• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.200-200
• /
• 2001

백판지 면성은 표면 백색도의 변이, 불투명도의 변이, 광택도, 거치름도, 표면 지합, 표면 요철 등 다양한 인자들로 표현되고 있다. 인쇄소에서는 인쇄를 하기 때문에 화선 부에서의 백색도나 불투명도 등은 크게 불만 요소로 작용하지는 않으나 표면 요철의 경우에는 인쇄 후 화선부에서도 나타나기 때문에 고객 불만의 한 요소로 인식되어 진 다. 따라서 본 연구에서는 백판지 면성의 여러 인자 중 표면 요철의 평가에 대해 다루 고자 하였다. 백판지 표면 요철을 시각적으로 나타내기 위한 방법으로 3-Dimensinal topography를 얻을 수 있는 Zygo와 Stylus를 이용, FFT 변환을 통하여 2-dimensional topography를 얻는 방법이 연구되었다. 그러나 기자재 비용, 측정 시간 등의 문제 등으로 표면 요철 을 평가하기 어려운 점이 있다. 본 연구에서는 백판지를 T APIO를 이용하여 O.2mm간격으로 두께를 측정하였고 A verage slope와 Profile length라는 개념을 도입하여 수치 적으로 표면 요철을 정 량화 하였다. Average slope는 1mm 간격으로 이동하였을 때 높이의 편차를 평균하는 값이다. 또 한 Video eam을 이용하여 표면 요철의 형태를 촬영하여 시각적으로 판단할 수 있도록 하였다. 위의 측정 방법으로 국내, 외 12개의 Sample에 대해 Profile length와 Average s slope를 계산하였다. 고객의 주관적 평가를 의사결정 방법 중 하나인 AHP법을 이용하여 주관적인 정성 평가를 수치적으로 정량화할 수 있었으며 실제 측정 결과와 비교, 상관분석을 실시 하 였다. 고객의 평가 결과와 Profile length, average slope의 상관성을 분석한 결과 A Average slope에서 유의성 있는 상관성을 얻을 수 있었고 표면 사진을 비교하였을 때 C Coating 방식 등을 유추할 수 있었다. 이러한 평가 방법을 현장에 적용하였으며 그 결과, 공정 개선 전, 후의 표변을 측정, 개선 유무를 쉽게 판단할 수 있었다.

• Microbiology and Biotechnology Letters
• /
• v.20 no.2
• /
• pp.178-182
• /
• 1992

For an industrial-scale purification and production of cephalosporin C from a culture broth of Ceplzalos#mium nmemonium CSA-2.8A3 mutant, ultrafiltration, column chromatography, reverse osmosis, and spray drying were empolyed. Above 90% of yield and high purity of cephalosporin C were obtained through WA-30, HP-20, XAD-2000 and SK-1B column chromatographies. Especially, in the tendom operation of the columns, the recovery yield was increased up to 96%. The purified cephalosporin C was stable at $4^{\circ}C$ and in acidic condition, while it was unstable at room temperature and in alkaline condition at pH above 8.0. Cephalosporin C powder or a final product prepared by spray drying contained 85.554 of sodium cephalosporin C, 6.3%' of water, 4.63% of free $Na^+$ ions. and traces of metal ions.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.175-179
• /
• 2005

A novel, simple and broadband $180^{\circ}$ bit X-band phase shifter was proposed and fabricated in a standard micromachining process. It is composed of two $90^{\circ}$ parallel-coupled lines; one of which is shorted and the other is grounded. Design equations for the proposed $180^{\circ}$ bit phase shifter are derived by the method of even and odd mode analysis. Based on design equations, $180^{\circ}$ bit phase shifter was designed and fabricated to operate from 7 to 13 GHz with ${\pm}5^{\circ}$ of phase deviation.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.702-707
• /
• 2006

There have been certain extent of material inventory in construction site because of difficulties in ordering by small quantity, strategy of securing future requirements and prevention of delay. However, carrying these inventory entails a financial cost called inventory holding cost and decrease construction productivity, so proper inventory management in construction industry is important for construction efficiency and cost reduction. This study tries to find analytical method of inventory management. It includes ordering decision which decide how much to order and when to order. Setting these strategies including deciding safety inventory, input and ouput variability are able to controled.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.809-815
• /
• 2014

The induction heating bending process, which has been recently applied to nuclear piping, can generate residual stresses due to thermomechanical mechanism during the process. This residual stress is one of the crack driving forces that have important effects on crack initiation and propagation. However, previous studies have focused only on geometric shape variations such as the change in thickness and ovality. Moreover, very few studies are available on the effects of process variables on residual stresses. This study investigated the effects of process variables on the residual stress distributions of induction heating bended austenitic stainless steel (316 series) piping using parametric finite element analysis. The results indicated that the heat generation rate and feed velocity have significant effects on the residual stresses whereas the moment and bending angle have insignificant effects.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.1 s.13
• /
• pp.90-96
• /
• 2003

