• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1998.09a
• /
• pp.84-87
• /
• 1998

본 연구에서는 음향학에서 음파를 제어하는데 주로 이용되는 헤름홀츠 공명장치의 원리를 방파제에 응용하였다. 외해에서 발생된 입사파는 Fig.1에 보여진 입구를 가진 공명 구조물(Resonant Structure)을 만나면 에너지 일부는 입구를 통하여 방사(Radiate)되며 또 일부 에너지는 입구를 통하여 공명 구조물 안으로 방사된다. 공명 구조물 안으로 들어온 파의 주파수와 공명 구조물의 고유 주파수(Natural Frequency)들 중 첫 번째 공진 모드(Resonance Mode)의 주파수가 일치되면 구조물 내부에서의 파는 크게 증폭된다. (중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.355-358
• /
• 2006

A linear acoustic analysis is conducted to examine bituning of acoustic resonators for acoustic damping in a combustion chamber of liquid rocket engine. Bituned resonators are tuned to the two principal modes, the first tangential(1T) and the first radial(1R) modes. First, the acoustic-damping effect of monotuned resonators is investigated. The damping capacity is quantified by damping factor as a function of the number of the resonators monotuned to 1T or 1R mode. Next, the damping characteristics of the bituned resonators are investigated. From the numerical data, the number of resonators, to be tuned to 1T and 1R modes, respectively, can be selected properly.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.281-284
• /
• 2009

Acoustic tuning frequency of quarter-wave resonators is investigated numerically to suppress combustion instability in a liquid rocket engine. A quarter-wave resonator is adopted, which was designed from the cold acoustic test for optimal damping condition. First, in a model combustion chamber scaled down from a full-scale chamber, reactive flow filed is analyzed numerically and acoustic-pressure responses are examined. Next, thermodynamic properties in the resonators are predicted. Based on the data, frequency tuning method is studied. The optimum tuning length of each resonator is proposed and thereby, sufficient damping is produced.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.407-410
• /
• 2002

본 논문은 스피커의 후면 방사음을 이용하여 저주파수의 음을 재생하기 위한 인클로져(enclosure) 방식 중 통기구(Vent)를 이용한 위상반전(Bass Reflex) 방식의 스피커 시스템에 관한 것이다. 일반적으로 위상반전형 스피커 시스템의 임피던스 곡선의 특성은 저주파수 대역에서 통기구의 공명에 대한 것과 구동스피커의 공명에 대한 임피던스 봉(mound)이 나타난다. 기존의 연구 결과들은 통기구와 인플로져의 용적에 관련된 최저 주파수에서의 공명에 대한 것만을 대상으로 하였다. 즉, 최저 주파수에서의 공명특성이 상대적으로 높은 주파수에서 나타나는 스피커의 공명특성에 미치는 영향과 이로 인한 스피커의 음파발생 특성에 관하여 구체적인 논의가 되지 않았다. 본 논문에서는 위상반전형 스피커 시스템에서의 두 임피던스 봉오리 사이의 관계를 정리하고, 상대적으로 높은 주파수에서 발생되는 임피던스의 공명 특성에 따른 스피커의 음파발생 특성에 관해 연구하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2006

A linear acoustic analysis is conducted to examine bituning of acoustic resonators for acoustic damping in a combustion chamber of liquid rocket engine. Bituned resonators are tuned to the two principal modes, the first tangential(1T) and the first radial(1R) modes. First, the acoustic-damping effect of monotuned resonators is investigated. The damping capacity is quantified by damping factor as a function of the number of the resonators monotuned to 1T or 1R mode. Next, the damping characteristics of the bituned resonators are investigated. From the numerical data, the number of resonators, to be tuned to 1T and 1R modes, respectively, can be selected properly. Furthermore, the concept of resonator bituning is applied to reduce the degradation of damping effect caused by the mode split and thereby, optimal bituning frequencies are found.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.459-468
• /
• 2014

An additional relationship equation is numerically obtained to increase the accuracy of the conventional equation for obtaining the resonant frequency of a resonator. Although the conventional equation is widely used in industry because of its simplicity, it does not provide enough information on the cavity or the neck of the resonator for noise reduction in a duct. Resonator designers have difficulty implementing resonator design owing to the uncertainty in geometry presented by the well-known formula for determining the resonant frequency. To overcome this problem, this work determines an approximate equation using results of numerical calculation. To this end, shape parameters of the neck and cavity of a resonator are defined, and an equation describing the relationship between them is derived by adjusting the peak frequency in the transmission loss curve of a resonator to its resonant frequency. The application and validity of the derived equation are investigated in a numerical simulation and an acoustic experiment, respectively.

