• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.194-200
• /
• 1993

Grinding experiments for Al 7075 alloy were carried out to study the influence of grinding conditions and supply methods of grinding fluid on residual stress and surface roughness and grinding force. The residual stress was measured by an X-ray method. The supply method of grinding fluid with a guide nozzle has large decrease value of the tensile residual stress and of grinding force than a normal nozzle. In sparking out state of the grinding work, it is desirable to decrease the depth of cut and the workpiece feedrate for improving surface roughness and mechanical properties.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.61-68
• /
• 1998

The form accuracy of parts has become an important parameter. Therefore, dimensional tolerance and geometric tolerance are used in the design stage to satisfy required quality and functions of parts. But the informations on the machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them. The results are as follows, The effects of work speed and depth of cut on workpiece shape are negligible compared with the effect of traverse speed. There is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increased.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.1-7
• /
• 2004

Abrasive water-jet(AWJ) machining can cut various materials such as metal, glass and plastics. However, the AWJ machining has some troubles including kerf, rounding and side taper. In this study, we experimently investigated the correlation between the traverse speed of the abrasive water-jet and the dimensional error of the workpiece according to the thickness and the types of the material. The specimen was the stainless steel and the mild steel and the predetermined contour cutting was conducted. A comer radius error, an uncut width and a kerf were measured and evaluated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.103-107
• /
• 1994

본 연구에서는 원통 프런지 연삭에서 비가공시간을 줄이기 위해, 공연삭시간 단축과 드레싱 신호를 이용한 숫돌 손상상태 검출에 관한 연구를 수행하였다. 연삭기의 심압대에 설치한 AE센터와 숫돌 덮개에 설치한 초음파센서를 이용해 공연삭, 공작물과 숫돌의 근접, 접촉상태를 감시하고 이에 대응해 적절히 이송속도를 제어했다. 그리고 드리싱시 나타나는 AE 신호의 표준편차를 이용해 숫돌의 손상상태를 검출해서, 드레싱 기회에 대한 효과적인 정보를 제공합으로써 비가공 시간을 단축했다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.611-617
• /
• 1989

A jet cutting system is a new concept of cutting device wihch requires high pressure up to thousands of atmospheric pressure. The use of water as a cutting medium brings in many of working advantages such as no dust, no gas, and no thermal distortion. And an introduction of abrasives into the water jet flow increases signigicantly cutting abilities and improves cutting performance. Cutting with abrasive water jet involves many operating variables, including design of the cutting system. For efficient cutting, the operating parameters have to chosen properly. In spite of several attempts to develop the cutting model theoretically, all of the optimization of the operating parameters is based upon exerimental results of each jet cutting system. In this paper, the effect of the parameters was measured and analysed in terms of pressure, abrasive, and transverse rate of a workpiece. Most of all, sufficient feeding of abrasives is the most important factor for efficient cutting performance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.468-484
• /
• 1992

본 연구에서는 기존의 유연 볼 엔드밀의 절삭력 모델을 바탕으로 자유 곡면의 정삭 가공에서 발생할 수 있는 과대 또는 과소 절삭을 방지하면서 그 가공의 효율성을 높이기 위한 볼 엔드밀의 이송 속도 결정법을 제시하고자 한다. 먼저, 자유 곡면의 가공에서 발생될 수 있는 공구의 처짐에 따른 가공오차에 대하여 볼 엔드밀 공구의 처 짐벡터와 공작물의 공구 접촉점에서의 법선벡터로 표현되는 가공오차(machining error ) 예측 모델식을 유도하였다. 본 가공오차 예측 모델식은 다시 절삭날당 가지는 이 송량의 함수로 전개되어 그 곡면의 주어진 가공 공차(machining tolerance)를 만족시 키는 이송속도를 결정하게 된다.

• 기계와재료
• /
• v.24 no.2
• /
• pp.96-109
• /
• 2012

채터진동은 공작기계에서 가공중에 소재와 공구사이에 나타나는 급격한 상대진동을 말한다. 이러한 진동은 가공 소재 품질에 심각한 영향을 미치는 요소일 뿐만 아니라 가공툴과 기계에 손상을 유발시키는 인자이기도 하다. 본 연구는 공작기계의 구동 중 발생되는 채터진동을 실시간으로 감지하여 공구의 회전속도와 이송 속도를 제어하여 자율보정함으로써 보다 빨리 채터진동의 영향을 보상함을 물론 보다 정밀한 가공물을 생산할 수 있는 채터진동 감지 및 보정에 관한 것이다. 실시간 처리를 위하여 본 연구에서의 공작기계의 채터진동 보상장치는 공작기계에 임베디드 형태의 디바이스로 개발되었으며, 구성은 공작기계의 채터진동을 감지하는 센서와 센서로부터 감지된 채터진동에 따라 보상값을 예측하여 산출하는 채터보상기를 포함하여 공작기계의 CNC제어기의 연계 구성됨을 특징으로 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.206-214
• /
• 1988

To improve the surface waviness in the peripheral milling, the feedrate is controlled so that the cutting force measured in the normal direction to the workpiece is constant. A discrete time first order model between the feedrate and the tool deflection is derived for the control. It has been shown by the analysis that the tool deflection is directly related to the feedrate and largely affects the surface waviness during cutting. The experimental results shown that the surface waviness is drastically improved by the proposed methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.984-987
• /
• 2002

Abrasive water-jet(AWJ) machining is a new cutting technology. The AWJ can cut various materials such as metal, glass and stone. However, the AWJ machining makes troubles including kerf, rounding and side taper. In this study, we investigated the correlation between parameters of abrasive water-jet machining and cutting characteristics. The machining parameters were the material thickness and the traverse speed. The experiment was conducted to cut the stainless steel(STS41) and the mild steel(SS41) specimens. The results of the experiment were presented as the relation between cutting conditions and troubles of a dimension error, a conner error, an uncut width and a kerf.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1105-1108
• /
• 2001

In these days, according s the increase of technological development the part demension goes up for ultra-precision. It is grinding behavior that is important processing which directly influences by machining accuracy at product quality with the net shape manufacturing. In this study, by using CBN wheel an analysis carried out for workpiece's profiles and its characteristics by measuring grinding force and surface roughness. Workpiece materials were used STD11, SUS304 and STB2 varing condition of feedrate and depth of cut.