• 제목/요약/키워드: 공기 부상

검색결과 164건 처리시간 0.03초

LP가스 용기 과류 차단 밸브 개발

  • 임종국;이인찬
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 2002년도 추계 학술논문발표회 논문집
    • /
    • pp.105-109
    • /
    • 2002
  • 최근 빈번하게 발생되고 있는 가스사고는 많은 인명과 재산상의 손실을 초래하고 있다. 특히 도시 가스 보다는 공기보다 비중이 큰 LP가스에 의한 사고가 많이 발생된다. 특히 최근에 발생한 인천 부평구의 LP가스 폭발사고는 사망6명, 부상21명 등 총 27명의 인명피해와 주택 붕괴 등 많은 재산상의 손실을 초래하였다. 또한 LP가스 용기는 용기자체가 자해나 위해의 수단으로 이용되기도 한다. 이에 따라 정부에서는 1998년 1월 10일 고압가스안전관리법 시행규칙을 개정하여 LP가스용기에 부착되어 사용되는 밸브를 과류차단형으로 의무화하여 가스사고예방을 위해 힘쓰고 있다.(중략)

  • PDF

경량전철(Light rail transit)의 이해-III

  • 이안호;이덕영;조용석;권순섭
    • 한국철도학회지
    • /
    • 제6권2호
    • /
    • pp.22-32
    • /
    • 2003
  • 차륜없이 전자석에 의해 부상하고, 리니어모터에 의해 추진하는 시스템이다. HSST의 가장 큰 장점은, 접촉지짖에 의한 저소음 및 공기저항외에는 주행저항이 없기 때문에 고속주행이 가능하다. HSST도 당초에는 최고속도 200∼300km/h 정도의 시스템 HSST-200, HSST-300 타입을 목표로 개발을 진행해왔지만, 최근에는 급구배 및 급곡선 통과가 가능한 특성을 활용하여 도시내 교통을 대상으로 하는 최고속도 100km/h 정도의 시스템 HSST-100 타입 개발에도 주력함으로써 실용화에 달하고 있다. 경량전철로서의 취급하고 있는 시스템은 HSST-100 타입이다.(중략)

공기윤활 범프 저어널 베어링의 부상 특성에 관한 연구 (A Study on the Lift-off Characteristics of an Air-lubricated Bump Foil Journal Bearing)

  • 이남수;이용복;최동훈;김창호
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제33회 춘계학술대회 개최
    • /
    • pp.236-242
    • /
    • 2001
  • In this paper the effect of bump compliance, load, and the number of pad on the lift-off speed is studied. When the load is greater and bump compliance lower, the shaft is lifted off at higher rotating speed. And when the load is applied near the center of pad, lift-off speed is lower. When the number of pad increases, the lift-off speed is higher. The lift-off characteristics can be used to lengthen the life time of the coating and design the rotating machinery supported by bump bearings.

  • PDF

SA 기법을 이용한 광디스크 드라이브 공기베어링 슬라이더의 최적설계 (The Optimal Design of Air Bearing Sliders of Optical Disk Drives by Using Simulated Annealing Technique)

  • 장혁;김현기;김광선;임경화
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집C
    • /
    • pp.316-321
    • /
    • 2001
  • The optical storage device has recently experienced significant improvement, especially for the aspects of high capacity and fast transfer rate. However, it is necessary to study a new shape of air bearing surface for the rotary type actuator because the optical storage device has the lower access time than that of HDD (Hard Disk Drives). In this study, we proposed the air bearing shape by using SA (Simulated Annealing) algorithm which is very effective to achieve the global optimum instead of many local optimums. The objective of optimization is to minimize the deviation in flying height from a target value 100nm. In addition, the pitch and roll angle should be maintained within the operation limits.

  • PDF

공기압 서보 설린더 특성 해석 (Charncteristics Analysis of the Pneumatic Servo Cylinder)

  • 김동수;김강대;김명섭;허신
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1244-1249
    • /
    • 2008
  • This paper shows a perfonnance analysis for pneumatic servo cylinder. The pistons without seal have partly cylindrical and conical shapes. 2 dimensional Reynolds equation and FD(finite differential) numerical techniques are utilized for the perfonnance analysis. The relationship among self-centering forces and leakage flows are investigated. Also, optimal design values for a servo cylinder are presented. A prototype of servo cylinder which had rod bearing with four pockets, five pockets, and six pockets was manufactured respectively.

