• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.25-30
• /
• 2010

In this paper, a novel notch resonator is proposed based on Rectanglar Split Ring Resonator (R-RSS) element. We represented the electrical characteristics for R-SRR elements coupled with microstrip line, and measured result is compared with electromagnetic simulation (HFSS) result. We also solved equivalent circuit for R-SRR element, and also discussed influences of change structural parameters of R-SRR. the size of R-SRR is the most important parameters for frequency tuning. Also we can make tunable resonator form the basic structure. This novel resonator can apply to design of tunable bandpass filter and voltage control oscillator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1432-1437
• /
• 2010

This paper proposes a new design method of bandpass filter with single dual-mode resonator. In the proposed method, a coupling coefficient between two resonators was obtained by considering a dual-mode resonator as two single resonators. Based on the obtained coupling coefficient, two resonant frequencies of dual-mode resonator were calculated and then arranged according to a transmission zero's location of required filter. To verify the proposed theory, two WLAN bandpass filters which have a transmission zero to a lower and an upper stopband repectively were designed and implemented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1581-1586
• /
• 2012

In this paper, a novel resonator using ring type DGS is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator, and oscillator for 5.8GHz band is designed using proposed DGS resonator. The ring type DGS resonator is composed of DGS cell etched on ground plane under $50{\Omega}$ microstrip line. At the fundamental frequency of 5.8GHz, 7.6dBm output power and -82.7 dBc@100kHz phase noise have been measured for oscillator with ring type DGS resonator. The phase noise characteristics of oscillator is improved about 9.5dB compared to one using the general ${\lambda}/4$ microstrip resonator. Because it is possible that varactor diode or lumped capacitor is placed on the gaps of ring type DGS, resonant frequency can be controlled by bias voltage. We can design voltage controlled oscillator using proposed ring type DGS resonator. Thus, due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1538-1543
• /
• 2013

In this paper, a novel split ring resonator is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator. Oscillator using proposed split ring resonator is designed, it has improved phase noise characteristics. At the fundamental frequency of 5.8GHz, 7.22dBm output power and -83.5 dBc@100kHz phase noise have been measured for oscillator with split ring resonator. The phase noise characteristics of oscillator is improved about 9.7dB compared to one using the general ${\lambda}/4$ microstrip resonator. Next, we designed voltage controlled oscillator using proposed split ring resonator with varactor diode. The VCO has 125MHz tuning range from 5.833GHz to 5.845GHz, and phase noise characteristic is -118~-115.5 dBc/Hz@100KHz. Due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.104-105
• /
• 2000

다이오드 레이저로 펌핑되는 Nd:YAG 매질에 형성된 열 복굴절은 레이저 출력과 빔질의 저하를 초래한다. 선편광된 레이저 출력을 얻기 위해서는 주로 공진기 내에 선형 편광자를 삽입하게 되는데, 레이저 매질에 형성된 열 복굴절에 의한 왜곡 편광된 레이저 빔이 편광자에 의해 반사되어 공진기 손실을 초래한다. 편광 왜곡에 의한 레이저 빔의 손실을 줄이거나 이중 초점을 제거하기 위해 주로 사용되어지는 광 소자는 Faraday 회전자, λ/4 판, 석영 회전자 등이 사용되어진다.$^{(1-5)}$ 90$^{\circ}$ 석영 회전자와 Faraday 회전자는 공진기 내에 두 개의 동일한 구조를 갖는 레이저를 이용할 경우 사용되고 λ/4 판 과 45$^{\circ}$ Faraday 회전자는 주로 단일 레이저 헤드의 복굴절 보상을 위해 사용되어진다. 45$^{\circ}$ Faraday 회전자는 이론적으로 완벽히 열복굴절에 의한 편광 왜곡을 보상한다. 그러나, 열복굴절을 완벽히 보상하기 위해서는 레이저 빔이 항상 레이저 매질의 같은 지점을 통과해야 한다. 실제적으로 레이저 매질에서는 열에 의한 열 렌즈 효과가 있기 때문에 레이저 빔이 항상 같은 지점을 통과하지 않게 된다. 이런 문제를 해결하기 위해 공진기 내에 열 렌즈 효과를 보상하기 위한 렌즈를 삽입하거나 레이저 헤드를 공진기 거울 가까이 설치하여야 한다. Faraday 회전자는 길이가 길기 때문에 레이저 헤드를 공진기 거울 가까이 설치하기는 어렵고 항상 열 렌즈 효과를 보상해주는 광학 소자가 있어야 하는 단점이 있다. 반면 λ/4 판은 완벽한 편광 왜곡을 보상해주지 않아 레이저 손실을 초래하지만 두께가 얇아 레이저 헤드와 공진기 거울을 근접해서 설치할 수 있어서 몇몇 연구자에 의해 연구되어 졌다.$^{(3)}$ 본 연구에서는 λ/4 판을 이용하고 편광기에서 반사된 빔을 공진기에 되반사 시키는 구조를 사용하여 선 편광된 레이저의 출력과 빔의 질을 개선 시켰다. (중략)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.796-808
• /
• 2007

