• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.131-153
• /
• 2016

The purpose of this study was to derive evaluator's role and capability for institution accreditation evaluation of NCS-based vocational competency development training. This study attempted to explore in various ways evaluator's minute roles using Delphi method, and to derive knowledge, skill, attitude and integrity needed to verify the validity. To the end, this study conducted the Delphi research for over three rounds by selecting education training professionals and review evaluation professions as professional panels. From the results, roles of evaluators were defined as the total eight items including operator, moderator-mediator, cooperator, analyzer, verifier, institution evaluator, institution consultant, and learner, and the derived capabilities with respect to each role were 25 items in total. The area of knowledge included four items of capabilities such as HRD knowledge, NCS knowledge, knowledge of vocational competency development training, and knowledge of training institution accreditation evaluation, and the area of skill comprised fourteen items of capabilities such as conflict management ability, interpersonal relation ability, word processing ability, problem-solving ability, analysis ability, pre-preparation ability, time management ability, decision making ability, information comprehension and utilization ability, comprehensive thinking ability, understanding ability of vocational competency development training institutions, communication ability, feedback ability, and core understanding ability. The area of attitude was summarized with the seven items in total including subjectivity and fairness, service mind, sense of calling, ethics, self-development, responsibility, and teamwork. The knowledge, skill and attitude derived from the results of this study may be utilized to design and provide education programs conducive to qualitative and systematic accreditation and assessment to evaluators equipped with essential prerequisites. It is finally expected that this study will be helpful for designing module education programs by ability and for managing evaluator's quality in order to perform pre-service education and in-service education according to evaluator's experience and role.

• MALSORI
• /
• no.37
• /
• pp.119-128
• /
• 1999

이 논문의 목적은 일본 학생들의 영어 청취 능력에 대한 확실한 평가를 내릴 수 있는 청취판별테스트를 개발하는 데에 있다. 이 테스트를 통하여 일본사람들이 범하는 청취 오류를 평가, 분석하고 일본어의 음성·음운체계가 이러한 오류에 미치는 영향을 평가한다. 테스트의 결과는 청취 및 발음훈련에 적용될 수 있으므로 일본인의 영어 능력을 향상시키는데 공헌할 수 있을 것이다.

• Journal of Korea Fair Competition Federation
• /
• no.117
• /
• pp.2-7
• /
• 2005

연예계에 있어서 강자와 약자의 지위는 고정된 것이 아니라 대중의 인기라는 매우 불안정한 상황에 의존한다. 그러므로 연예인 매니지먼트 전속계약의 효력에 대해서는 단순히 강자와 약자라는 고착화된 논리로서 접근할 것이 아니라 기획사와 소속 연예인들 간에 상생이라는 관점에서 신인발굴에서부터 훈련 그리고 스타로서 뜬 이후의 상황 등을 종합적으로 고려하여 그 불공정성 여부를 가려내어야 할 것이다. 그리고 이러한 종합적인 기준에 기초해서 당사자간에 합당한 계약조항을 표준계약이나 표준약관의 형식으로 제정하여 보급하는 것도 분쟁의 예방에 있어서 좋은 방법이 될 것이다.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.136-138
• /
• 2008

PCBs는 잔류성유기오염물질(POPs) 중 하나로 변압기 절연유 등에 주로 사용되어 왔으나 환경 및 인체유해성이 밝혀짐에 따라 생산 및 사용이 금지된 물질로써 국내에서는 절연유 중 PCBs 분석이 전력산업과 변압기 절연유의 재활용 및 처리 분야에서 매우 중요한 문제로 대두되고 있다. 그러나 현행 폐기물공정시험방법은 분석절차가 까다롭고 고가의 분석비용이 소모되며 고도로 훈련된 분석인력이 필요하다. 이에 본 연구에서는 보다 저렴한 비용으로 신속하게 PCB를 분석할 수 있는 간이 분석법을 개발하고자 하였다. 현행 폐기물공정시험방법에 대한 기술적 검토를 수행하여 복잡한 전처리 절차를 축소하고 번거로운 정성 및 정량작업을 간소화한 결과, 분석비용은 약 1/2, 분석시간은 약 1/3로 줄일 수 있었다. 본 연구에서 개발한 간이 분석법을 현행 공정시험법과 적절히 병행하여 사용 할 경우 폐 변압기의 신속한 분석이 가능하여 분석비용 절감에 따른 큰 경제적 효과가 있을 것으로 예상된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.54-71
• /
• 1990

The fabrication of ceramic machine components by injection molding(CIM : Ceramic Injection Molding) is critically dependent on the shaping and binder extraction techniques. Injection molding is of keen interest to ceramic industries because CIM is suitable for making an intricate shape and manufacturing cost is lower than other process when production scale is large. The success of the molding process is dependent on the correct formulation of the organic vehicle and the achievement of optimum filler loading. Fine alumina powders and polyethylene binder systems were employed to prepare moldable blend then produce a simple specimen by compression molding. Flow characteristics of the mixture was evaluated by viscosity measurement. Optimum binder system and ceramic volume loading for injection molding were determind. A good debinding technique was utilized to improve the quality of debinded parts and save the debinding time. The simple ceramic part was successfully sintered after debinding and its microstructure examined with SEM revealed good consolidation.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.542-549
• /
• 2023

