• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.3
• /
• pp.39-43
• /
• 2011

Effects of cavity material on the Q-factor measurement of microwave dielectric materials were studied by HFSS simulation and the measurements using metal cavity. $TE_{01\delta}$ mode resonant frequency was determined from the electric and magnetic field patterns and the loaded Q-factor was calculated from 3dB bandwidth of $S_{21}$ spectrum. When the cavity metal materials were Cu, SUS and Au cavity, the level of Q-factor was similar. However, Q-factor was significantly decreased when the cavity metal material was CuO. The Q-factor measurements of dielectric resonator by network analyzer using various metal cavity exhibits consistent behavior.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.895-899
• /
• 2000

A method of measuring Q of a two port cavity by scattering parameters is proposed. The scattering parameters of a two port cavity resonator are derived by a lumped equivalent circuit model as a function of cavity parameters, including the cavity Q. These can be also obtained by direct measurement with a modern network analyzer, The results show good agreement with those from other well-known methods. This two port measurement can provide additional information such as the coupled power ratio, which is one of the important parameters for the beam accelerating cavities.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1175-1180
• /
• 2014

In this paper, the open ring type DGS(Defected Ground Structure) resonator, applicable to MMIC(Monolithic Microwave Integrated Circuit), is proposed to improve phase noise characteristics of RF oscillator. This resonator is planar type, therefore, it easy to design miniaturrized., and takes relatively high Q value. Modeling the equivalent parameter of resonator is needed, when designing the RF oscillator with resonator. The mathematical method to solve the equivalent parameter of the resonator from the measured results of resonator is introduced in this paper. To verify the method, DGS resonator with 5.8 GHz center frequency is fabricated, for measuring characteristics and calculating the equivalent parameter. The result from this process is compared with the data of the ADS simulation, and as a result both were identical.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.131-134
• /
• 1992

해양에서 자연적으로 형성된 기포 또는 기포집단의 그 자체의 공진특성에 의해, 해중에서 사용하는 음파의 전달과정에 여러 가지 영향을 미칠 수 있음이 제기되어 왔다. 본 실험은 기포집단이 수중에서 음파의 전달과정에 어떤 영향을 주는가를 알아보기 위한 것으로, 수중에 수직형태의 판형기포 집단을 발생시켜 1 kHz ~ 100 kHz의 주파수를 가지는 음파를 각각 투과시킴으로써 주파수별 음파전달손실을 측정하였다. 측정결과, 개개 기포의 공진주파수 영역에서 투과손실이 최대가 됨을 알 수 있었고, 그 이하의 주파수영역에서는 기포판의 두께공진모드에 의한 변화가 관측되었으며, 공진주파수 이상의 고주파수영역에서는 주파수 증가에 따라 투과손실이 감소하는 현상을 알 수 있었다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.194-197
• /
• 2001

본 논문에서는 결합창으로 결합을 구현한 유전체 공진기 필터의 결합창 특성을 해석하였다. 결합창의 특성을 결합계수로 표현하였으며, 간단한 표현식으로 유도하였다. 결합창의 크기를 변화시키면서 해석 방법을 적용하여 결합계수를 계산하였고, 측정결과와 비교하여 해석의 유효성을 증명하였다. 본 논문에서 제안한 방법은 적용이 간단할 뿐 아니라, 결합창의 제작 및 측정오차 범위에서 정확한 결과를 보였다. 본 논문에서 제안한 방법은 유전체 공진기 필터의 설계 및 유전체 공진기와 Varactor diode로 이루어지는 동조필터가 동조주파수 대역에서 일정한 통과대역폭을 가지기 위한 최적화된 결합창의 설계적용이 가능하다.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.216-219
• /
• 2005

In this study, we will explain the design, test results and analysis of system for measuring the small mass in the microgravity environment. It is so difficult to measure the mass by sensing the gravity as the ground in the microgravity environment. The suggested method is to measure the resonance frequency of a sample. The resonance frequency may be measured as a function of mass. If we know the resonance frequency of the mass, we can guess the mass by detecting the resonance frequency. Piezoelectric ceramics have the characteristics that resonance frequency is changed by total mass which are its mass and the attached mass. This system have some problems but we verified that we can measure the unknown mass using the resonance frequency as the mass.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.264-272
• /
• 1997

This paper presents the analysis of forced resonance characteristics of electrically small dipole antenna loaded with external element and its application to measuring unknown frequencies. The method of moments with Galerkin's procedure is used to determine the current distribution of the antenna. To derive the determinantal equation of resonance lengths at a given frequency, small antennas with the reactance loaded can be treated as a two-port network. Numerical results show that the forced resonance of the electrically small dipole antenna loaded with reactance can be easily obtained by controlling the reactance for the series resonance as well as for the parallel resonance. It is demonstrated that the forced resonance characteristics can also be applied to the measurement of unknown frequencies.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.41-47
• /
• 2001

폴리머 박막은 반도체 패키징, MEMS 구조물은 물론 MCM-D 등의 기술에도 널리 쓰이고 있다. 또한 대부분 폴리머/금속의 다층구조의 형태를 띠고 있어 이 상태의 기계적 특성의 이해는 더욱 중요하다. 본 연구에서는 폴리머 박막의 기계적 특성을 측정하기 위한 새로운 방법이 제안된다. 제안된 방법은 최근 발달된 마이크로머시닝기술을 사용하여 구현된 공진형 스트링구조를 이용하게된다. 폴리머 기계적 특성치와 스트링의 공진특성은 서로 상관 관계를 갖게되며 이러한 공진특성의 측정은 기계적 특성의 실시간 관찰을 가능하게 해준다. 본 논문에서는 공진형 스트링을 이용하여 폴리이미드의 잔류음력과 폴리이미드/금속간의 접착 내구성을 정량화하는 방법을 제안한다. 제안된 측정방법은 단순히 스트링구조 뿐만 아니라 다른 기계적 구조에도 응용이 가능하다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.218-226
• /
• 1999

This paper describes resonant mode selection with which the relative permittivity can be measured exactly. To measure the relative permittivity, a circular cylindrical cavity filled with dielectric material is used. When the circular cylindrical cavity is filled with the dielectric material, the air gap occurs on account of machining error. Accurate relative permittivity can be obtained by using less sensitive mode in resonant frequency variation by the air gap. As a result, Average 0.009% resonant frequency variation in the vertical and the radial direction appears at $TE_{011}$ mode. It is interesting that the frequency variation by the air gap at $TE_{011}$ mode turns out to be the least sensitive.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.1
• /
• pp.11-22
• /
• 2023

In this work, a depth-by-depth evaluation on the deterioration of concrete is suggested by utilizing disk shaped concrete specimens. Dynamic elastic modulus of cylindrical concrete was measured using a free-free resonance column method and compared with dynamic elastic modulus of disk-shaped concrete measured by impulse excitation technique(IET) and impact resonance(IR). According to the results of the experiment, both IET and IR methods showed a smaller difference in dynamic elastic modulus with smaller deviation in data when thickness of the disk specimen was increased. This trend was more evident from dynamic elastic modulus measured by IR method compared to that measured by IET. Variation in data was also smaller with the IR result. To increase the accuracy of the data, it is recommended to use the IR method for disk specimen with a diameter of 100mm and a thickness of 25mm.