• Membrane Journal
• /
• v.19 no.4
• /
• pp.317-323
• /
• 2009

In this study the nanofiltration (NF) membrane treatment of a nitric acid waste solutions containing $Pb^{+2}$ heavy metal ion discharging from the etching processes of an electronics and semiconductors industry has been studied for the purpose of recycling of nitric acid etching solutions. Three kinds of NF membranes (General Electric Co. Duraslick NF-4040 membrane, Dow Co. Filmtec LP-4040 membrane and Koch Co. SelRO MPS-34 4040 membrane) were tested for their separation efficiency (total rejection) of $Pb^{+2}$ ion and membrane stability in nitric acid solution. NF experiments were carried out with a dead-end membrane filtration laboratory system. The membrane permeate flux was increased with the increasing storage time in nitric acid solution and lowering pH of acid solution because of the enhancing of NF membrane damage by nitric acid. The membrane stability in nitric acid solution was more superior in the order of Filmtec LP-4040 < Duraslick NF-4040 < SelRO MPS-34 4040 membrane. The total rejection of Pb+2 ion was decreased with the increasing storage time in nitric acid solution and lowering the pH of acid solution. The total rejection of $Pb^{+2}$ ion after 4 months NF treatment was decreased from 95% initial value to 20% in the case of Duraslick NF-4040 membrane, from 85% initial value to 65% in the case of SelRO MPS-34 4040 membrane and from 90% initial value to 10% in the case of Filmtec LP-4040 membrane. These results showed that SelRO MPS-34 4040 NF membrane was more suitable for the treatment of an acidic etching waste solutions containing heavy metal ions.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.778-783
• /
• 2000

Effects of the $Al_2$O$_3$surface protective layer, deposited on the SnO$_2$sensing layer by aerosol flame deposition (AFD) method, on the sensing properties of SnO$_2$thin film ags sensors were investigated.Effects of Pt doping to the $Al_2$O$_3$surface protective layer on the selectivity of CH$_4$ gas were also investigated. 0.3$\mu\textrm{m}$ thick SnO$_2$thin sensing layers on Pt electrodes were prepared by R.F. magnetron sputtering with R.F. power of 50 W, at working pressure of 4mTorr, and at 20$0^{\circ}C$ for 30 min. $Al_2$O$_3$surface protective layers on SnO$_2$layers were prepared by AFD using a diluted aluminum nitrade (Al(NO$_3$).9$H_2O$) solution. The sensitivity of CO gas in the SnO$_2$gas sensor with an $Al_2$O$_3$surface protective layer was significantly decreased. But that of CH$_4$gas remained almost same with pure SnO$_2$gas sensor. This result shows that the selectivity of CH$_4$gas is increased because of the $Al_2$O$_3$surface protective layer. In the case of SnO$_2$gas sensors with Pt-doped $Al_2$O$_3$surface protective layers, low sensing property to CO gas and high sensing property to CH$_4$were observed. This results in the increasing of selectivity of CH$_4$gas selectivity are discussed.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.489-496
• /
• 2000

Several culture systems including batch, two-stage CSTR, semi-fed batch, and two-stage cyclic fed-batch were investigated for the efficient production of the Fab fraction of PDC-E2 specific human monoclonal antibody using high cell density recombinant E. coli. A two-phase batch system and a two-stage continuous system were examined to overcome plasmid instability problems, by separating the growth and the production stages. The cell density and productivity of the two-stage continuous culture was better than that of the two-phase batch fermentation. In the two-stage continuous culture system with DO-stat, the cell growth and the productivity were superior to those of the system without the DO control. Also, almost total plasmid stability was maintained in the two-stage continuous culture system. Modified M9 medium was selected as an optimum feeding medium for the fed-batch process, and the optimum C/N ratio determined to be 2:3. The optimum feeding rate was $0.6g/\ell/hr$ for a constant feeding strategy in semi-fed batch system. When the feeding medium was fed by pulsing, it was observed that more frequent pulsing resulted in improved cell growth. The linear feeding method was the most efficient of the various feeding methods tested. Finally, high cell density culture using a two-stage cyclic fed batch system with pH-stat was tried because the linear feeding method showed limitations in terms of obtaining high cell densities, and a cell density of $54 g/\ell$ was achieved. It was concluded that the two-stage cyclic fed batch system was the most efficient system for high cell density culture of the systems tested. However, productivity improvements were lower than expected due to the extremely high accumulations of acetate, although the low levels of residual glucose were maintained.

