• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.1-4
• /
• 2011

A new fabrication technique of long-period fiber gratings with periodically surface-etched structures is proposed. Transmission characteristics of the periodically surface-etched long-period fiber gratings are improved by changing strain because of variation of coupling strength between the core and the cladding modes. The sensitivities of the periodically surface-etched long-period fiber gratings to strain, torsion, and ambient refractive index were measured. The strain and the torsion sensitivities were measured to be $-0.033\;dB/\mu\varepsilon$ and -1.30 nm m/rad, respectively. The ambient index sensitivity was measured to be -31.33 nm/RIU from a range from 1.33 to 1.42.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.613-623
• /
• 2012

In this paper, we present an ultra miniaturized voltage tuned oscillator, with HMIC-type amplifier and phase shifter, using LTCC artificial dielectric resonator. ADR which consists of periodic conductor patterns and stacked layers has a smaller size than a dielectric resonator. The design specification of ADR is obtained from the design goal of oscillator. The structure of the ADR with a stacked circular disk type is chosen. The resonance characteristic, physical dimension and stack number are analyzed. For miniaturization of ADRO, the ADR is internally implemented at the upper part of the LTCC substrate and the other circuits, which are amplifier and phase shifter are integrated at the bottom side respectively. The fabricated ADRO has ultra small size of $13{\times}13{\times}3mm^3$ and is a SMT type. The designed ADRO satisfies the open-loop oscillation condition at the design frequency. As a results, the oscillation frequency range is 2.025~2.108 GHz at a tuning voltage of 0~5 V. The phase noise is $-109{\pm}4$ dBc/Hz at 100 kHz offset frequency and the power is $6.8{\pm}0.2$ dBm. The power frequency tuning normalized figure of merit is -30.88 dB.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.1
• /
• pp.11-18
• /
• 2012

In this paper, the occurrence of a stopband phenomenon when an acoustic wave propagates through periodically corrugated ducts is discussed using theoretical and BEM analyses. A 2-D duct with sinusoidally corrugated upper and lower walls is considered. When the magnitude of the sinusoidal corrugation is sufficiently small compared to the duct's height, the wave equation is solved with the multiple scaling perturbation method. Then stopbands for Bragg and non-Bragg resonances are computed from the condition where frequency becomes a complex number. A 2-D BEM analysis is performed to compute insertion loss of the duct, and stopbands are confirmed as predicted by analytical analysis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.69-70
• /
• 2011

최근 해저지진의 활동에 따른 극한 쯔나미 파랑이 해안도시와 항만에 어마어마한 손상을 가져오고 있다. 전세계에 걸쳐 특정해역에서는 강한 정진형태의 부진동과 처오름이 관측되고 있다. 한반도에서는 그렇게 빈번한 발생을 나타내고 있지는 않으나, 과거기록을 보면 동해에서 몇 개의 중요한 발생사례도 존재한다. 본 연구에서는 특히 만이나 내수해역에서 최근 해저지진의 발생 추이를 분석하고 이에 따른 쯔나미 발생 메카니즘을 해석하여 새롭게 내수역에서의 수치모델에의 적용을 통해 공진을 통한 쯔나미 파랑의 변환을 다루어 통항선박에 대한 안정성 확보에 기초자료를 제공하고자 하였다. 내수역에서의 쯔나미 파랑에 대한 반응을 정합성 및 웨이블릿 해석으로 탁월 주기와 지속시간에 대한 분석으로 파악하였으며, 쯔나미파의 입사와 독립적인 공진모드의 도출은 쯔나미 재해의 경감을 위한 시설물 및 재난지역을 식별하는데 도움을 주고, 나아가서는 장래 재난에 대한 적절한 대비에 기여할 수 있을 것으로 본다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2003

When solving the problems of electric power quality the converters with high Power factor are useful for the DC arc furnace power supply. In this paper, resonant converters of 50(60) Hz AC to DC arc described, where in each period of network voltage the capacitor and inductor of an oscillatory circuit are switched from series into parallel and vice versa parametrically. The duration of series and parallel connection and also the transformation ratio are dependent on load. Parallel oscillatory circuit restricts the short circuit current. These converters have high power factor from no-load to short-circuit and fit very well to supply are furnaces.

• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.1-5
• /
• 2010

In this study, we propose a grating structure using guided-mode resonance (GMR) to increase the absorption efficiency of a silicon solar cell. The proposed solar cell design consists of a one-dimensional diffraction grating and a planar waveguide layer of poly-silicon deposited on a silver reflector. We investigate the influence of structure parameters such as grating period, waveguide thickness, grating width and grating depth. Optimal parameters are found using the particle swarm optimization (PSO) algorithm. In the optimized GMR-assisted solar cell, absorption efficiency up to 65.8% is achieved in the wavelength range of 300 nm~750 nm.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.877-880
• /
• 2017

Impeller blades in the centrifugal compressor are subjected to static loads due to the high-speed rotation and steady aerodynamic forces. At the same time, aerodynamic excitations by the interaction between the impeller and the diffuser vanes(DV) periodically excite the impeller blades in resonant conditions, which may lead to high cycle fatigue (HCF) and eventually result in failure of the blades. In order to predict the structural response accurately, the aerodynamic excitation and the major resonant conditions were predicted by performing the unsteady flow analysis and modal analysis using ANSYS. Next, a unidirectional forced vibration analysis was performed by using fluid-structure interaction (FSI) method, and the safety of HCF was evaluated based on the results.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.97-104
• /
• 2011

In the dielectric resonator method, which has been widely used for measuring the microwave surface resistance of superconductors, accuracies in the geometrical factors (G-factors) affect the uncertainty in the measured surface resistance. We compare the G-factors of short-ended sapphire resonator as obtained by using field analysis with those by using computer simulations: The former is obtained by using the analytic expressions for the electric and the magnetic field components inside the resonator, and the latter by using computer software. The G-factors as obtained by using the latter appear to be closer to those obtained by using the former as the resonator space is divided into larger number of sub-space, i.e., a tighter mesh, with a difference of ~8 % observed for a mesh of 14400 sub-spaces reduced to ~2 % for 114996 sub-spaces. Variations in the relative uncertainty in the surface resistance of typical $YBa_2Cu_3O_{7-\delta}$ superconductor films with those in the G-factors are studied, which provides an upper limit of the relative uncertainty in the G-factors required for realizing the target uncertainty in the surface resistance. These results could be useful in estimating the optimum number of meshes for obtaining the G-factors through computer simulations.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.481-495
• /
• 2020

After the resonator on the basis of the wave-filter theory was designed to control the waves with a specific frequency range surging into the harbor, the several case with the use of resonator have been reported in some part of sea, including the port of Long Beach, USA, and yacht harbor at Rome, Italy in order to control the long-period wave motion from the vessels. Recently, the utility and applicability of the resonator has been sufficiently verified in respect of the control of tsunami approximated as the solitary wave and/or the super long-period waves. However, the case with the application of tsunami in the real sea have not been reported yet. In this research, the respective case with the use of existing resonator at the port of Mukho and Imwon located in the eastern coast of South Korea were studied by using the numerical analysis through the COMCOT model adapting the reduction rate of 1983 Central East Sea tsunami and 1993 Hokkaido Southwest off tsunami. Consequently, the effectiveness of resonator against tsunami in the real sea was confirmed through the reduction rate of maximum 40~50% at the port of Mukho, and maximum 21% at the port of Imwom, respectively. In addition, it was concluded that it is necessary to study about the various case with application of different shape, arrangement, and size of resonator in order to design the optimal resonator considering the site condition.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1017_1018
• /
• 2009

LLC 하프브리지 공진형 컨버터는 일반적으로 게이트 구동드라이버, 구형파 발생부, 공진회로 및 정류회로로 구성되어 있다. 구형 파발생기는 두 개의 스위치 소자가 각각 50%의 주기와 약간의 데드타임을 가지고 반복하여 동작함으로써 구형파 전압을 발생하며, 공진회로에 구형파 전압이 인가되어도 높은 차수의 고주파 전류를 필터링하여 기본적으로 정현파 전류만 흐르도록 한다. 본 연구에서는 LLC 컨버터를 이용하여 LED를 구동을 하였고 시뮬레이션 결과를 실제 실험을 통해서 비교하였다.