The purpose of this study is to present an improvement building construction process by using prefabricated materials. The current slab form work has waste factor by unnecessary process and not complete integration with the finishing process. Therefore the study used value stream analysis methodology for effective improvement of slab form work process. The main contents of the study are as follows; 1) Non-value adding activities were found at existing slab form work process by current state mapping(CSM) 2) Future state mapping(FSM) suggest process Integration to slab form work. 3) Slab form work is analyzed reduction time-cost by prefabricated material. The study recommends that, as a future research, development of tool and technique for the non-value adding activities are eliminated in building construction and application of prefabricated material should be increased.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.125-133
• /
• 2000

Specific carotenoids and astaxanthin biosynthesis power of Phaffia rhodozyma mutant 876, which was obtained after NTG a and UV treatments, was higher than those of the wild type by 40% and 50%, respectively. The mutant strain did not show t the catabolite repression even at 22% (w/v) glucose concentration. The optimum C{N ratio was 2.0, and the optimum t temperature and initial pH were $22^{\circ}C$ and 6.0, respectively. 80th cell growth and astaxanthin formation decreased drastically a as the fermentation temperature was increased over $22^{\circ}C$, whereas they were comparable in the pH range between 5.0 and 7 7.0. Inoculum size did not affect the final cell density nor the carotenoids biosynthesis, and 3%(v/v) was selected as optimal. H Higher dissolved oxygen concentration facilitated astaxanthin biosynthesis, and aeration rate of 1.0 v/0/m and agitation speed of 400 rpm were selected as optimum. The final cell dens때 of 43.3 g/L and the volumetric astaxanthin and carotenoids concentrations of 110.6 mg/L and 149.4 mg/L, respectively, were obtained. The specific carotenoids concentration was 3.45 m mg{g-yeast(dry). Yx/s and Yp/s values of 0.37 and 1.08 were obtained. The result of this study will provide basic information u useful for mass production of astaxanthin from P. rhodozyma fermentation.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.214-222
• /
• 2018

Alane(aluminum trihydride, $AlH_3$) is a candidate material involving high energetic capacity for solid propellant or explosives. In this study aluminum trihydride-etherate ($AlH_3{\cdot}(C_2H_5)_2O$) was synthesized through a wet process, and solid alane was extracted by controlled crystallization. Alane crystals were grown during the crystallization step with phase conversion of aluminum trihydride-etherate to alane using an anti-solvent. Stable crystal forms were found by a 2 hour crystallization process at $85^{\circ}C$. Finally the extracted solid aluminium trihydride consisted mainly of ${\gamma}-type$ with $50-100{\mu}m$ in size.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1869-1871
• /
• 2001

DNA 센서의 중요한 역할 중의 하나는 염기서열을 분석함으로써 유전적인 질병이나 돌연변이를 찾아낸다는 점이다. 염기서열 분석법으로 질량, 광학, 전기 화학적 측정법 등이 있는데, 그 중 전기 화학적 측정방법이 타 방법에 비해 간편하고 비용도 저렴해서 전망이 매우 밝다. 전기 화학적 측정을 위해서는 전극의 표면 처리 공정과 전극 표면에서의 DNA immobilization, hybridization 공정 및 전기적 신호를 발생시키는 intercalator, 그리고 전기적 신호 검출을 위한 측정 장비가 필요하다. 본 논문에서는 전극의 표면 처리 물질로서 2-mercaptoethanol을 사용했고 double strand DNA의 intercalator로써 methylene blue를 사용했으며, methylene blue의 환원 전류값을 측정하여 double strand DNA를 bare Au 또는 single strand DNA와 구분할 수 있었다. 이러한 연구 결과를 토대로 하여 전기 화학적 신호 검출을 이용한 DNA 센서의 가능성과 개발 방향을 제시하고자 한다.

• Microbiology and Biotechnology Letters
• /
• v.46 no.3
• /
• pp.181-193
• /
• 2018

Nitrous oxide ($N_2O$) is a potent greenhouse gas as well as an ozone-depleting substance. $N_2O$ is emitted during the biological nitrogen removal process in wastewater treatment systems (WTSs), and has significant environmental impacts. In this study, $N_2O$ emission in WTSs was comprehensively reviewed to better understand the effects of key parameters on $N_2O$ emission and obtain useful guidelines for $N_2O$ mitigation strategies in WTSs. Three biological pathways leading to $N_2O$ emission are hydroxylamine oxidation, nitrifier denitrification, and heterotrohic denitrification. Measurements at lab-, pilot- and full-scale WTSs have shown large variations in $N_2O$ emission (0-95% of N-loaded) during wastewater treatment. In the full-scale WTSs (0-14.6% $N_2O$ of N-loaded), the average and median values were 1.95% and 0.2% of N-loaded, respectively. Dissolved oxygen, nitrite concentrations, and chemical oxygen demand (COD)/N ratio are the most important parameters leading to $N_2O$ emission. A variety of operational strategies have been suggested to minimize $N_2O$ emission from WTSs. A new $N_2O$ mitigation strategy involving the introduction of microorganisms with high $N_2O$ reductase activity or oxygenic denitrification ability has been proposed as an alternative canonical denitrification.