• Journal of Environmental Science International
• /
• v.3 no.2
• /
• pp.101-109
• /
• 1994

Chlorinated water in swimming pools contains chloroform at elevated levels compared to chlorinated drinking water Chloroform levels in four indoor swimming pools(swimming pools A, B and C in a city of Korea and swimming pool D in a city of New Jersey in the United States) were examined. The chloroform levels in the water of swimming pool C (city-managed) weve shown to be significantly(p=0.0001) different from those of private swimming pools A and B: the mean chloroform levels in the pools A, B, and C are 22.8, 17.8, and 31.1 $\mu\textrm{g}$/l, respectively. Furthermore, all of these chloroform levels are significantly(P=0.0001) different from those of New Jersey: chloroform concentration of the Korean pools ranged from 10.9 $\mu\textrm{g}$.l to 47.9 $\mu\textrm{g}$/l with a mean of 23.2 $\mu\textrm{g}$/l, while it ranged from 27 $\mu\textrm{g}$/l to 96$\mu\textrm{g}$/l with a mean of 64.4 $\mu\textrm{g}$/l in the New Jersey pool. The disinfection processes would cause part of this difference since the swimming pools in Korea applied both chlorination and ozonation method, while the swimming pool in New Jersey used chlorination method only. It was implied that swimming parameters inconsistently vary, resulting in fluctuation of and no constant accumulation of chloroform in the water with the change of time for the day. A regression analysis showed no relationships between sampling time and chloroform concentrations for the sampling day in the swimming pools of Korea. A F-test indicated no significant difference of chloroform concentrations in the morning and afternoon samples collected in the swimming pools. Ingestion dose was estimated to be 0.58$\mu\textrm{g}$ from an hour swimming in a city of Korea, taking into accounting an average of 23.2 $\mu\textrm{g}$/l in swimming pools in the city In extreme situation, the ingestion dose was estimated to be 12.0 $\mu\textrm{g}$ from an hour swimming in a city of Korea.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.3
• /
• pp.124-131
• /
• 2006

For commercialization of molten carbonate fuel cell (MCFC), it has some problems to be overcome such as decrease of porosity and thickness of the anode under the operating condition (at $650^{\circ}C$ and working pressure of more than 2 $kg_f/cm^2$). Recently, Ni-Al alloy anode has been proposed to replace the conventional Ni-Cr anode as an alternative material to resist a creep and inhibit the sintering. The objective of this research is to sinter the green sheet of Ni-Al alloy anode during single cell pre-treatment process, which has several advantages like cost down and simplification of manufacturing process. However, the Ni-Al alloy anode prepared with a conventional pre-treatment process showed the phase separation of Ni-Al alloy and formation of micropore(${\leqq}0.4{\mu}m$), resulting in low creep resistance and high electrolyte re-distribution. In order to prevent the Ni-Al alloy anode from phase-separating, nitrogen gas was used in the process of pre-treatment. Introducing the nitrogen, the phase separation from Ni-Al alloy into nickel and alumina was minimized and increased creep resistance. However, there was some micropore formation on the surface of Ni-Al alloy anode during the cell operation due to creation of lithium aluminate. Addition of more amount of electrolyte into a cell, especially at cathode, made the cell performance stable for 2,000 hrs. Consequently, it was possible to make the Ni-Al alloy anode with good creep resistance by the modified in-situ sintering technique.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.34-44
• /
• 2018

