• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.320-323
• /
• 2007

웹 서비스와 같은 분산된 환경에서, 특정 서비스를 수행하기 위해서는 원격의 컴퓨터나 사이트상에서 다중 에이전트들의 협업을 통해 이루어진다. 이때 서비스는 여러 에이전트들의 복잡한 행위들에 의해 구성된다. 또한 지능적인 서비스를 위해서는 에이전트들의 상태정보, 목적정보, 그리고 계획정보 등을 이용한다. 특히 계획정보는 에이전트들이 일련의 행위들로 구성된다. 하지만 계획수립을 위한, 기존 연구들 대부분은 정적으로 기술된 서비스 명세와 초기상태 정보를 이용하여 특정 목표를 만족시키는 단일 계획 생성 방법을 연구해왔다. 따라서 계획수립이 실행 도중에 기대하지 않은 네트워크 장애나 방해 등으로 서비스 수행을 실패하는 경우, 그 계획은 무효가 되고 다시 계획을 생성 해야만 한다. 그러나 다시 계획을 생성하기 위해서는 많은 시간을 소비하게 될 뿐만 아니라 태스크 중복이 불가피하므로 매우 비효율적이다. 이 논문에서는 강건한 계획수립과 그 계획을 실행하기 위한 효과적인 방법을 제안한다. 즉, 계획수립의 재생성을 피하기 위한 방법으로 단일 계획수립 대신에 실행 가능한 다중 계획들로 표현된 강건한 계획을 생성하는 것이다. 강건한 계획의 행위들이 실행되는 동안, 각 단계마다 실행 가능한 행위를 선택한 후, 그 행위를 실행한다. 그러나 선택된 행위가 실행결과를 낼 수 없을 경우, 대체 가능한 서브 계획 경로를 선택하여 실행한다. 강건한 계획을 표현하기 위해 페트리 넷 기반의 방법을 제안한다. 강건한 계획 생성 방법에서는 이용 가능한 모든 계획들을 입력으로 사용한다. 그 계획수립 방법은 HTN 계획수립기로 잘 알려진 JSHOP2 계획수립기내에 구현하였다. 계획 실행 방법으로는 주어진 강건한 계획에 대하여 행위들이 직접 실행하수 있도록 한다.며 용량에 의존하는 양상을 보였다. $H_2O_2$에 의해 유발(誘發)된 DNA의 손상은 catalase와 deferoxamine에 의해 억제되었지만 DPPD는 억제시키지 못했다. 배기음(排氣飮)은 $H_2O_2$에 의해 유발(誘發)된 ATP의 소실을 회복시켰다. 이러한 실험결과 $H_2O_2$에 의해 유발(誘發)된 세포(細胞)의 손상(損傷)은 지질(脂質)의 과산화(過酸化)와는 다른 독립적인 기전에 의해 일어남을 나타낸다. 결론 : 이러한 결과들로 볼 때 Caco-2 세포(細胞)에서 배기음(排氣飮)이 항산화작용(亢酸化作用)보다는 다른 기전을 통하여 Caco-2 세포안에서 산화제(酸化劑)에 의해 유발(誘發)된 세포(細胞)의 사망(死亡)와 DNA의 손상(損傷)을 방지할 수 있다는 것을 가리킨다. 따라서 본 연구(硏究)는 배기음(排氣飮)이 반응성산소기(反應性酸素基)에 의해 매개된 인체(人體) 위장관질환(胃腸管疾患)의 치료(治療)에 사용할 수 있을 가능성(可能性)이 있음을 제시하고 있다.에 이를 이용하여 유가배양시 기질을 공급하는 공정변수로 사용하였다 [8]. 생물학적인 폐수처리장치인 활성 슬러지법에서 미생물의 활성을 측정하는 방법은 아직 그다지 개발되어있지 않다. 본 연구에서는 슬러지의 주 구성원이 미생물인 점에 착안하여 침전시 슬러지층과 상등액의 온도차를 측정하여 대사열량의 발생량을 측정하고 슬러지의 활성을 측정할 수 있는 방법을 개발하였다.enin과 Rhaponticin의 작용(作用)에 의(依)한 것이며, 이는 한의학(韓醫學) 방제(方劑) 원리(原理)인 군신좌사(君臣佐使) 이론(理論)에서 군약(君藥)이 주증(主症)에 주(主)로 작용(作用)하는 약물(藥物)이라는 것을 밝혀주는

