• Journal of computational fluids engineering
• /
• 제19권1호
• /
• pp.21-26
• /
• 2014

Butterfly valve is a valve that controls fluid flow depending on the size of the opening angle. In general, the size of the opening angle of the valve increases, the fluid flow has also increased sharply. However, sometimes, in a specific piping system, a particular operating condition is needed that the fluctuation of the fluid flow should not have large amount although the size of opening angle of the valve become larger. In butterfly value, the shape of a typical thin plate, it is impossible to control a minute fluid, but in thick plate type, it is possible. In this study, we got the fluid flow control characteristics and pressure drop through both a numerical method and an experimental method about thick plate type. The numerical result and experimental result of flow coefficient show a similar pattern. In addition, we could find that minute fluid flow control was possible in the area of small size of the opening angle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제39권11호
• /
• pp.1123-1129
• /
• 2015

A pair of two-way valves typically is used in automotive washing machines, where the water flow direction is frequently reversed and highly pressurized clean water is sprayed to remove the oil and dirt remaining on machined engine and transmission blocks. Although this valve system has been widely used because of its competitive price, its application is sometimes restricted by surging effects, such as pressure ripples occurring in rapid changes in water flow caused by inaccurate valve control. As an alternative, one three-way reversing valve can replace the valve system because it provides rapid and accurate changes to the water flow direction without any precise control device. However, a cavitation effect occurs because of the complicated bottom plug shape of the valve. In this study, the cavitation index and percent of cavitation (POC) were introduced to numerically evaluate fluid flows via computational fluid dynamics (CFD) analysis. To reduce the cavitation effect generated by the bottom plug, the optimal shape design was carried out through a parametric study, in which a simple computer-aided engineering (CAE) model was applied to avoid time-consuming CFD analysis and difficulties in achieving convergence. The optimal shape design process using full factorial design of experiments (DOEs) and an artificial neural network meta-model yielded the optimal waist and tail length of the bottom plug with a POC value of less than 30%, which meets the requirement of no cavitation occurrence. The optimal waist length, tail length and POC value were found to 6.42 mm, 6.96 mm and 27%, respectively.

• Journal of the Economic Geographical Society of Korea
• /
• 제14권1호
• /
• pp.71-85
• /
• 2011

Many of the old industrial cities in advanced economies have experienced deindustrialization since the 1960s. While some of them have been transforming their economic structures with new economies, such as arts and cultural industries, others have been seriously suffering from economic and social problems. Brooklyn Borough of New York City is one of the best examples which have gone trough rapid de-industrialization; but have been reasonably successful in recovering its economy with arts and cultural industries. This paper introduces the process of developing creative industry clusters, articulates major actors, and find out the governance of the clusters, using three Brooklyn's arts clusters, such as DUMBO, BAM and Williamsburg. Based on the case studies, the paper draws theoretical and policy implications applicable to the Korean circumstance.

• Journal of the Korean Association of Geographic Information Studies
• /
• 제10권1호
• /
• pp.205-217
• /
• 2007

Donut phenomenon of city centers has resulted from the decreasing residential population and the fluid population with curved commercial function, but the analysis can bring other problems owing to the simplified method. And As the survey and the analysis the research can offer the characteristic methods for regeneration in the city of Busan. To figure out the functional regions of city center the research has analyzed 15 Dongs in city center of the three years of 1996, 2000 and 2004 to find out the donut phenomenon and the regeneration of city center. The survey has chosen 20 variation factors using factor analysis and cluster analysis. Major factors in each year are shown 3 factors, presenting 84.2%, 87.1% and 85.5% of the accumulated explanation rate. These factors explain residential centered, commercial centered, and management centered factor. The results are as following. First, it is necessary to plan the regeneration of the total city center owing to the total donut phenomenon regarding the functions. Second, the methods to regenerate city centers should be established according to the various regional characterizations.

• Applied Chemistry for Engineering
• /
• 제9권2호
• /
• pp.172-176
• /
• 1998

Epoxy adduct carboxyl terminated butadiene acrylonitrile(CTBN) was prepared by blending of CTBN and epoxy resin. CTBN/PU/epoxy was prepared from polyurethane(PU), epoxy resin, and CTBN. The CTBN/PU/epoxy using 5 wt% of CTBN content showed shifting damping peak as PU content increased. It suggested that CTBN/PU/epoxy had good compatibility for all composition at 5 wt% of CTBN content. But miscibility of CTBN/PU/epoxy decreased with the increase of the CTBN content. PU content for maximum flexural properties of CTBN/PU/epoxy was 10 wt%, but decreased with the increase of the PU content. The fracture toughness of CTBN/epoxy was improved by addition of the PU. Fracture surfaces of CTBN/PU/epoxy showed the shear deformation and generation of stress whitening which is associated with the cavitation. Cavitation in the CTBN and shear defomation in the PU modified epoxy matrix are the toughening mechanisms for CTBN/PU/epoxy.