In this paper, two novel compact microstrip bandstop filters using complimentary split ring resonators(CSRRs) and spiral resonators is proposed. The first one is the bandstop filter using an array of CSRRs etched on the center line of a microstrip. The bandstop is due to the presence of negative effective permittivity and positive permeability near resonant frequency which prevent the wave propagation. The second on is the bandstop filter using an array of spiral resonators etched on the center line of a microstrip. The bandstop is due to the self-resonance of spiral circuit. We have achieved controllable resonance frequency and bandwidth, super compact dimension, low insertion losses in the passband and high level of rejection in the stopband with sharp cutoff. The electrical sizes of two proposed filter are very small. Additionally, they can be easily fabricated and compatible with MMIC or PCB technology.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.119-126
• /
• 2003

In this paper, a cylindrical cavity resonator oscillator with high Q factor is designed and fabricated to improve the phase noise characteristic. A cavity resonator is coupled to oscillating circuit using aperture hole. Measured results show that the cylindrical cavity resonator oscillator (CRO) for Ku-band has less phase noise than the dielectric resonator oscillator (DRO) with the same oscillating circuit. It has output power of +3.92 dBm at the center frequency 13.4015250 GHz and phase noise of -109 dBc/Hz at 100 kHz offset.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.82-85
• /
• 2002

본 논문에서는 접지면에 어퍼쳐를 갖는 협대역 hairpin-comb 대역 통과 여파기를 제안하였다. Hairpin-comb 공진기는 두 공진기 사이의 간격이 매우 좁더라도 약한 커플링을 유지하는 특성이 있으므로 협대역 대역통과 여파기 제작시 여파기의 전체적인 크기를 작게 할 수 있는 장점이 있다. 그러나 일반적인 마이크로스트림에서는 공진기 사이가 최소한의 거리가 되더라도 커플링이 너무 미약하여 사용할 수 없다, 그러므로 접지면의 어퍼쳐를 사용하여 약한 커플링을 보상함으로써 일반 마이크로 스트립에서도 협대역을 대역통과 여파기를 제작할 수 있었다. 또한 공진기 사이의 거리변환 없이 어퍼쳐의 크기에 의해서 커플링을 조절함으로써 전체 여파기의 크기를 고정시킨 상태에서 대역폭을 조절할 수 있는 장점이 있다. 본 논문에서는 중심 주파수가 1.78 ㎓ 이고 대역폭이 62MHz(3.5%)인 여파기를 제작하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.12-18
• /
• 2002

In this paper a novel dielectric resonator (DR) bandpass filter (BPF) with flexible arrangement of attenuation poles is proposed. This DR filter is similar to a conventional DR filter except adding a microstrip line below a DR, which not only shifts the location of attenuation poles, but also improves skirt characteristics. The duplexer with the proposed DR BPF has been yielded better isolation and sharper skirt behavior than that with a conventional DR filter. The implemented duplexer has shown a good performance and been well agreed with the simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.424-429
• /
• 2016

This paper presents dual-mode ring-resonator bandpass filter using LUC of artificial-transmission-lines. The conventional ring-resonator bandpass filter has limitation in miniaturization because the conventional ring-resonator is based on a one wavelength operation, and problem due to undesire harmonics. The ring-resonator bandpass filter is miniaturized and show higher order mode rejection by configuring a ring-resonator with LUC of artificial-transmission-lines. The two-stage bandpass filter is designed and fabricated with a ring-resonator and input/output interdigital coupled line. A fabricated filter shows dual-mode, rejection of whole ultra wide band, sharp skirt characteristics and has ring area reduced by 60 % compared to the conventional ring-resonator bandpass filter.