• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.98-111
• /
• 2015

Urban environmental problems such as flooding, depletion of ground water, pollution of urban streams and the heat island effect caused by urban development and climate change can be mitigated by the improvement of the urban water cycle. For the effective planning of water cycle management it is necessary to establish aerial Hydrotope Maps, with which we can estimate the status and change of the water allowance for any site. The structure of the German water balance model BAGLUVA, which is based on soil and vegetation, was analyzed and the input data and boundary condition of the model was compared with Korean data and research results. The BAGLUVA Model consists of 5 Input categories (climate, land use, topography, soil hydrology and irrigation). The structure and interconnection of these categories are analyzed and new concepts and implementation methods of topographic factor, maximum evapotranspiration ratio, effective rooting depth and Bagrov n parameter was compared and analyzed. The relation of real evapotranspiration ($ET_a$)-maximum evapotranspiration ($ET_{max}$) - precipitation (P) was via Bagrov n factor represented. The aerial and land use oriented Hydrotope Map can help us to investigate the water balance of small catchment areas and to set goals for volume of rainwater management and LID facilities effectively in the city. Further, this map is a useful tool for implementing water resource management within landscape and urban planning.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.118-118
• /
• 2012

수자원의 효율적 이용 및 관리는 심화되고 있는 기후변화에 선제적으로 대응하고 발생가능한 물위기에 대비하기 위한 필수조건이다. 그 중 가장 핵심이 되는 요소는 댐에 저수된 물을 효과적으로 이용하는 것, 즉 댐 건설목적에 따라 시간 및 공간별로 적절하게 할당시키는 것이라고 할 수 있다(Kim, 1998). 그러나 단일 댐의 운영과는 달리 수계내 댐군의 연계 운영은 매우 복잡하고 어려운 문제이다. 연계된 댐들간 저수 상황을 고려하여 유역내 시 공간적인 용수 수요의 지속적인 충족을 위하여 유입량 예측의 정확성을 높이도록 하고, 상류 댐에 최대한 저류하도록 하며, 여수로 방류 같은 불필요한 방류를 최소화 하고, 서로 상충되는 목표를 갖고 있지만, 홍수용량 및 발전수위를 최대로 확보하도록 하여야 한다. 이처럼 댐 운영을 위한 실제 상황은 단일 목적에 의한 최적화와는 달리 여러 상충되는 목적 및 구성 요소들간의 타협, 조정을 필요로 한다. 댐군의 연계운영 문제는 1960년대 초부터 현재까지 활발히 연구가 진행되어 온 분야 중 하나이나 문제의 복잡성과 어려움으로 인해 아직까지도 최선의 방안을 제시하기 어려운 문제이다(ReVelle, 2000). 이를 위한 방법은 시뮬레이션 모형 활용기법과 최적화 모형 활용기법으로 대별할 수 있으며 각 방법의 서로 다른 구조적 특성과 장단점으로 인하여 이원화된 체계로 사용되는 것이 현재의 국내 실정이다. 대부분의 실무에서는 이해도도 쉽고, 비교적 결과를 빨리 도출할 수 있는 시뮬레이션 기반의 모형을 활용하며 대표적으로 HEC-5, K-ModSim, HEC-ResSim 등이 활용되어왔다. 반면, 학계에서는 DP, MIP, SLP, SDP 등 최적화기법을 댐운영에 활용 할 것을 제안하고 있지만, 활용에 대한 거부감이 남아있는 것이 현실이다. 본 연구에서는 시뮬레이션과 최적화기법의 원론적 비교를 통해 각 방법의 장단점과 한계점을 분석하고, 왜 이원화된 사용체계로 되었는지에 대한 고찰과 이에 대한 해결책으로 시뮬레이션모형의 장점과 최적화기법의 장점을 결합한 모형을 제안한다. 국내에는 Kim and Park(1998)이 시뮬레이션 기반의 최적화 모형 CoMOM(Coordinated Multi-Reservoir Operating Model)을 개발하였으며, 이후 21C프론티어 연구사업(2001-2011)에서 모형의 보완수정 검증을 통해 실무 활용도를 높여 왔다. 본 연구를 통하여 거부감의 원천을 추적해 보고, 타당한 이유가 있는지 대한 것을 심층 분석해보고, CoMOM모형과 시뮬레이션 모형, 다른 최적화 기법들과의 원론적 비교를 통해 각 방법들의 효율적인 활용방안과 최적화모형의 구체적인 활용방안을 제시하고자 한다.

