방식(CMRS, Coupled Magnetic Resonance System)에 비하여 송신, 수신코일로만 이루어진 간단한 코일 구조와 작은 부피를 가지며, 공진도 Q를 100이하로 설계하여 주변 환경 변화에 강인한 전력전달 특성을 가진다. 본 논문에서는 원전 중대사고 시 격납건물 필수계측기용 소형 비상전원으로 개발된 10W급 7m 원격 무선전력전송 장치의 구성 및 설계과정을 제시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.495-498
• /
• 2014

현재 무선충전은 자기유도와 자기공진 두 가지 방식이 주류를 이루고 있다. 자기유도 방식은 전력 송신부 코일에서 자기장을 발생시키면 그 자기장의 영향으로 수신부 코일에서 전기가 유도되는 전자기유도 원리를 이용한다. 자기공진 방식은 송신부 코일에서 공진 주파수로 진동하는 자기장을 생성, 동일한 공진 주파수로 설계된 수신부 코일에만 에너지가 집중적으로 전달되도록 한 기술이다. 최근에 스마트폰의 무선충전에 대해 관심이 높아지고 있으며, 많은 기업들이 무선충전을 개발하고 있다. 사용자에게 있어 편리함을 주는 무선충전이지만 보안위협이 존재하고, 이것에 대한 표준화와 보안대책요구사항은 체계적이지 않다. 이에 본 논문은 모바일기기에서 자기공진방식의 무선충전의 보안 위협과 보안요구사항을 정의해 분석하고 보안요구사항을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.164-165
• /
• 2017

본 논문은 직렬 공진형 컨버터를 이용하여 낮은 저항을 갖는 주방 용기를 가열하기 위한 유도 가열(Induction Heating; IH)용 공진형 컨버터와 코일 설계방법을 제안한다. 기존 IH 시스템은 저항이 작은 용기를 가열할 때 낮은 전압이득으로 인해 정격보다 큰 전류가 흘러 스위칭 손실 및 전도 손실이 증가하고 소자의 정격 전류량을 초과하는 문제가 발생한다. 본 논문에서는 용기에 따른 임피던스를 분석하고 다양한 저항 조건의 용기를 모두 가열하기 위한 적절한 IH용 코일 설계 방법을 제안한다. 이는 2.4 kW의 최대 전력을 가지는 IH용 공진형 컨버터 시작품을 사용하여 제안하는 설계의 타당성을 검증하고자한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.1-5
• /
• 2011

A magnetic resonant coil system for enhancement of wireless power transfer efficiency of NFC devices was proposed. The NFC system consists of resonant coils arrange between source coil and device coil. The effects of resonant coil was measured using a 13.56MHz RFID reader and tag system and simulated by 3D RF simulator. The measurement results from RFID reader and tag show that the maximum distance of signal transmission is increased by 96.72% and received voltage of RFID tag is grew by 17.95% thanks to the magnetic resonant coils.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.41-45
• /
• 2015

In this paper, the single port dual-band resonator for magnetic resonance wireless power transfer is proposed. The proposed dual-band resonator is consists of 20 turns spiral coil, a single loop, matching circuit, lumped elements, and a single port. The two sides of the matching circuit are connected to via holes. The spiral coil is operated at MF-band and single loop is operated at HF-band, respectively. We use two of the same structure resonators and simulated and the power transfer efficiency was calculated. The efficiency of simulation and measurement is above 60% at the MF and HF bands, and the distance is 100 mm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.163-169
• /
• 2016

In this paper, we miniaturized the loop and coil in magnetic resonance wireless power transfer(MR-WPT) system for application to the small mobile device. The proposed disk type double coil resonator was designed to cause resonance at 6.87 MHz. It is composed of thin copper on both-side of acrylic substrate structured 2 mm width, 1 mm pitch and 8 turns. The outer radius of spiral coil pattern is 9 cm. And the proposed loop was made of the copper wire 5 mm diameter of cross-section. The size of loop is 10 cm diameter. For resonance at 6.87 MHz, the capacitor with 3,300 pF was connected in series on the loop. We rearranged the resonators and organized several WPT systems which is rearranged by resonators. The highest transfer efficiency of miniaturized WPT system was 35.67 %. This proposed design of spiral double coil will contribute to make resonator smaller for appling small and thin mobile device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.935-940
• /
• 2016

Recently, wireless power transmission system is gradually extended to technology in various fields such as lighting field, electric vehicles and smartphones wireless charging system. The largest of the two elements for high transmission efficiency of the wireless power transmission system are resonant coils and power amplifiers. In this paper, in order to build a high efficient wireless power transmission system, we introduce the resonance coil manufacturing method and high efficiency power amplifier design method that operates at 6.78MHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.905-912
• /
• 2011

Interaocular pressure (IOP) sensor and external coil to detect the resonance frequency of the IOP sensor are designed and implemented using MEMS technology. The IOP sensor is designed using 3-D electromagnetic (EM) simulation. The resonance frequency of IOP sensor needs to be lower than that of the external coil. Additionally, the resonance frequency of the IOP sensor needs to be located near the resonance frequency of the coil to get the sufficient amplitude of phase variation. The frequency where the phase peak appears must be constant according to the distance between the IOP sensor and the external coil. From the measurement results, we demonstrated that the designed IOP sensor has the same resonance frequency with various distances between the IOP sensor and the coil.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.487-488
• /
• 2017

본 논문에서는 급전 코일과 집전 코일 간 공극 변화에도 일정한 공진 특성을 가지는 무선 전력 전송 시스템을 제안한다. 공진회로가 적용된 시스템의 회로특성은 인덕턴스나 커패시턴스와 같은 파라미터 값에 크게 의존하는데, 일정한 공진 특성을 가지기 위해서는 공극의 변화에도 일정한 인덕턴스가 유지되어야 한다. 제안하는 무선 전력 시스템은 공극이 감소할 때 페라이트 코어에 의해 인덕턴스가 증가하고 알루미늄 판에 의해 인덕턴스가 감소하는 상보적인 특성을 결합하여 공극변화에도 인덕턴스가 일정하게 유지되게 한다. 페라이트 코어와 알루미늄 판에 위치한 각 코일들의 기자력 비율을 조절할 경우 공극이 7 cm 에서 15 cm 까지 변하더라도 급 집전부의 자기 인덕턴스 변화는 ${\pm}1%$ 이내로 일정하게 유지되는 것을 확인하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.119-126
• /
• 2016

In this paper, we proposed the planar textile resonator for constructing wearable MR-WPT system and analyzed the characteristic of textile substrates used in resonators. The planar textile resonators were designed to resonate at 1-10 MHz. The loop and coil were fabricated planar structure on textile substrate using conductive materials. Polyester fiber and cotton widely used in real life were chosen as textile resonators for wearable applications and copper tape and silver paste were used for fabricating planar loop and coil on textile substrate. For comparison analysis on transfer efficiency according to the types of textile, transmitter and receiver parts were symmetric. According to the result, for the highest transfer efficiency of wearable WPT system, the planar resonators have specifications of relative thick textile substrate with low permittivity and low surface resistance of conductive pattern. The performed experiments show that the planar textile resonator is possible to be used for resonator in wearable MR-WPT system.