• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.334-342
• /
• 2016

Conventional eco-design has been implemented based only on the environmental aspects of a product. Key components of a product identified from the analysis of the environmental aspects have been the target for improvement in the conventional eco-design. The use of eco-design index (EDI) considering both the environmental and economic aspects, and utility value (UV) of a product can be envisaged as an alternative way of implementing and assessing the eco-design. The objective of this study was to propose the logic of the EDI and apply it to the components for performing printing function of the multi-function printer. The EDI was formulated by quantifying the UV, life cycle environmental impact (LCE) and life cycle cost (LCC) of the components of a product, here components of the printer. Of the eight components investigated, roller was identified as the best performing consumable in both the environmental and economic aspects. However, its UV was the lowest among the eight. The EDI of the roller was mere $4^{th}$ in ranking out of the eight. Transfer belt ranked $8^{th}$ and $5^{th}$ in the environmental and economic aspects, respectively, while $2^{nd}$ in the utility value with its EDI ranked $3^{rd}$. This indicates that not only the environmental aspects but also economic and utility value aspects should be considered when identifying the key components for improvement in the eco-design.

• 기계와재료
• /
• v.25 no.3
• /
• pp.130-136
• /
• 2013

철도차량용 제동장치 성능시험기는 제륜자의 마찰계수, 마모량, 열반점 등의 물리적 성질을 실차와 유사한 환경조건에서 시험을 수행함으로써 제륜자의 연구개발 및 성능평가의 목적으로 활용한다. 제륜자는 차량의 운동에너지를 열에너지로 변환한다. 성능시험기는 철도차량의 주행 운동에너지에 해당하는 관성질량으로부터 회전 운동에너지에 해당하는 관성모멘트를 조성하여야 한다. 공용 시험기에서 각종 철도차량에 대한 관성모멘트를 기계적 관성모멘트인 플라이휠로 모의하기에는 용량도 크고 구조가 복합하여 현실적으로 한계가 있다. 본 연구에서는 기계적 관성모멘트의 한계를 극복하고자 전기적 관성모멘트를 부가적으로 활용하는 기법을 제시하고 이를 적용한 시험기를 소개하고자 한다. 이러한 연구는 시험기의 외형적인 크기를 줄이고 또한 각종 철도차량에서 요구하는 정량적인 관성질량의 모의가 가능하리라고 사료된다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.3
• /
• pp.231-238
• /
• 2021

In addition to individual calls and group calls, the Trunked Radio System (TRS), which belongs to a group, can make calls simultaneously, and many users can use it within a limited time by adjusting the call time. Also, the LCX infrastructure network of the subway Most of the FM, firefighting radio, TRS of the National Police Agency and the terrestrial DMB service built in 2005 are commonly connected to the network for service and operation. In connection with the analysis, call reception sensitivity, handoff, interference with other signals, time delay, etc. were analyzed, and tests such as reception field strength for each output of the repeater and the success rate of the call terminal were conducted and the test results were analyzed. In addition, it will help TRS cell design and network construction by predicting equipment output capacity and service coverage based on test results.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.293
• /
• pp.16-19
• /
• 2001

유리알 같은 푸른 바다의 잔물결 아래로 형형색색의 물고기가 떼지어 다니고 산호초가 금방 잡힐 것 같이 아름다운 필리핀 루손섬 남부의 바탄가스 해안을 따라 코코넛과 바나나 나무가 울창한 비포장 해안도로를 1시간 이상 달려가면 필리핀 근세기에 길이 남을 만한 역사의 현장이 나타난다. 그 역사의 주인공인 일리한 프로젝트에 대해 소개한다. 필리핀은 7,109개의 섬으로 이루어진 섬나라이며 국토는 한반도의 약 1.3 배인 30만$km^2$, 인구는 약 7500만명(2000년 5월 기준)이며 말레이계와 중국계, 스페인 혼혈계가 대부분이다. 언어는 타갈로그어와 영어를 공용으로 사용하고 있으며 아열대성 기후에 연평균 기온은 약 27$^{\circ}C$인 무더운 나라이다. 필리핀의 전력사정은 1999년말 기준 전력설비 용량이 12,686MW로 우리 나라 전력설비 용량의 약 28$\%$에 해당하며 전력수요는 지속적으로 증가하는 추세에 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1947-1954
• /
• 2009

Camera-captured car plate images contain much variation and noise and the character images in a plate are typically very small. We attempted to improve the plate identification efficiency suitable for this undesirable condition. We experimented various image preprocessing and feature extracting methods and the very effective features that can compensate one feature's limitation is determined through extensive experiments. Finally two very effective features that can complement the limitations of each other feature(classifier) are determined and the efficiency is proved by recognition experiments. This approach is very necessary when handling plate character images which are typically small, various, and noisy. Individual classification result, confidence factor, region name relation and feedback verification are comprehensively considered to enhance the overall recognition efficiency. The efficiency of our method is verified by a recognition experiment using real car plate images taken from traffic roads.