• Review of Culture and Economy
• /
• v.21 no.2
• /
• pp.53-88
• /
• 2018

Among the cultural industries, the game industry is the most economically valuable industry. It has been about twenty years since the game policy has been implemented and the game laws have been enacted. If the law is a willing expression for the realization of the policy, the orientation of the game policy can be grasped through revision of the game laws. SOUND RECORDS, VIDEO PRODUCTS, AND GAME SOFTWARE ACT, established in 1999, and GAME INDUSTRY PROMOTION ACT, which was enacted in 2006, are regulated by many revisions. In this paper, I try to understand the direction and meaning of Korean game policy(classification, game dysfunction, gambling, industry growth) through the contents of the revision of the game law for 20 years. The game policy shown through the amendment of the game law is intended to protect the game by regulating the game, and to protect the game user by preventing the gambling and preventing the game dysfunction, and to increase autonomy of users and choice of producers by switching to self rating system, and based on this, an environment for continuous industrial growth is created. In the future, game policies should consider cooperation with social areas beyond game-specific areas. On the other hand, it needs to respond to new agendas such as polarization of industrial structure, fair environment, employment environment.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.9 no.1
• /
• pp.121-132
• /
• 2007

1. 버섯종균 개선 버섯의 품질과 수량을 좌우하는 주요 요인은 종균의 활력이다. 그러나 라오스에서는 종균의 활력이 낮아 조그마한 100cc 병에 배양완성하는데 14일이 소요되는 등 볍씨종균의 균사생장과 균사밀도가 매우 낮음을 확인하였다. 따라서 100cc 병을 1000cc 비닐봉지로 개선하여 입봉하는데 소요되는 시간을 10배로 단축 개선하였다. 또한 곡립종균을 액체종균으로 대처한 결과 균사생장속도가 2배가 빨랐으며 작업속도가 4배가 빨라졌다. 2. 버섯배지제조 방법 개선 미세하고 건조한 톱밥에 수분을 첨가하는데 50%이하의 수분함량을 유지함으로서 균사가 표면에만 자라고 있는 것을 확인하고 버섯 배지제조 시 물리성을 개선하기 위하여 볏짚을 잘게 잘라 10%~100%까지 혼합하는 실험을 실시하였다. 그 결과 톱밥 50%에 볏짚 50% 혼합하는 것이 균사생장 속도와 밀도가 좋았다. 또한 왕겨도 30%정도 혼합한 배지처리에서 가장 좋았다. 또한 수분함량도 65%로 향상하여 혼합하도록 지도하였다. 3. 버섯배지살균 방법 개선 라오스에서는 왕겨를 태워 살균을 실시하고 있다. 화력이 약하여 살균한 배지에서 볍씨의 새싹이 돋아나오는 경우를 발견하였다. 이는 살균이 제대로 되지 않았음을 의미한다. 그래서 이동식 직화식 살균을 권하였으나 시설자재값이 감당이 안되어 엄두를 내지 못하였다. 따라서 가스버너를 도입하여 단시간에 화력을 높여 살균을 실시하므로서 세균의 증식을 막아 균사생장속도를 빠르게 하고 균사량의 축적을 높이는데 교육을 하고 컨설팅을 실시하여 개선하였다. 4. 병뚜껑과 형성틀을 대체한 링을 이용한 입봉작업시간 단축과 비용절감 버섯봉지에 배지를 담는 입봉작업을 할 때 병뚜껑과 그의 형성틀을 끼우고 솜을 조금 뜯어 톱밥배지 위에 놓는 작업을 한다. 이는 아주 잘못된 방법이다. 왜 그렇게 하는가하는 것은 이해가 간다. 그렇게 하는 이유는 접종할 때 실내에서 그냥 접종하므로 뚜껑을 열때 보호막 역할을 할 것으로 생각하고 그렇게 하는데 천만의 말이다. 어떻든 뚜껑을 열면 잡균이 들어가는 것은 마찬가지이다. 그래서 이 솜을 배지표면에 놓으면 마른 솜이 그렇지 않아도 수분이 적은데 이 솜이 수분을 또 빼앗아 가버린다. 그래서 균사생장이 늘려 15일이면 다 자라야할 균사배양기간이 한달씩 걸려도 표면만 살짝 잘린 결과가 빗어진다. 이렇게 표면만 균사가 사탕 발림식으로 자라면 품질이 저하되고 수량이 적고 병해충에 저항력이 약해지게 된다. 따라서 뚜껑과 형성틀, 솜을 모두 없애고 봉지 상단부위를 U자형으로 꺽어서 링을 끼우는 방법을 실제로 실험으로 보여준 결과 작업능률이 5배로 빠르고 작업공정이 빨라짐으로서 세균번식밀도가 적어 균사생장 속도가 2배로 빨라졌고 수량이 배가됨을 증명하고 보급하여 많은 호평을 받았다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.2
• /
• pp.15-25
• /
• 2024

