• 한국식품과학회지
• /
• 제27권6호
• /
• pp.827-833
• /
• 1995

살균 매체로서 스팀에 의해 가열된 열수와 공기의 혼합물을 사용하는 열수식 살균기에 대하여 1회 살균시 파우치의 투입량을 달리 하면서 온도 분포 시험을 행하였다. 시험에 사용된 살균 tank의 부피는 5,900 liter정도이며 190g 용량의 레토르트 파우치를 최대 6000개까지 한번에 살균할 수 있다. 설정 살균 온도 및 시간은 $122^{\circ}C$ 및 23분이었고 살균중 압력은 $1.8{\sim}2.0\;kg/cm^2$로 유지시켰다. 살균중 평균 온도가 가장 높았던 부분은 살균기 윗부분이었고 중간 부분과 아fot부분은 뚜렷한 경향을 보이지 않았다. 예비 살균 시간과 냉각 시간을 뺀 실제 살균 시간중 최대 평균 온도차는 파우치를 투입하지 않았을때(P-0)와 3000개의 파우치를 투입하였을 때(P-3000)에는 $1.7^{\circ}C$ 이하로 양호한 수준이었으나 6000개의 파우치를 투입하였을 때(P-6000)에는 $1.9^{\circ}C$ 이상으로 다소 높은 수준이었다. 평균 온도에 대한 표준 편차도 위치에 따라 다소간의 차이는 있었지만 6000개의 파우치를 살균할때에는 상대적으로 큰 편이었다. 즉석 카레 소스는 살균시 broken heating curve의 경향을 나타내었고 살균중 평균 온도가 가장 높은 부분과 가장 낮은 부분에서 측정된 즉석 카레 소스의 살균도(F값)의 차이는 10.93으로 나타났다. 관능검사 결과 10.93의 차이는 즉석 카레 소스의 품질에 영향을 미치지 않음을 알 수 있었다.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• 설비공학논문집
• /
• 제12권12호
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1234-1268
• /
• 2004

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.

• 한국가축번식학회지
• /
• 제26권1호
• /
• pp.17-23
• /
• 2002

본 연구는 지금까지 돼지 난포란 성숙을 위해서 많이 사용하고 있는 mTCM-199, mWaymouth MB 752/1 그리고 NCSU-23 성숙배지를 비교하고 액상정액을 이용한 체외수정 방법을 개발하고자 실시하였다. 미성숙 난포란은 0.5 $m\ell$의 성숙배지에 각 well 당 30~40개씩 적하하였고, 38.5$^{\circ}C$, 5% CO2, 95% 공기로 조절된 CO2 배양기에서 44시간 성숙 시켰다. 미성숙 난포란을 mTCM-199, mWaymouth MB 752/l 그리고 NCSU-23 성숙배지에서 44시간 배양한 결과 CVBD 발생율은 각각 95.6, 94.1 그리고 94.9%였으며, MH단계까지의 성숙율은 각각 92.5, 90.1 그리고 91.1%였다. 성숙배지별, GVBD 발생율과 MH까지의 성숙율간에 유의성은 인정되지 않았다. 액상정액의 제조용 정액은 90% 이상의 운동성을 가진 농후정자부분을 사용하였으며 정액 채취 후 2시간 동안에 22~24$^{\circ}C$의 실온까지 냉각시켰다.실온까지 냉각한 정액은 BTS 희석액으로 2$\times$$10^{8}$ $m\ell$ 정자농도로 조정하여 100 $m\ell$ 플라스틱병에 30 $m\ell$씩 주입하여 17$^{\circ}C$에서 5일간 보관하였다. 5일 보관 후 운동성이 70% 이상인 정자를 체외수정에 이용하였다. 성숙 후 cumulus cell들이 제거된 성숙난포란은 0.5 $m\ell$의 mTCM-199 또는mTBM 수정배지에 30~40개씩 적하하고, 최종정자농도를 2$\times$$10^{6}$$m\ell$되도록하여 6시간 동안 수정시켰다. 체외수정시킨 수정란들은 0.5 $m\ell$의 NCSU-23 배양배지에서 수정 후 6시간 배양하여 정자침입율, 다정자침입율 그리고 웅성전핵형성율을 조사하였고, 수정 후 45시간 배양하여 난할율을 조사하였다. NC-SU-23 성숙배지와 mTBM 수정배지를 이용하였을때 웅성전핵형성율이 48.0%로써 mTCM-199 성숙배지와 수정배지 또는 mWaymouth MB 752/1 성숙배지와 mTCM-199 수정배지를 이용하였을 때보다 웅성 전핵 형성율이 높았다. 2~4세포기까지의 난할율은 mTCM-199 성숙, 수정 및 배양배지에서 24.1%, mWaymouth 752/1 성숙배지, mTCM-199 수정 및 배양배지에서 43.6%, 그리고 NCSU-23 성숙배지, mTBM 수정배지 및 WCSU-23 배양배지를 이용한 것이 71.2%였다. 이상의 결과를 종합하면 BTS 희석액으로 17$^{\circ}C$에서 5일 보존한 액상정액으로 체외수정이 가능함을 입증하였고, NCSU-23 성숙배지, mTBM 수정배지 및 NCSU-223 배지가 미성숙 난포란의 성숙, 수정 및 배양에 우수한 배지임을 입증하였다.