• Journal of Korea Technology Innovation Society
• /
• v.17 no.1
• /
• pp.146-173
• /
• 2014

Extant studies have explained that firm's innovations including technological product and process innovations contribute to its competitive advantage and growth, thereby supporting competitiveness and growth of industry. These studies, however, have focused mainly on the role and effect of technological change that is primarily measured by the patent numbers and R&D intensity. Aside from these traditional streams, there has been growing interest on the impact by various dimensions of innovation including non-technological innovations. Apart from the discussions on the dimensions and scope of innovation, stages or processes of innovation also have been studied. Extant studies on innovation process model, however, has limited its interests in the structure of the transformation of knowledge. This study have established a comprehensive model embracing operational and financial performance to investigate the causal paths between innovation and firm performance. Using multi-level generalized linear model with path analysis, this study have found results as follows: First, the processes from innovative activities to innovation output and outcomes including operational and financial performance at firm level were verified. Secondly, the influence of innovation decreases gradually as the distance away from the direct outputs of the innovation increase in the direction of financial outcomes. Third, the effect of innovation on the sales growth rate is higher for small businesses than for medium-sized businesses. The effect of innovation on the profit rate, however, is significant only for medium-sized businesses. For large businesses, innovation has no positive significant impact on any financial performance at all. Fourth, Fourth, the appropriability of innovation has positive impacts on innovative performance, patent applications, and operational performance.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.521-528
• /
• 2017

In this study, vertical loading tests were conducted to investigate the nonlinear behaviors of the fastening systems that have generally been used in the concrete track of domestic railway lines. Nonlinear load-displacement curve models were derived based on the test results. The uplift forces generated in the fastening systems were evaluated by applying the derived nonlinear models as well as the existing linear models. The influence of the factors on the maximum uplift force of the fastening system was analyzed through a parameter study on the distance between neighboring sleepers, the horizontal distance between the center of the bearing and the nearest fastening system from the deck end, and the height of the bridge girder. From the evaluation results it is known that, for economical track and bridge design, due to deck end deformation, it is necessary to consider the nonlinear behavior of the fastening system in the calculation of the uplift force of the fastening systems.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Journal of Bio-Environment Control
• /
• v.33 no.2
• /
• pp.88-98
• /
• 2024

This study provides basic data on the growth and production of seedlings produced in plant factories with artificial lighting by comparing seedling quality, growth and fruit characteristics, and production after transplanting cucumber seedlings according to environmental differences between plant factories with artificial lighting and conventional nurseries in greenhouse. The control group consisted of greenhouse seedlings (GH) grown in the conventional nursery before transplanting. Plant factory to greenhouse seedlings (PG) were grown for 9 days in a plant factory with artificial lighting and for 13 days in an conventional nursery. Plant factory seedlings (PF) were grown in a plant factory with artificial lighting for 22 days until planting. In terms of seedling quality, PFs had the highest relative growth rate and compactness and the best root zone development. After transplanting PFs tended to grow faster, the first harvest date was 2 days earlier than that of GHs, and the growing season ended 1 day earlier. The female flower flowering rate of the PFs was high, and the fruit set rate was of PF the lowest. The production per unit area was highest for PFs at 10.23kg Performance index on the absorption basis, the most sensitive chlorophyll fluorescence parameter, was highest at 4.14 for PFs at 4 weeks after transplantation. By comparing the maximum quantum yield of primary PS II photochemistry and dissipated energy flux per PS II reaction center electron at 4 weeks after transplantation, PFs tended to be the least stressed. PFs had the best seedling quality, growth, and production after planting, and fruit quality was consistent with that of greenhouse seedlings. Therefore, plant factory seedlings can be used in the field.