• International Commerce and Information Review
• /
• 제17권1호
• /
• pp.241-264
• /
• 2015

This study analyzed backward and forward linkage effects among Korea, China and Japan by International Input-Output(I-O) tables. Index of dispersion power and sensitivity degrees were measured after making 'Korea, China and Japan International Input-Output(I-O) Table'. The study showed that the inter-dependency between Korea and China was increased while the influences of Japanese was decreased among the 3 countries. Under the de-industrialization, the 3 countries decreased influences over their domestic industry but increased the inter-dependency over the other countries. In addition, backward and forward linkage effects was significantly high in some industrial sectors such as petroleum, transportation, machinery equipment, service and public administration in 3 countries. In the case of service, the linkage effects among the 3 countries increased which means that the roles and inter-dependency of service was also gradually increasing in 3 countries.

• The Journal of the Acoustical Society of Korea
• /
• 제41권5호
• /
• pp.564-569
• /
• 2022

Blood-Brain Barrier (BBB) is the brain protecting system blocking the inflow of harmful substances into brain parenchyma from brain blood vessel. However, the BBB has a negative effect on the treatment of various brain diseases such as Alzheimer's dementia or brain tumors because it also prevents drug delivery into brain parenchyma. To overcome this problem, a brain drug delivery technique using Focused Ultrasound (FUS) which allows BBB to be temporarily opened by inducing the acoustic cavitation effect of microbubbles has been developed. Thus far, various studies using the FUS technique has been conducted to improve drug delivery efficiency, and therefore, this paper discusses recently developed drug delivery technologies using the FUS-induced BBB opening.

• Journal of the Korean Geographical Society
• /
• 제48권6호
• /
• pp.856-878
• /
• 2013

This paper examines the recent changes of urban center in metropolis in terms of land use. Jung-Gu, Daegu City is analyzed for a case study, and publicly notified individual land price data of 2000 and 2011 are used as analysis materials. The analyzing results show that a lot of residential land uses diminished in urban center, but residential function is still significant despite such decrease. Commercial land uses also decreased. Office land uses increased, but the increase is insignificant. On the contrary, unused or miscellaneously used land increased considerably. The phenomena implicate that land uses in the urban center are not positive under the influence of inner city decline. Overall, more land use changes occurred in the frame than in the core of urban center. That is, land uses in the core is more stable than them in the frame. However, decreasing commercial land uses in the core is noticeable, comparing to the frame. Mixed land uses for residence and commerce are most deconcentrated and office land uses most concentrated. Mean center point and standard deviation distance of land uses did not change significantly from 2000 to 2011, despite considerable change of land uses. The finding reveals that land use changes are widely occurring in urban center.

• Journal of Energy Engineering
• /
• 제29권3호
• /
• pp.25-33
• /
• 2020

In this study, flow and structural computational analysis were performed to investigate the structural safety of the lightweight butterfly valve disc designed by topology optimization. After flow analysis, as the opening angle increased, the flow coefficient increased non-linearly and showed a gentle slop. When the opening angle was 12 degree, the cavitation could be predicted. After FE analysis, all FE von-Misses stresses of the lightweight disc were smaller than the yield strength of the material, and all FE maximum deformations were also smaller than the conservative deformation of the previous study. Ultimately, it was confirmed that the structural safety of the lightweight valve disc based on computational analysis is effective.

• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.704-707
• /
• 2012

현재 국내 농업은 고령화로 인하여 10년간 전체 농촌인구의 3분의 1이 감소하고 있으며 농업 인구의 공동화 현상이 진행되고 있다. 농촌 인구의 인력을 해결하기 위해서 농업 선진국들은 적은 인력으로 생산성을 증대하기 위해서 자동화 시스템을 도입하고 있다. 따라서 국내 농업 생산성 증대를 위해 자동화 시스템은 필수적이며 도입으로 인하여 인력 부족 현상을 해결하고 농가 소득을 필요성이 중요시되고 있다. 따라서 진정한 무인 자동화 시스템이 가능하려면 신뢰성이 보장되면서 일반 농가에서도 부담 없이 도입 할 수 있는 저가의 시스템이 필요하다. 이러한 시스템을 필요로 하는 농가에 시스템을 구축 시 들어가는 구축비용을 줄이기 위해 저가의 센서들을 네트워크로 연결하여 안정적으로 동작하는 서버 개발이 필요하며 이러한 서버를 통하여 실시간으로 손쉽게 눈으로 확인하기 위하여 스마트폰과에 연계 기술이 필요하다. 본 연구에서는 온도, 습도, Co2등의 다양한 영농 환경 정보들을 수집하고 이를 스마트폰으로 통하여 실시간으로 확인하게 할 뿐만 아니라 원격제어를 통하여 천장계폐와 LED를 손쉽게 제어 할 수 있도록 하였다. 이렇게 설계된 시스템으로 제어뿐만 아니라 수집된 데이터를 통하여 농가 환경을 분석하기 위한 정보로써 활용 될 수 있으며 유무선 공유기를 통하여 언제 어디서든 네트워크가 연결된 곳이라면 시스템에 접근이 가능 하도록 하였다.