• 한국가축번식학회지
• /
• 제26권1호
• /
• pp.1-7
• /
• 2002

본 연구는 mTCM-199, mWaymouth MB 752/1 그리고 NCSU-23 성숙배지에서 성숙시킨 난포란을 mTBM 수정배지에서 액상정액의 정자를 이용하여 주입정자 농도별로 체외 수정시킴으로써 액상정액을 이용한 새로운 체외수정 방법을 개발하고자 실시하였다. 미성숙 난포란은 0.5 $m\ell$의 성숙배지에 각 well 당 30~40개씩 적하하였다. 액상정액 제조용 정액은 90% 이상의 운동성을 가진 농후정자부분을 사용하였으며 정액채취 후 2시간 동안에 22~24$^{\circ}C$의 실온까지 냉각시켰다. 실온까지 냉각한 정액은 BTS 희석액으로 2$\times$$10^{8}$ $m\ell$ 정자농도로 조정하여 100$m\ell$ 플라스틱병에 30 $m\ell$씩 주입하여 17$^{\circ}C$에서 5일 보관하였다. 5일 보관후 운동성이 70% 이상인 정자를 체외수정에 이용하였다. 38.5$^{\circ}C$, 5% $CO_2$, 95% 공기로 조절된 CO2 배양기에서 44시간 성숙 후 cumulus cell들이 제거된 성숙 난포란은 0.5 $m\ell$의 mTBM 수정배지에 30~40개씩 적하하고 최종정자농도를 1, 2, 4, 6 그리고 10$\times$$10^{6}$$m\ell$되도록하여 주입하고 6시간 동안 수정시켰다. 체외수정시킨 수정란들은 수정 후 6시간 동안 0.5$m\ell$의 NCSU-23 배양배지에서 배양한 후 정자침입율, 다정자침입율 그리고 웅성전핵 형성율을 조사하였다. mTCM-199, mWaymouth MB 752/1 그리고 NCSU­23 성숙배지에서 성숙시킨 난포란을 mTBM 수정배지에서 액상정 액으로 체외수정 한 결과 NCSU-23 성숙배지에서 성숙한 난포란이 웅성전핵형성율이 높았고 다정자침입율이 낮았다. NCSU-23 성숙배지에서 성숙한 난포란을 mTBM 수정배지에서 수정할 경우 최적정자농도는 2~4$\times$$10^{6}$$m\ell$이었으며, 정자침입율은 50.8~50.9%, 다정자침입율은 13.3~19.5% 그리고 웅성전핵형 성율은 43.9~45.4%였다. 결론적으로 NCSU-23 성숙배지에서 성숙되고 mTBM 수정배지에서 수정된 난포란은 mTCM-199이나 mWaymouth MB 752/1 성숙배지에서 성숙되고 mTBM 수정배지에서 수정된 난포란보다 우수한 체외수정 결과를 나타내었다. 17$^{\circ}C$에서 5일 동안 보존한 액상정액으로 NCSU-23 배지에서 성숙한 난포란을 체외수정하기 위한 최적정자농도는 2~4$\times$$10^{6}$$m\ell$이었다.

• 대한치과보철학회지
• /
• 제56권3호
• /
• pp.179-187
• /
• 2018

목적: 본 연구의 목적은 임플란트 고정성 보철물의 시멘트 소환을 위해 가한 열이 임플란트 티타늄 지대주 및 지대주 나사의 풀림토크와 파절강도에 미치는 영향을 조사하는 것이다. 재료 및 방법: 임플란트와 티타늄 지대주 및 지대주 나사를 20개씩 준비하였다. 지대주와 나사는 가열하지 않은 것을 대조군으로, 진공소성로에서 $450^{\circ}C$까지 8분간 가열 후 공기 중에서 냉각한 것을 실험군으로 분류하였다. 임플란트에 지대주 및 나사를 연결하고 30 Ncm의 힘으로 10분 간격으로 2회의 조임력을 가하고 15분 후 풀림토크를 측정하였고 만능시험기를 이용하여 지대주 나사의 파절강도를 측정하였다. 결과: 평균 풀림토크는 대조군에서 $27.84{\pm}1.07Ncm$, 실험군에서 $26.55{\pm}1.56Ncm$이었고 통계적으로 유의한 차이를 보였다 (P < .05). 평균 파절강도는 대조군에서 $731.47{\pm}39.46N$, 실험군에서 $768.58{\pm}46.73N$이었고 통계적으로 유의한 차이를 보이지 않았다 (P > .05). 결론: 임플란트 고정성 보철물의 시멘트 소환을 위해 가한 열이 티타늄 지대주 나사의 풀림토크를 유의하게 감소시켰고 파절강도에는 영향을 주지 않았다. 따라서 시멘트 소환을 위해 보철물 및 지대주의 조립체에 열을 가하는 경우에는 지대주 나사를 미리 빼내어 따로 보관하거나 부득이하게 열을 가한 지대주 나사는 재사용에 주의가 필요할 것으로 사료되나 임상적인 재사용 여부를 평가하기 위해서는 추가적인 연구가 필요하다.