• 제목/요약/키워드: 공기정압주축

검색결과 7건 처리시간 0.024초

초고속 복합재료 공기정압 주축의 설계 (Design of High Speed Composite Air Spindle System)

  • 장승환;이대길;한흥삼
    • Composites Research
    • /
    • 제14권1호
    • /
    • pp.47-56
    • /
    • 2001
  • 공기정압 주축 시스템의 동적 안정성을 향상시키기 위해 섬유강화 복합재료 주축 자성 분말이 함침된 에폭시 복합재료 회전자 및 알루미늄 재질의 공구 연결부로 구성된 주축 시스템을 설계 및 제작하였다. 복합재료 공기정압 주축 시스템의 최적 설계를 위해 구조의 공진 주파수와 변형량 등을 고려하여 복합재료 주축의 적층 각도와 두께를 결정하였다 해석결과 설계된 복합재료 주축 시스템은 기존의 금속 주축 시스템에 비해 36% 더 높은 공진 주파수를 가지는 것을 알 수 있었다. 계산 및 실험 결과를 통해서 섬유강화 복합재료 주축과 자성 분말이 함침된 에폭시 복합재료 회전자로 구성된 복합재료 주축-회전자 시스템은 높은 비 강성으로 인해 기존 주축 시스템의 동적특성을 향상시킬 수 있음을 확인하였다.

  • PDF

고속 공기 주축부를 위한 복합재료 주축의 최적 설계 (Optimal Design of a High Speed Carbon Composite Air Spindle)

  • 방경근;이대길
    • 대한기계학회논문집A
    • /
    • 제25권11호
    • /
    • pp.1767-1776
    • /
    • 2001
  • For the stable operation of high speed air spindle, the low rotational inertia and high damping ratio of spindle shafts as well as high fundamental natural frequency are indispensable. Conventional steel spindles are net appropriate for very high speed operation because of their high rotational inertia and low damping ratio. In this study, a high speed spindle composed of carbon fiber epoxy composite shaft and steel flange was designed for maximum critical speed considering minimum static deflection and radial expansion due to bending load and centrifugal force during high speed relation. The stacking angle and the stacking thickness of the composite shaft and the adhesive bonding length of the 7teel flange were selected through vibrational analysis considering static and thermal loads due to temperature rise.

공기정압 베어링의 정 동특성에 관한 연구 (Static and Dynamic Characteristics of Aerostatic Gas Bearing)

  • 전경석;한동철
    • Tribology and Lubricants
    • /
    • 제6권2호
    • /
    • pp.60-67
    • /
    • 1990
  • 최근 전자 및 광학 분야에 있어서의 눈부신 발전은 다면경 가공기나 초정밀 연삭기와 같은 초정밀 가공기계의 개발과 실용화에 힘입은 바 크다. 이러한 초정밀 가공기의 성능을 좌우하는 핵심 요소로서 추축계를 들수 있으며, 비교적 소형 경량의 공박물을 가공하는 기계의 주축용 베어링으로는 오일 베어링을 대신하여 공기 베어링이 점차 널리 사용되고 있다. 이러한 가공기에 많이 사용되는 외부 가압 공기 베어링은 동압 공기 베어링과는 달리, 외부에서 가압된 압축공기에 의하여 공기막을 형성하므로, 시동과 정지시 마멸이 없고 저속에서도 비교적 높은 하중 지지력을 얻을 수 있으며, 오일 베어링과 비교하여서는 발열이 적고 윤활제의 유출에 의한 오염의 위험이 없다는 특성외에 공기막에 의한 평균화 효과에 의하여 고정도의 운전이 가능하다는 장점이 있다. 본 연구에서는 점급기원의 가정하게 직접 수치해법을 사용하는 해석 프로그램을 작성하여, 무차원화된 설계 변수들에 대한 외부가압 공기베어링의 정$\cdot$동특성수들을 구하고자 한다.

복합재료 공기정압 주축부 (Composite Aerostatic Spindle)

  • 방경근;장승환;이대길
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 1999년도 추계학술발표대회 논문집
    • /
    • pp.134-138
    • /
    • 1999
  • For the stable operation of high speed aerostatic spindle, the low rotational inertia and high damping ratio of spindle shafts as well as high fundamental natural frequency are indispensable. Conventional steel spindles are not appropriate for very high speed operation because of their high rotational inertia and low damping ratio. In this study, the composite spindles with aerostatic bearing were designed and manufactured with carbon fiber/epoxy composite. The fundamental natural frequency of the composite spindle was evaluated through the modal testing.

  • PDF

웨이퍼 연마용 지능형 연삭시스템 개발 (Development of the intelligent grinding system for wafer grinding)

  • 김동석;최춘규;하상백;이상직
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1082-1086
    • /
    • 2004
  • In silicon wafer manufacturing process, the grinding process has been adopted to improve the flatness of wafer. The grinding of wafer is usually used by the infeed grinding machine. The infeed grinding machine has been depended on imports. Therefore, it is necessary to develop the infeed grinding machine because the demand of the infeed grinding machine is increasing more and more. This paper describes the technologies of infeed grinding machine and intend to introduce the studies in the development of the intelligent grinding system for grinding of wafer. The air bearing spindle for the infeed grinding machine was developed by domestic technologies and the grinding part design of the intelligent grinding system for wafer grinding was completed.

  • PDF