In this study, the regeneration effect of pressurized water and ultrasonic cleaning was investigated for contaminated filter cloth from the sewage sludge filter press process. For this purpose, contaminated filter cloth was collected from a 3-ton sewage sludge hydrothermal carbon treatment filter press. First, the contamination characteristics were analyzed. According to the location of the filter cloth, air permeability and unit mass were measured, and compared with the values of a new filter cloth. Next, the results were mapped over the entire area to evaluate the contamination characteristics. Finally, pressure cleaning at 3 bar and ultrasound at frequencies of 34, 76, 120, and 168 kHz were performed on the contaminated filter cloth. In addition, the cleaning efficiency was evaluated by 3 levels of contamination degree. As a result, pore contamination occurred mainly at the bottom and both sides of the filter cloth, where the filter material was continuously injected and compressed. Surface contamination appeared evenly over the entire area. As a result of washing, air permeability increased by 1.3-3.1%p and contaminant removal was by 2.7-4.4% under pressure. In ultrasonic cleaning, air permeability increased by 12.5-61.5%p and contaminants were removed by 2.7-29.2%. In ultrasonic cleaning the lower the frequency, the higher air permeability and contaminant removal rate. Also, The higher pore contamination level, the better the air permeability improvement and contaminant removal.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.36-44
• /
• 2024

Copper electrodeposition technology is essential for producing copper films and interconnects in the microelectronics industries including semiconductor packaging, semiconductors and secondary battery, and there are extensive efforts to control the microstructure of these films and interconnects. In this study, we investigated the influence of crystallographic orientation on the local plastic deformation of copper films for secondary batteries deformed by uniaxial tensile load. Crystallographic orientation maps of two electrodeposited copper films with different textures were measured using an electron backscatter diffraction (EBSD) system and then used as initial conditions for crystal plasticity finite element analysis to predict the local plastic deformation behavior within the films during uniaxial tension deformation. Through these processes, the changes of the local plastic deformation behavior and texture of the films were traced according to the tensile strain, and the crystal orientations leading to the inhomogeneous plastic deformation were identified.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.3
• /
• pp.194-200
• /
• 2000

The amount of swine wastewater reaches about $197,000m^3$ per day at live-stock houses in the whole country. A half of the swine wastewater resources are too small to be restricted legally. This untreated wastewater causes the eutrophication in the water bodies. In case of swine wastewater treatment, the solid-liquid separation must be performed because feces(solid phase) and urine(liquid phase) have large differences in nitrogen and phosphorus concentration. It is necessary to assess exactly the concentration of the pollutants in swine wastewater for planning the wastewater treatment facilities. A full-scale operation was carried out in K city and the plant is consists of conventional plant, the supplementary flocculation basin of chemical treatment process and $anaerobic{\cdot}aerobic$ basin for nitrogen removal. The improved full-scale swine wastewater treatment plant removed the $1,500{\sim}3,000mg/l$ of total-nitrogen(T-N) to 120mg/l of T-N and $131{\sim}156mg/l$ of total-phosphorus(T-P) to $0.15{\sim}1.00mg/l$ of T-N. Accordingly, as a results of operational improvement, the removal efficiencies of T-N and T-P were over $92{\sim}96%$, 99%, respectively. The continuous supply of organic carbon sources and the state of pH played important roles for the harmonious metabolism in anaerobic basin and the pH value of anaerobic basin maintained at about 9.0 for the period of the study.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.985-996
• /
• 2006