Since the growing interest in surrogate modeling, there has been continuous research aimed at simulating nonlinear chemical processes using data-driven machine learning. However, the opaque nature of machine learning models, which limits their interpretability, poses a challenge for their practical application in industry. Therefore, this study aims to analyze chemical processes using Explainable Artificial Intelligence (XAI), a concept that improves interpretability while ensuring model accuracy. While conventional sensitivity analysis of chemical processes has been limited to calculating and ranking the sensitivity indices of variables, we propose a methodology that utilizes XAI to not only perform global and local sensitivity analysis, but also examine the interactions among variables to gain physical insights from the data. For the ammonia synthesis process, which is the target process of the case study, we set the temperature of the preheater leading to the first reactor and the split ratio of the cold shot to the three reactors as process variables. By integrating Matlab and Aspen Plus, we obtained data on ammonia production and the maximum temperatures of the three reactors while systematically varying the process variables. We then trained tree-based models and performed sensitivity analysis using the SHAP technique, one of the XAI methods, on the most accurate model. The global sensitivity analysis showed that the preheater temperature had the greatest effect, and the local sensitivity analysis provided insights for defining the ranges of process variables to improve productivity and prevent overheating. By constructing alternative models for chemical processes and using XAI for sensitivity analysis, this work contributes to providing both quantitative and qualitative feedback for process optimization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4924-4931
• /
• 2011

This research performed to evaluate a production processes reporting by the HACCP system of green vegetable juice products, containing lactic acid bacteria, stage of processing raw materials agricultural products and production facilities of general bacteria and pathogenic micro organism. General bacteria are found from four samples of storage of agricultural products at process stage and water was detected 8.67~14.67 CFU/ml. However, all samples were detected less than 105 CFU/ml as a legal standards after the process of UV sterilization. For the outcome of experiment of E.coli, E.coli O157:H7, B.cereus, L.moonocytogenes, Salmonella spp, Staph.aureus as the food poisoning bacterial, E.coli was detected until UV pre-step process in storage process and B.cereus was detected partly till 1st washing. Since all bacterial, Yeast and Mold are detected in main materials, pre-control method is a necessary to establish for decreasing with a number of initial bacteria of main materials and it is considered to establish the effective ways of washing and sterilization such as production facilities for cross contamination prevention of bacteria and Sthaphylococcus. Based on above results, the process of UV sterilization should be managed with CCP as an important process to reduce or eliminate the general and food poisoning bacterial of green vegetable juice products, including lactic acid bacteria. Therefore, it is considered to need an exhaustive HACCP plan such as control manual of UV sterilization, solution method, verification, education and training and record management.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.201-207
• /
• 2001

Construction accidents are very serious comparing to its workers. These kind of accidents consist in the particularity of construction. The accident prevention task in construction requires both into immediate approach and longer range approach of instruction, training and education. Information concerning each individual accident, if the information of investigation has been done well, it provides information of prevention accident. At this point, this paper by examining 800 cases of serious accident researched by the Korea Occupational Safety and Health Agency from Jan. 1992 to Dec. 2000 specifically targeting apartment and building construction develops the construction information system to suggest the proper information of construction safety.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.259-261
• /
• 2021

In this paper, VR smart factory XR content tailored to process execution scenarios was produced to reflect the characteristics of XR content, which is highly dependent on HDM, unlike general-purpose content software for UX/UI design and usability evaluation of digital twin-based XR content in manufacturing. HMD equipment called Qculus Quest2 was used to perform the process execution task scenario for XR content, and content production was made through Unity Engine and SteamVR Plugin.

• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.41-47
• /
• 2012

As a core process in the manufacture of state-of-the-art industrial technologies such as semiconductor and LCD, a clean room is the most important process which can affect the performance and quality of products drastically. Nevertheless, scientific research on comprehensive safety measures from a fire protection standpoint is not being carried out in Korea. This study aims to derive measures to improve smoke control systems by identifying performance and problems of smoke systems installed in clean rooms as an LCD manufacturing process and analyzing fire and evacuation simulations considering several scenarios. As a result of analysis of fires and smoke in a clean roomas an LCD manufacturing process, it is found to be necessary to stop air handling units through interlocking in case of a fire and exhaust smoke out of the room through the top of FAB in consideration of buoyancy of smoke. It is also found to be necessary to install quick response sprinkler heads and accessories to accelerate the response time, because the heat-accumulating performance of sprinkler heads decreases in this application. Despite its low density of dwelling due to the automation process, clean room is characterized by an array of complex production equipment and working environment requiring dustproof clothes, which makes it difficult to acquire evacuation safety performance. Thus, thorough control of danger factors in processes and periodic education and training are required. It is also necessary to establish a level of domestic technologies equivalent to the level of standards of advanced countries in fire protection.