• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.447-450
• /
• 2010

In this study, the improved large-scale synthetic route for epinastine hydrochloride, the second-generation antihistamine, was developed. The original synthetic route involves the synthesis of an aminomethyl derivative, the main intermediate, and in this process hazardous materials such as very toxic phosgene and sodium cyanide along with the explosive and expensive aluminum chloride and lithium aluminum hydride were used. In order to improve the synthetic route, we developed industrially very useful process to prepare the aminomethyl intermediate by the synthesis of the phthalimidomethyl derivative first and easy removal of the phthalyl group using hydrochloric acid or methyl hydrazine, and hazardous materials and expensive reagents were excluded in this process.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.240-243
• /
• 2017

CAN (controller area network) suffers from data bottleneck since the number of in-vehicle electronic modules significantly increases. To mitigate this problem, CAN-FD (CAN with flexible data rate) has been proposed. Transmission speed is same with CAN in arbitration phase but much higher than CAN in data phase, which successfully achieves both compatibility and efficiency. In this paper, a CAN-FD controller was designed in Verilog HDL and it was implemented and verified in FPGA. The designed controller can perform CAN-FD version 1.0 and CAN version 2.0A, 2.0B. Synthesized in 0.18um technology, its size is about 46,300 gates.

• Journal of Korea Foundry Society
• /
• v.34 no.5
• /
• pp.156-161
• /
• 2014

This study is focused on the effect of $Al_2Ca$ as a modifier on eutectic Si modification of A356 alloy. Microstructural observation was carried out for as-cast, as-solution treated and as-aged samples. Solution treatment and aging were performed for 2, 4, 6 and 10 hrs at $540^{\circ}C$ and $170^{\circ}C$, respectively. Although A356 alloy, which $Al_2Ca$ was added, has no significant difference in as-cast phases with normal A356 alloys, it shows much more modified eutectic Si, grain refinement and improved tensile property both in as-cast and as-heat treated conditions. TGA result shows that $Al_2Ca$ added A356 alloy has a certain improvement in oxidation resistance.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.53-59
• /
• 2000

In this study aluminum casting experiments are carried out to reduce the grain size of a cast preform and to spheriodize its dendritic structure by adding Ti+B and Zr and to modify flaked eutectic silicon by adding Sr, And a finite element simulation is performed to determine an optimal configuration of the cast preform to be used in forging of a compressor piston for an automobile air-conditioner. When 0.15% Ti+B Zr and 0.05% Sr are added respectively into the molten aluminum alloy the finest grain in casting of the preform is obtained. It is confirmed that the optimal configuration of the cast preform predicted by FEM simulation is very useful for forging the compressor piston. After forging the cast preform of the compressor piston. the microstructure and the hardness of the cast preform is compared with those of the cast/forged product.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.615-622
• /
• 2020

Frangible bullets, which are shredded after impact on a target, reduce the possibility of both ricochet and unexpected injury in shooting training and in mission acts in dams, nuclear power plants, and cultural properties. Reducing the levels of hazardous materials in shooting ranges, such as lead, has become an important agenda for the government and environmental groups. In this study, the shape of a frangible bullet was designed for efficient shredding, and the safety and reliability were confirmed by actual firing under different process conditions. In addition, the physical characteristics, such as compaction pressure, density, and frangibility of each process, were compared by analyzing the microstructure of the sintered frangible bullet. The experiment revealed the smallest fragmentation after impact on the target under the following conditions: Cu-Sn 85:15; sintering temperature, 600℃; sintering time, one hour. Further development of the process conditions and experimental methods will contribute to the performance and environmental improvement of a frangible bullet.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.155-166
• /
• 2010