• The Journal of Engineering Geology
• /
• v.31 no.2
• /
• pp.211-222
• /
• 2021

The magnitude 5.4 earthquake occurred in 2017 near 7.5 km north of Buk-gu, Pohang. In order to find out the characteristics of microtremor in Buk-gu, Pohang, Gyeongsangbuk-do, where earthquake damage occurred significantly, a total of 39 points were acquired to analyze the horizontal to vertical spectral ratio (HVSR). Microtremor vary from region to region, so the resonant frequency of the region is obtained by examining the microtremor. For Thickness analysis, we analyze the structure and properties of shear wave velocity (Vs) up to the underlying rock to compare resonance frequencies to match the horizontal to vertical spectral ratio (HVSR) analysis technique against nearby boring data. Using F₀ = V_s/4H with a resonance frequency of alluvium is 1.3 ± 0.07 Hz and a resonance frequency of Yeonil group is 0.69 ± 0.22 Hz, the alluvium thickness was found to be 26~30 m and the Yeonil group thickness was 170~250 m.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.201-204
• /
• 2007

다양한 공연장 및 대공간에서의 실내음향 제어를 위해서는 실내마감재료의 흡음 및 확산성능을 제어할 수 있는 재료가 필요하다. 본 연구에서는 이를 위해 알루미늄 새시를 이용한 흡음구조를 개발하였으며, 흡음특성을 조사하기 위하여 수직입사 흡음계수와 잔향실법 흡음계수를 측정하였다. 수직입사 흡음계수 측정결과 알루미늄 다목적 흡음재의 타공구조와 인서트에 의해 형성되는 공간이 공명형 흡음기의 역할을 하여 중.저주파수 대역의 흡음계수가 증가되는 것으로 나타났다. 잔향실법 흡음계수 측정결과 알루미늄 새시를 이용한 흡음구조의 형성에 따라 공명주파수 대역보다 낮은 중저주파수 대역의 흡음계수가 증가되는 것으로 나타났다. 공기층 증가에 따라 공명주파수 이상 대역에서의 흡음률은 증가되고 주파수 대역별 흡음계수 편차도 감소되는 것으로 나타났으며, 고주파수 대역의 흡음률 향상을 위한 방안이 필요한 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.16-21
• /
• 2001

Improvement of sound absorption capability of wood and wood-based board by resonant absorption was attempted. Sound absorption coefficients of wood and wood-based board which contain normal, simple perforation and stair type perforation had been estimated by the tube method using standing wave ratio. Sound absorption coefficients of wood specimens of simply perforated and perforated with stair were higher than that of normal specimens. Especially, in case of stair type perforation, it was about 50 to 60% higher than that of normal specimen in the frequency of 3 to 4KHz. It was considered that the cavity which had been formed by perforation with stair type behaved as a single resonator. Wood-based board showed good sound absorption coefficients in the frequency from 125Hz to 2KHz and that of perforated board showed a little higher in the frequency from 300Hz to 500Hz than that of normal board. The computed data of resonant frequencies at several sizes of cavity showed good accordance with the estimated data of those.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.48-48
• /
• 2004

RUS(공명초음파분광법)는 비파괴 검사법의 하나로서 공명 주파수와 주파수 응답을 매우 정확하게 측정할 수 있으며, 탄성학적인 성질과 이방성을 결정하는데 이용 가능하다. Paul Heyliger와 Hassel Ledbetter는 steel block의 표면 크랙과 복합적층물의 내부 손상을 검출하는데 RUS를 사용하였으며, Jay G. Saxton은 RUS를 이용하여 chops, cracks, voids등을 검출하므로써 RUS의 비파괴 검사기능으로서의 가능성을 찾았다. 현재 광섬유 응용 제품에 많이 이용되고 있는 광커넥터는 초정밀 가공을 필요로 하는 중요한 부품으로서 optical fiber, ball lense로 구성되어진다.(중략)