  • PDF

공기 베어링 효과를 고려한 HDD 서스펜션 시스템의 트랙탐색 동특성 (Track Seek Dynamics of HDD Suspension System Considering Air Bearing Effects)

  • 김정주;박노열;강태식;정태건
    • 대한기계학회논문집A
    • /
    • 제25권2호
    • /
    • pp.198-205
    • /
    • 2001
  • Recently, almost all hard disk drives employ the rotary actuator system. The performance of an HDD depends on the accuracy and speed of tracking motion. We study the dynamics of head-suspension assembly during track seek. We develop the numerical analysis program to study the dynamic characteristics of HDD suspension system considering the air bearing effects. The track seek simulation by using the developed program helps to estimate the effect of the suspension vibration on the air bearing dynamics. We calculate the behaviour of the air bearing for the given track seek profile and calculate the positioning error during track seek process due to the lateral deflection of the suspension.

헵탄 풀화재에서 화염안정성에 관한 주위류 효과 (The coflow effects on the flame stability of Heptane pool fire)

  • 정태희;이의주
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2012년도 춘계학술발표회 초록집
    • /
    • pp.258-261
    • /
    • 2012
  • 풀화재에서 화염화염진동은 주위공기와의 밀도차에 의한 부력효과에 기인하여 주로 발생한다. 본 연구는 풀화재의 화염불안정성에 대해 산화제 유속 및 농도 변화에 따른 효과를 검토하기 위하여 컵버너 실험을 수행하였다. 실험결과는 산화제의 농도를 변화시켰을 경우에는 산화제의 불활성기체의 농도가 증가할수록 청염의 길이가 길어지고 컵버너 끝단으로부터 부상되는 것이 관찰된다. 한편, 산화제의 유속이 증가함에 따른 진동주파수가 감소함을 보인다. 이는 무차원 변수로 표현되는 주파수와 부력의 관계로 도시하였을 때 다양한 속도스케일을 사용할 수 있었지만, 연료와 산화제의 유속차로 정의되는 특성속도인 경우에 정지되어 있는 공기중에서의 풀화재 진동과 일치하는 관계식을 얻을 수 있었다. 그리고 진동주파수는 산화제 희석율과는 특정한 관계를 보이지 않는데 이는 국부적 화염구조와 연관성을 가지기 때문으로 판단된다.

  • PDF

차세대 고효율 용존공기 부상공정(High Rate DAF)의 개발 (Development of Dissolved Air Flotation Technology from 1st Generation to the Newest or 3rd One (Very Thick Microbubble Bed) with High Flowrates DAF in Turbulent Flow Conditions)

  • Kiuru, H.J.
    • 상하수도학회지
    • /
    • 제18권2호
    • /
    • pp.228-234
    • /
    • 2004
  • Dissolved air flotation (DAF), in which suspended solids are removed from water by means of micro-size air bubbles raising slowly up in water and lifting solids from water (smaller than those) attached onto the micro-bubbles as well as those (larger than solids) being attached on these, have been used in water and wastewater since 1920s. The dissolved air flotation technology was originally based on the laminar flow conditions prevailing in water to be treated, but the latest development in that technology has led now to a situation, in which the flow conditions may also be turbulent ones in the modem dissolved air flotation units. Despite of that, the flotation phenomenon used in this unit operation for removal suspended solids from water or wastewater is still the same.

익형 변화에 따른 유도공기부상기 성능특성 연구 (Effects of Blade Configuration on the Performance of Induced Gas Flotation Machine)

  • 송유준;이지구;김윤제
    • 한국유체기계학회 논문집
    • /
    • 제20권2호
    • /
    • pp.41-46
    • /
    • 2017
  • The flotation performance of the induced gas flotation (IGF) machine is considerably influenced by geometric configurations of rotor and stator. The interaction of rotor and stator, which are the most important components in IGF, serves to mix the air bubbles. Thus, the understanding of flow characteristics and consequential analysis on the machine are essential for the optimal design of IGF. In this study, two-phase (water and air) flow characteristics in the forced-air mechanically stirred Dorr-Oliver flotation cell was investigated using ANSYS CFX. In addition, the void fraction and the velocity distributions are determined and presented with different blade configurations.