• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.891-898
• /
• 2008

In this paper, we have studied on the possibilities of the biomaterial detection using single-walled carbon nanotube (SWNT) based on interdigital capacitors. For the four different configurations, such as interdigital capacitor, SWNT in the $5\;{\mu}m$ gap interdigital capacitor, biotinlated SWNT, and biotin and sreptavidin immobilization cases, the resonant frequency has been measured as 10.02 GHz, 11.02 GHz, 10.82 GHz, and 10.22 GHz, respectively. Assuming that the resonant frequency reflects the capacitance changes due to binding of two-different permittivity biomaterials, we have suggested an equivalent circuit model based on measured results, confirming the capacitance changes. For biotinlated SWNT and biotin-streptavidin immobilization cases, the capacitances are $C_b=0.55\;pF$ and $C_s=0.95\;pF$. In this work, we experimentally demonstrated that the specific biomaterial binding causes the capacitance change and therefore this gives rise to resonant frequency. In conclusion, we confirmed the sufficient possibility as CNT biosensor because an analyte biomaterial(streptavidin) binding arouses a considerable resonant frequency change.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.65-74
• /
• 2013

PURPOSES: This study is to evaluate the dynamic modulus changes of permeable asphalt mixtures by using non-destructive impact testing method and to compare the dynamic moduli of permeable asphalt mixtures through repeated freezing and thawing conditions. METHODS: For the study, non-destructive impact testing method is used in order to obtain dynamic modulus of asphalt specimen and to confirm the change of dynamic modulus before and after freezing and thawing conditions. RESULTS : This study has shown that the dynamic moduli of asphalt concrete specimens consisting of 10%, 15% and 20% porosity are reduced by 11.851%, 1.9564%, 24.593% after freezing and thawing cycles. CONCLUSIONS : Non-destructive impact testing method is very useful and has repeatability. Specimen with 15% porosity has high durability than others.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.3-6
• /
• 2002

In this paper, Thin film bulk acoustic resonate.(TFBAR) fillers tuned by gold plated on-wafer inductors are presented. The air-gap type TEBAR is used with aluminum nitride(AIN) as piezoelectric material and platinum as top and bottom electrodes. Inductor equivalent model and modified Butterworth-Van Dyke(MBVD) model are employed for the frequency tuning of fabricated TFBAR bandpass filters. Fabricated inductor has inductance of 3 nH and Q factor of about 8 at 2 ㎓. It is clearly revealed that inductor tuning can enhance the bandwidth of ladder filters and improve out-of-band rejection characteristic around 10㏈.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.173-177
• /
• 2003

In this paper, a new modeling methodology of thin film bulk acoustic resonate. (TFBAR) is presented. The new model is started from the Mason model that is a good model to explain the physical characteristics of TFBAR. After simplifying the modified Mason model added dielectric loss term to conventional Mason model, the improved Modified Butterworth-Van Dyke (MBVD) model similar to conventional MBVD model is complete. The proposed model has three optimization variables those are half of the MBVD model. As a result, the curve fittings for the measured data are faster and smarter than any other model.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.748-749
• /
• 2008

대용량 전동기에는 역률보상용 콘덴서와 리액터를 설치하여 부하역률을 개선하고 있다. 역률보상용 콘덴서의 기동리액터 전.후단 설치지점에 따른 특성변화를 해석한 결과 콘덴서를 기동 리액터 전단에 설치한 경우 기동시의 순간적인 콘덴서 돌입전류로 상용주파수 부근의 고조파(1,3,5차) 공진이 발생하여 이로 인한 과전압이 콘덴서와 직렬리액터에 반복적으로 인가되어 수명이 단축됨을 확인할 수 있었다. 기동초기에 발생하는 과전압을 저감하기 위해서 콘덴서 회로의 연결점을 기동리액터 후단에 설치한 결과 인가전압과 전류가 감소됨을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.885-887
• /
• 1999

The piezoelectric ceramic resonator using length extensional vibration rather than contour extensional vibration in terms of the size is suitable for personal portable communication. In this paper, $Pb(Zr_{x}Ti_{l-x})O_{3}$ + r[wt%]$Cr_{2}O_{3}$ ceramics, x=0.56, 0.53, 0.50 (ie, Zr/Ti ratios = 56 /44, 53/47, 50/50) r=0, 0.3[wt %], were fabricated. Temperature stability of length extensional vibration mode of those specimens was investigated. Both crystal structure with rhombohedral phase in the case of no addition of $Cr_{2}O_{3}$ and crystal structure with morphotrophic phase boundary in case of additions of 0.3[wt %]$Cr_{2}O_{3}$ had the vest temperature stability and improved temperature stability through thermal aging.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.37-40
• /
• 1998

In this paper, Pb(Z $r_{0.53}$ $Ti_{0.47}$) $O_3$+x[wt%]C $r_2$ $O_3$ ceramics were fabricated, and thermal aging effects on the specimen were investigated. After thermal aging, the temperature coefficients of their resonant frequence became stable and only the specimen with C $r_2$ $O_3$ additives in them could have lower temperature coefficientient

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.90-97
• /
• 2010

In this paper, we propose antenna topology and ground plane shape to improve the performance of PIFA (Planar Inverted F Antenna) which is built-in mobile phone. First, we designed the PIFA antenna consists of multiple radiators to provide multi-current paths. Then we designed U-shaped ground plane on the PCB under the antenna. The proposed antenna structure shows TRP/TIS improvement of 2.0 dB/3.7 dB for GSM and 2.2 dB/ 2.0 dB for DCS and 0.8 dB/1.5 dB for PCS and 1.3 dB/0.7 dB for WCDMA at the free space.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.113-121
• /
• 2005

In this paper, a constant output power supply system for ozonizer is proposed to remove the noise of ozonizer and control the output of ozonizer using feedback control. The proposed system is based on the rouble control loop such as the outer voltage control loop and inner current control loop. In the proposed system overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The inner current control loop is adopted by an internal model controller. The internal model controller is designed to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. The outer voltage control loop employing P-Resonance controller is proposed. The resonance controller has an infinite gain at resonant frequency, and the resonant frequency is set to the fundamental frequency of the reference voltage in this paper. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been verified by the experimental results.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.73-81
• /
• 2002

This study is performed to evaluate and design the vibration characteristics of the onboard machinery with resilient mountings. To reduce the vibration revel of onboard machinery with resilient mountings, it is important to evaluate and, if necessary modify vibration characteristics of the resilient mountings. In this study we have developed a program to calculate natural frequencies of the machinery with resilient mountings, forced vibration levels due to internal excitation force of the machinery itself and external excitation forces of the main engine and the propeller, and the force and motion transmissibility of the resilient mountings. The developed program can be also applied to optimal design of the resilient mountings for obtaining a target natural frequency and for achieving a minimum forced vibration level at the center of gravity of the machinery.