Studies on the production of cell-wall bound innerpolysaccharides (IPS) (soluble ${\beta}$-D-glucan) have been performed by use of suspended myelial cultures of Inonotus obliquus. This product has promising potentials as an effective antidiabetic as well as an immunostimulating agents. As a first step to enhanced production of IPS, Intensive strain improvement programs were carried out by obtaining a large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because about fivefold higher amount of protoplasts ($2.3{\times}10^6$ protoplasts/mL) could be recovered with relatively high regeneration rates of $10^{-2}{\sim}10^{-3}$ by applying a modified filtration method, as compared to the previously used trapping method. A basic protocol necessary for UV-mutation of the protoplasts was also developed, resulting in several overproducing variants with good fermentation properties. Since the amount of IPS extracted from the mycelial cell walls of I. obliquus turned out to be almost constant per g DCW, increase in cell mass was considered the most important factor for the enhancement in IPS production. Therefore, attempts were made to screen mutant cells showing rapid mycelial growth rate in the final suspended cultures. Notably, the mutant strains showing an active cellgrowth in the preceding solid growth cultures were observed to produce higher amount of IPS in the suspended fermentations as well. A striking mutant, OBLQ756-15-5 strain, obtained from the survivors of a harsh UV-treated condition (97% death rate) was found to stably produce as high cell mass as 22 g DCW/L in the final fermentations. Currently, this strain is being tested for development of a scaled-up fermentation process for mass production of IPS.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.4
• /
• pp.460-465
• /
• 2006

This study was conducted to investigate the isoflavone contents including daidzein and genistein in soy sauces made with whole grain soybean Meju(WGSM), comparing with defatted Meju(DM) du.ins fermentation. Total isoflavone contents in 2 soy sauces made with DM, Control and product A, increased with period of fermentation and were 15 and 4.3 times higher after 180 days of fermentation than on the day before fermentation respectively. Meanwhile, 2 soy sauces made with WGSM, product B and C, had the highest amounts with $20.53{\mu}g/g\;and\;19.52{\mu}g/g$ of isoflavones on the day before fermentation respectively, and then decreased with fermentation time. High amounts of isoflavones were detected in 20 days of fermentation of soy sauce which made with WGSM and wheat Meju(product D). Daidzein was the largest amounts in isoflavone contents, regardless of total or free isoflavone types. The level of daidzein increased with fermentation time in 2 soy sauces made with DM, Control and product A, whereas 2 soy sauces made with WGSM, product B and C decreased with fermentation time, instead of increasing of genistein contents.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.287-293
• /
• 2015

This paper discusses quantitative analyses of patents published for cathode active materials for lithium secondary batteries based on layer structure. Numbers of the patents analyzed were 356, 1628, 2915, 439, and 611 for Korea, USA, Japan, Europe, and PCT (WO), respectively. Trends of improved technologies and alternative technologies concerning lithium cobalt, from 1991 to 2012 were examined and the patent shares distribution of each principal countries about lithium secondary battery technologies were also scrutinized. The number of patents for the mixed structure technology and next-generation lithium secondary battery technology increased numerously in 2000. Particularly in 2005, lots of patents were also published and SANYO (34.5%), SONY (17.5%), LG (7%), and SAMSUNG (5.5%) possessed leading patent applicants. Finally, the research focus on cathode active materials for lithium secondary batteries was confirmed by bubble chart distributions for component-by-step process.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.71-79
• /
• 2007

The effects of synthetic bulking agent (SBA) on the composting reaction were investigated with a lab-scale composting reactor. The positive effects of SBA addition were observed in composting reactions where relatively tough composting conditions like high water content and no addition of seed compost were provided. Such effects were assumed to be caused by the enhanced free air space in compost mixture. It was additional benefits of using SBA, a bulking agent, that the amount of saw dust, another bulking agent, could be reduced to 50% compared to composting without SBA. Although SBA would be used as a bulking agent, two options are thought to be very important to ensure composting reaction well. One is that optimal water content should be maintained around 60%. The other is that saw dust is inevitable bulking agent to prevent food waste from lumping, so combination use of two ones are necessary.

• Journal of Powder Materials
• /
• v.11 no.1
• /
• pp.8-15
• /
• 2004

The basic concept of functionally gradient materials (FGM) is to fabricate materials type having possibilities of applications in various fields by changing their intrinsic properties with continuous gradient. The present communication has reviewed the developments and applications of various FGMs designed for improved thermo-mechanical properties, in which the thermal protective and wear resistant materials are especially focused. Effects of thermo-mechanical properties and limits of FGMs designed for high temperature applications were mainly understood in terms of residual stress evolved from the design and fabrication. In addition, FGMs applied in structural parts were also introduced and discussed in terms of typical fabrication method for FGMs.