In the Ancient Mesopotamia, Egypt, Judas, Greece, and Rome, Phoenix dactylifera was planted in gardens or orchards to signify life, blessing, and victory. Branches of Phoenix dactylifera, likened to high and precious, were referred to one of the gifts to the king in the second century BC and have been used in the Feast of Tabernacles. And they were engraved on the walls of the temple and along with cherub. Besides, Phoenix dactylifera is compared with a righteous person in the Bible since it grows straight despite strong winds. And, it was used as a symbol of honesty, justice, and right. Churches call the week before Easter Palm Sunday since the crowd laid the leaves of date palm trees on the road and shouted "Hosanna" while waving the date palm branches when Jesus entered Jerusalem. Moreover, pilgrim in the Middle Ages was called 'Palmer' in English due to custom of returning with the leaves and branches of date palm trees as a memorial of the Holy Land pilgrimage. This study analyzes naming issue of Phoenix dactylifera through the old literature and 27 versions of the most influential Bibles in History of Bible Translation in Korea, China, and Japan. Phoenix dactylifera is translated into Chinese as '棕櫚(Trachycarpus fortunei)', a native tree of China. 棕櫚 is similar to Phoenix dactylifera, but its fruit and leaf are quite distinct. This being so, translating Phoenix dactylifera as 棕櫚 has a limit to convey symbolic meaning adequately. In the Japanese Bible, on the other hand, Phoenix dactylifera is translated as 'なつめやし(Natsumeyashi)' meant date palm tree. Most of Protestant Bible in Korea use 'Jongryeo' like Chinese Bible while translation in Korean Catholic Bible(2005) varies from one scripture to another: 'Yaja Namu (Palm Tree)' - 38 times, 'Jongryeo Namu' - 5 times, and 'Daechu Yaja Namu (Date Palm Tree)' - 3 times. Date Palm Tree, 'Jongryeo Tree', and Palm Tree don't grow in Korea. However, they had long been recognized as Haejo(海棗), Jongryeo(?櫚), and Yaja(椰子) respectively through China and Japan. Each of them called by a distinct name correspond with its own characteristic and used separately in Korean Classics as Jongryeo and Haejo were identified in ancient Chinese literatures. It seems that more confusion was raised since 'Palm' was translated as 'Jongryeo' in several books including "?藤和英大辭典 (1915)", "Modern 朝鮮外來語辭典(1938)", and "Latin-Korean Dictionary(1995)". However, the Latin term 'Palmae' is translated into English as either palm tree or date palm. The results of this study suggest that more accurate translation of Phoenix dactylifera in the Bible would be 'Daechu Yaja Namu (Date Palm Tree)' and using different name fit for its own characteristic would be more appropriate.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.55-61
• /
• 2020

Selective catalytic reduction (SCR) has been a promising technology to reduce the air pollution caused by nitrogen oxides (NOx) in several industries. The consumption of SCR catalysts increases every year as technology evolves, however those have a limited lifespan and usually end up in landfills after they deactivate. Currently, the most widely used catalyst for and stationary applications is V₂O₅-WO₃/TiO₂ which can contain around 50% wt V₂O₅ and 7-10% wt of WO₃. The vast uses for both vanadium and tungsten and the worldwide interest in recycling methods that allow for the extraction of metals from secondary sources represent the major motivation for this research. The extraction time, pH dependency, extraction concentration studies were carried out using Aliquat 336 in exxol D80 as the extractant. It was determined that to optimize the extraction of both metals 30min of contact time with an organic phase containing 0.5mol/L of Aliquat 336 are needed at a slightly acidic pH (~5.0). In addition, counter McCabe-Thiele studies allowed us to determine that one stage is necessary for the removal of 99% of vanadium while 2 stages are necessary for the extraction of tungsten and counter current simulations proved that the theoretical approach was correct.

• Applied Microscopy
• /
• v.37 no.1
• /
• pp.11-21
• /
• 2007

Saengshik which is food not to apply heat is expected to have good effect on the body because metabolic enzymes are preserved in it. In fact, despite of enlargement of saengshik market, the researches on the effect of saengshik are insufficient. So, the aim of this study was to investigate the protective effect of saengshik against $CCl_4-inducing$ hepatotoxicity in ICR mice. As the result of serum biochemical parameters, AST (SGOT) and ALT (SGPT) were significantly decreased at the experimental group treated with saengshik and $CCl_4$ as compared with experimental group 1 treated with $CCl_4$ only (p<0.01). ALP was significantly higher at experimental group 2 compared with control and experimental group 1 (p<0.01). In histological study, experimental group 1 treated with $CCl_4$ only showed severe necrosis all over the liver at the gross observation, and showed severe perivenular necrosis and individual hepatocytic degeneration. However experimental group 2 was not nearly different from control group in appearance and showed mild perivenular necrosis and dominant sever neutrophil infiltration surrounding central veins. The result of this study showed the protective effect against $CCl_4-inducing$ hepatotoxicity and suggest the possibility of the functional health food. However, further studies about the effect of saengshik may be needed.