As the internet technologies develop, the geographic information system environment is changing to the web-based service. Since geospatial information of the existing Web-GIS services were developed independently, there is no interoperability to support diverse map formats. In spite of the same geospatial information object it can be used for various proposes that is duplicated in GIS separately. It needs intelligent strategies for optimal replica selection, which is identification of replication geospatial information objects. And for management of replication objects, OMG, GLOBE and GRID computing suggested related frameworks. But these researches are not thorough going enough in case of geospatial information object. This paper presents a model of location service, which is supported for optimal selection among replication and management of replication objects. It is consist of tree main services. The first is binding service which can save names and properties of object defined by users according to service offers and enable clients to search them on the service of offers. The second is location service which can manage location information with contact records. And obtains performance information by the Load Sharing Facility on system independently with contact address. The third is intelligent selection service which can obtain basic/performance information from the binding service/location service and provide both faster access and better performance characteristics by rules as intelligent model based on rough sets. For the validity of location service model, this research presents the processes of location service execution with Graphic User Interface.

• Journal of the Speleological Society of Korea
• /
• no.95
• /
• pp.35-49
• /
• 2009

Ever since the beginning of time, caves not only have offered a place to live for humans but they have also been used as cultural spaces. That is, in the event of making some sounds in a location within the cave, the sound that is created is greatly magnified and sounds out as if it is being amplified from a giant megaphone. This, as we well know it, is known as the resonance effect. Here, the cave itself appears to function as a massive wind instrument. Especially in cases like the Altamira Cave (Spain) where cave paintings were found, the point where the cave drawings were found has commonalities in that it is a wide space and that it is usually discovered together with flutes and drums that are made with mammoth bones. We need to focus on this point. We can infer from these facts that the prehistoric people have carried out cultural activities along with their incantation rituals within those caves. In the meantime, amongst the Korean traditional arts, in the case of pansori which is a representative vocal genre, there have been examples where caves were used as practicing locations for those people who are training to perfect their singing. This is known as toguldoggong(土窟獨功) which literally means 'obtaining one's own art by oneself in the earth cave by practicing incessantly'. This process along with pokpodoggong (瀑布獨功) (same as above except that the location is by the waterfall) is the final training stage in order to become a recognized virtuoso on the part of the apprentice. This could be compared to the final annealing and finishing process of producing a metalwork. This has been a long tradition followed by most Korean traditional artists in order to perfect their sound which is harmonious with nature within natural surroundings. By honing in on this point, I have come to think about this matter repeatedly while coaching the university students in vocal singing. In short, I came to the conclusion that "the making of natural sounds will be obtained naturally within natural surroundings like caves!" Consequently, The Society for Studying Cave Sounds was inaugurated on January 1992 along with some of my students. We made use of times like vacations to go around exploring caves all over Jeju and carried out investigations of sounds along with cave exploration on an experimental basis. After 5 years, in September of 1997, we were able to host the first ever cave concert domestically at the Whale Nostril Cave(東岸鯨窟) on Wu-do. After that, we have been hosting the cave concert once every year. We have achieved a record of a total of 14 cave concerts until 2009 of this year. Out of these, 2 were held in Seokhwaeam Cave in Kangwon Province, another two were held in Manjang Cave which is a lava cave, and the remaining 10 were held in the Whale Nostril Cave of Wu-do. Along with that, I have carried out a special recording for the production of a cave music CD in May of 1999. This paper was written and organized by using the main materials that were derived from the experiences of using caves as concert halls in the past. It is hoped that this cave concert will offer a very unique experience to tourists who come to Jeju every year and give them the best possible superior natural sound effect that only Jeju caves can offer.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.