• Journal of the Korean Geographical Society
• /
• v.29 no.2
• /
• pp.137-165
• /
• 1994

Structural adjustment of industry (or industrial restructuring) seems to be inherent in the process of capitalist economic development, which tends to be proceeded with shifts from one stage to another in order to overcome structural crises generated in each stage. The structural adjustment of industry is necessarily accompanied with regional restructuring, since it is not only projected on spece, but also mediated by space. Such a restructuring necessitates industrial and uneven regional devlopment through which capital can seek excessive profits over the rate of socio-spatial average. The industrial restructuring and uneven regional development in the 1980s in Korea can be seen as a process in which capital attempted with a strong support of the govenment to overcome the crises in the end of 1970s and hence to go on rapid economic growth. In this process, capital, especially monopoly capital concentrated into few conglomerates, pursued both extensive expansion and intensive development of industry simultaneously. In results, the Korean economy could eliminate some of peripheral characters and maturate the Fordist accumulation system. The extensive expansion of the Korean industry in the 1980s was stimulated mainly through the enlargement and adjustment of investment for equipment facilities which was planned to exclude or rationalize traditional light industries on some places, and to continue rapid growth of key heavy-chemical industries, especially of fabricated metal industry, on other places. In this process, keeping mainly the existing developmental axis which polarized the Seoul Metroplitan region and the Southeast region in Korea, the enhancing spatial mobiiity of capital and the further differentiating division of labour enforced a tendency of concentration of all types of industry in the Seoul Metropolitan region, and at the same time provoked the diffusion of some industries over Jeolla and Chungchong regions in a considerable extent. The intensive development of industriai structure in the 1980s was pursued through the strategic encouragement of subcontracting small firms mainly which produced assembling components, the technical enhancement and factory (semi-) automation, and the enrichment of service industries for estate management, finance, distribution and retailing which supported and complemented the production of goods. In this process, enabling capital to extend and elaborate its domination over space through the reorganization of regulating systems, the Fordist division of labour generated a socio-spatial hierarchy in the nation-wide scale that characterized: the Seoul Metropolitan region as an overmaturated (or overarching) Fordist region performing the conceptive functions of management, research and development, in which all types of industry (including service industries) tended to be reconcentrated; Kyungsang region as a maturated Fordist region with excutive branches of large conglomerates and with subcontracting firms around them which produced standardized products through the automized production processes in secialized Fordist industries or rationalized traditional industries; and Jeolla and Chungchong regions as newly devloping Fordist regions with newly migrated branches and some subcontracting small firms-in relatively older Fordist industries or partly rationalized traditional industries. From these analyses, it can be argued that the structural adjustment of the Korean industry in the 1980s, which had carried out both through the extensive expansion and the intensive deveiopment, strengthened further uneven regional development process, even though it appears to have reduced apparently the economic and regional disparity by balancing numerically large and small firms and by extending the Fordist industrial space nation-wideiy. And it seems more persuasive to see that the Korean industrial structure in the 1980s maturated the Fordist system of accumulation, but not yet transformed towards the post-Fordist (or the so-called flexible) accumulation system, even though the Korean economy in the 1990s seems to be under a pressure of restructuring towards the latter system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1475-1485
• /
• 2012

This study was conducted in order to understand nutrition teachers (dietitians)' perceptions of barriers to implementation of HACCP system in school foodservices in Gyeongnam, Korea. Questionnaires were distributed to 350 nutrition teachers (dietitians) from November to December of 2009, and 214 were collected and analyzed. The results of this study were as follows. First, nutrition teachers (dietitians) recognized the following as barriers in implementing the HACCP system: 'the status of facilities and utilities'> 'monitoring'> 'work satisfaction'> 'foodservice employees'> 'cooperation of HACCP team'> 'cooperation of persons concerned besides foodservice employees'> 'understanding the HACCP system'. Second, total working experience was found to be the factor most affecting 'cooperation of HACCP team (p<0.01)', 'cooperation of persons concerned besides foodservice employees (p<0.01)', 'foodservice employees (p<0.05)', and 'work satisfaction (p<0.05)'. Further, 'the status of facilities and utilities' was significantly affected by 'construction/reconstruction of kitchen (p<0.01)', 'division of kitchen area (p<0.01)', 'existence of preliminary preparation room (p<0.01)', and 'existence of dishwashing room (p<0.01)'. Third, dietitians perceived the following concerning hindrance factors of the HACCP system according to CCP stage: 'CCP 1'> 'CCP 3'> 'CCP 2, 'CCP 6'> 'CCP 4'> 'CCP 8'> 'CCP 7'> 'CCP 5'. In conclusion, this study showed that nutrition teachers (dietitians) in the Gyeongnam area recognized 'the status of facilities and utilities' from HACCP areas and 'CCP 1 (menu planning)' from CCP stages as the greatest barriers to implementing the HACCP system in school foodservices. To implement the HACCP system successfully in school foodservices, facilities and utilities should be properly equipped, and menu planning training for nutrition teachers (dietitian) should be conducted.